Nissan Sentra. Manual — part 700
PG
BATTERY
PG-51
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
Removal and Installation (Battery Bracket)
INFOID:0000000009757201
REMOVAL
1. Remove air cleaner and air duct. Refer to
EM-25, "Removal and Installation"
.
2. Remove battery. Refer to
PG-50, "Removal and Installation (Battery)"
.
3. Remove CVT breather hose bracket bolt (A) and CVT breather
hose bracket (1) (if equipped).
4. Remove battery bracket bolts and battery bracket.
5. Remove harness clip from battery bracket.
INSTALLATION
Installation is in the reverse order of removal.
ALMIA0594ZZ
PG-52
< REMOVAL AND INSTALLATION >
BATTERY TERMINAL WITH FUSIBLE LINK
BATTERY TERMINAL WITH FUSIBLE LINK
Exploded View
INFOID:0000000009757202
Removal and Installation
INFOID:0000000009757203
REMOVAL
1. Loosen the battery terminal nuts and disconnect both battery negative and positive terminals. Refer to
CAUTION:
To prevent damage to the parts, disconnect the battery negative terminal first.
2. Remove harness nut and battery terminal with fusible link nut.
3. Disconnect harness connectors and remove battery terminal with fusible link.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
To prevent damage to the parts, connect the battery positive terminal first.
Reset electronic systems as necessary. Refer to
PG-7, "ADDITIONAL SERVICE WHEN REMOVING BAT-
TERY NEGATIVE TERMINAL : Special Repair Requirement"
.
1.
Battery terminal with fusible link
2.
Harness connector
ALMIA0952ZZ
PG
BATTERY CURRENT SENSOR
PG-53
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BATTERY CURRENT SENSOR
Exploded View
INFOID:0000000009757204
Removal and Installation
INFOID:0000000009757205
REMOVAL
1. Loosen the battery terminal nut and disconnect battery negative terminal. Refer to
.
2. Disconnect the harness connector from current sensor.
3. Remove the battery current sensor from the negative terminal.
INSTALLATION
Installation is in the reverse order of removal.
Reset electronic systems as necessary. Refer to
PG-7, "ADDITIONAL SERVICE WHEN REMOVING BAT-
TERY NEGATIVE TERMINAL : Special Repair Requirement"
.
1. Battery current sensor
2. Current sensor harness connector
ALMIA0953ZZ
PG-54
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Battery
INFOID:0000000009757206
Type
GR21
20 hour rate capacity
[V – Ah]
12 – 49
Cold cranking current (For reference value)
[A]
470
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст