Nissan Sentra. Manual — part 759
SEC-64
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
P1611 ID DISCORD, IMMU-ECM
P1611 ID DISCORD, IMMU-ECM
DTC Logic
INFOID:0000000009756702
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of ENGINE using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009756703
1.
PERFORM INITIALIZATION
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK SELF DIAGNOSTIC RESULT
1. Select Self Diagnostic Result mode of ENGINE using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC P1611. Refer to
.
Is DTC detected?
YES
>> GO TO 3.
NO
>> Inspection End
3.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 4.
4.
REPLACE ECM
1. Replace ECM.
EC-485, "Removal and Installation"
.
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
P1611
ID DISCORD, IMMU-ECM
The ID verification results between BCM
and ECM are invalid.
• BCM
• ECM
P1612 CHAIN OF ECM-IMMU
SEC-65
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
P1612 CHAIN OF ECM-IMMU
DTC Logic
INFOID:0000000009756704
DTC DETECTION LOGIC
NOTE:
• If DTC P1612 is displayed with DTC U1000 (for BCM), first perform the trouble diagnosis for DTC U1000.
.
• If DTC P1612 is displayed with DTC U1010 (for BCM), first perform the trouble diagnosis for DTC U1010.
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of ENGINE using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009756705
1.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Does the engine start?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
REPLACE ECM
1. Replace ECM.
EC-485, "Removal and Installation"
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
P1612
CHAIN OF ECM-IMMU
Inactive communication between ECM
and BCM
• Harness or connectors
(The CAN communication line is open or
shorted.)
• BCM
• ECM
SEC-66
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B2192 ID DISCORD, IMMU-ECM
B2192 ID DISCORD, IMMU-ECM
DTC Logic
INFOID:0000000009756706
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009756707
1.
PERFORM INITIALIZATION
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK SELF-DIAGNOSIS RESULT
1. Select “Self Diagnostic Result” mode of “BCM” using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2192. Refer to
Is DTC detected?
YES
>> GO TO 3.
NO
>> Inspection End
3.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 4.
4.
REPLACE ECM
1. Replace ECM.
EC-485, "Removal and Installation"
.
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2192
ID DISCORD BCM-ECM
The ID verification results between
BCM and ECM are NG.
• BCM
• ECM
B2193 CHAIN OF ECM-IMMU
SEC-67
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2193 CHAIN OF ECM-IMMU
DTC Logic
INFOID:0000000009756708
DTC DETECTION LOGIC
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009756709
1.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
Does the engine start?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
REPLACE ECM
1. Replace ECM.
EC-485, "Removal and Installation"
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2193
CHAIN OF BCM-ECM
Inactive communication between BCM
and ECM
• Harness or connectors
(The CAN communication line is open or
shorted.)
• BCM
• ECM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст