Nissan Sentra. Manual — part 602
INTERIOR ROOM LAMP
INL-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
INTERIOR ROOM LAMP
Removal and Installation
INFOID:0000000009757604
REMOVAL
1. Insert a suitable tool into the gap between the headlining and the interior room lamp and release the inte-
rior room lamp.
2. Disconnect the harness connector from the interior room lamp.
INSTALLATION
Installation is in the reverse order of removal.
Bulb or Lens Replacement
INFOID:0000000009757605
WARNING:
Do not touch bulb while it is lit or right after being turned OFF. Burning may result.
CAUTION:
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
1. Using a suitable tool, release the pawls and remove the interior room lamp lens from the interior room
lamp.
2. Remove the interior room lamp bulb.
3. Install the interior room lamp bulb to the interior room lamp.
4. Install the interior room lamp lens.
INL-56
< REMOVAL AND INSTALLATION >
TRUNK ROOM LAMP
TRUNK ROOM LAMP
Removal and Installation
INFOID:0000000009757606
WARNING:
Do not touch bulb while it is lit or right after being turned OFF. Burning may result.
CAUTION:
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
1. Release the tab (B) to open the lens.
: Front
2. Remove the trunk room bulb (2).
3. Release tab (C), then pull trunk room lamp (1) down to remove.
4. Disconnect the harness connector (A) from the trunk room lamp.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000009757607
WARNING:
Do not touch bulb while it is lit or right after being turned OFF. Burning may result.
CAUTION:
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to bulb.
1. Release the tab to open the lens.
2. Remove bulb from trunk room lamp.
3. Install bulb to trunk room lamp.
4. Close lens.
ALLIA1154ZZ
ILLUMINATION CONTROL SWITCH
INL-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ILLUMINATION CONTROL SWITCH
Removal and Installation
INFOID:0000000009757608
REMOVAL
1. Remove instrument finisher D. Refer to
2. Remove the illumination control switch (1) from the switch car-
rier (2) using suitable tool (A).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
ALLIA1207ZZ
INL-58
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000010305140
*: Always check with the Parts Department for the latest parts information.
Item
Wattage (W)*
Map lamp
LED
Vanity mirror lamp (if equipped)
2.0
Glove box lamp
-
Interior room lamp (if equipped)
8
Trunk room lamp
3.4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст