Nissan Sentra. Manual — part 655
MWI-66
< DTC/CIRCUIT DIAGNOSIS >
WASHER FLUID LEVEL SWITCH CIRCUIT
YES
>> Inspection End.
NO
>> Replace washer fluid level switch.Refer to
MWI
THE FUEL GAUGE INDICATOR DOES NOT OPERATE
MWI-67
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYMPTOM DIAGNOSIS
THE FUEL GAUGE INDICATOR DOES NOT OPERATE
Description
INFOID:0000000009758297
Fuel gauge will not indicate from a certain position.
Diagnosis Procedure
INFOID:0000000009758298
1.
CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT
Check the fuel level sensor signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
COMPONENT INSPECTION
Perform components inspection for the fuel level sensor unit and combination meter. Refer to
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK FLOAT INTERFERENCE
Check that the float arm interferes with or binds to other components in the fuel tank.
Is the inspection result normal?
YES
>> Replace fuel level sensor unit. Refer to
FL-6, "Removal and Installation"
.
NO
>> Repair or replace malfunctioning parts.
MWI-68
< SYMPTOM DIAGNOSIS >
THE STEERING SWITCH (METER CONTROL SWITCH) IS INOPERATIVE
THE STEERING SWITCH (METER CONTROL SWITCH) IS INOPERATIVE
Description
INFOID:0000000009758299
If any of the following malfunctions is found for the steering switch (meter control switch) operation.
• All switches are inoperative
• The specified switch cannot be operated
Diagnosis Procedure
INFOID:0000000009758300
1.
CHECK STEERING SWITCH SIGNAL CIRCUIT
Check the steering switch signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK STEERING SWITCH (METER CONTROL SWITCH)
Check the steering switch. Refer to
MWI-55, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NG
>> Replace steering switch. Refer to
MWI
THE ILLUMINATION CONTROL SWITCH IS INOPERATIVE
MWI-69
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE ILLUMINATION CONTROL SWITCH IS INOPERATIVE
Description
INFOID:0000000009758301
If any of the following malfunctions is found for the illumination control switch operation.
• All switches are inoperative
• The specified switch cannot be operated
Diagnosis Procedure
INFOID:0000000009758302
1.
CHECK ILLUMINATION CONTROL SWITCH SIGNAL CIRCUIT
Check the illumination control switch signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CHECK ILLUMINATION CONTROL SWITCH
Check the illumination control switch. Refer to
MWI-56, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NG
>> Replace illumination control switch. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст