Nissan Sentra. Manual — part 742
SB-10
< REMOVAL AND INSTALLATION >
FRONT SEAT BELT
SEAT BELT HEIGHT ADJUSTER
Removal
1. Remove the center pillar upper finisher. Refer to
INT-28, "CENTER PILLAR UPPER FINISHER : Removal
2. Remove the D-ring anchor bolt.
3. Remove the seat belt height adjuster bolts and the seat belt height adjuster.
Installation
Installation is in the reverse order of removal.
• Make sure that the seat belt height adjuster is locked in the lowest position during installation.
• Make sure both the D-ring anchor and seat belt height adjuster operate freely.
• Tighten the D-ring anchor bolt and seat belt height adjuster bolts to specification. Refer to
.
SEAT BELT BUCKLE
Removal
1. Remove the front seat assembly. Refer to
SE-18, "DRIVER SIDE : Removal and Installation - Seat
(front seat driver side) or
SE-20, "PASSENGER SIDE : Removal and Installation - Seat
(front seat passenger side).
2. Disconnect the harness connector from the seat belt buckle.
3. Remove the seat belt buckle anchor bolt and the seat belt buckle.
Installation
Installation is in the reverse order of removal.
• During installation, make sure the seat belt buckle anchor bolt (A)
is inserted through the components in the following order:
• Tighten the seat belt buckle anchor bolt to specification. Refer to
.
1.
Wave washer
2.
Seat belt buckle
3.
Spacer
4.
Star washer
ALHIA0234GB
REAR SEAT BELT
SB-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
REAR SEAT BELT
Exploded View - Seat Belt Retractor
INFOID:0000000009756330
SEAT BELT RETRACTOR
Removal and Installation - Seat Belt Retractor
INFOID:0000000009756331
REMOVAL
1. Remove the rear parcel shelf finisher. Refer to
INT-33, "Removal and Installation"
.
2. Remove the seat belt retractor anchor bolt and the seat belt retractor.
INSTALLATION
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
• Tighten the seat belt retractor bolts to specification. Refer to
SB-11, "Exploded View - Seat Belt Retractor"
.
ALHIA0294ZZ
1.
Seat belt retractor (RH)
2.
Seat belt retractor (center)
3.
Seat belt retractor (LH)
Front
SB-12
< REMOVAL AND INSTALLATION >
REAR SEAT BELT
Exploded View - Seat Belt Buckle
INFOID:0000000009756332
SEAT BELT BUCKLE
Removal and Installation - Seat Belt Buckle
INFOID:0000000009756333
REMOVAL
1. Remove rear seat cushion assembly. Refer to
SE-23, "Removal and Installation - Seat Cushion Assem-
2. Remove seat belt buckle anchor bolt and the seat belt buckle.
INSTALLATION
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
• Tighten the seat belt buckle anchor bolt to specification. Refer to
SB-11, "Exploded View - Seat Belt Retrac-
ALHIA0295ZZ
1.
Seat belt buckle (RH)
2.
Seat belt buckle (center)
3.
Seat belt buckle (LH)
Front
LATCH SYSTEM FOR CHILDREN
SB-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SB
N
O
P
LATCH SYSTEM FOR CHILDREN
Exploded View
INFOID:0000000009756334
Removal and Installation
INFOID:0000000009756335
REMOVAL
1. Remove the rear seat cushion assembly. Refer to
SE-23, "Removal and Installation - Seat Cushion
2. Remove the rear seatback assembly. Refer to
SE-23, "Removal and Installation - 60:40 Split Seatback"
3. Remove the LATCH bracket bolts and the LATCH bracket.
INSTALLATION
Installation is in the reverse order of removal.
• Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
.
• Tighten the LATCH bracket bolts to specification. Refer to
1.
LATCH bracket (RH)
2.
LATCH bracket (LH)
3.
Seat belt buckle anchor bracket
Front
ALHIA0286ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст