Nissan Sentra. Manual — part 287
DLK-264
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
3.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
>> Inspection End.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000009756576
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000009756577
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-264, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000009756578
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM and front door lock actuator RH connectors.
2. Check continuity between BCM connector and front door lock actuator RH.
3. Check continuity between BCM connector and ground.
Terminals
Condition of
door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M20
66
Ground
Lock
0
→ Battery voltage → 0
67
Unlock
0
→ Battery voltage → 0
BCM connec-
tor
Terminal
Front door lock
actuator RH
connector
Terminal
Continuity
M20
66
D107
5
Yes
67
6
BCM connector
Terminal
Continuity
M20
66
Ground
No
67
DOOR LOCK ACTUATOR
DLK-265
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Replace front door lock actuator RH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
.
>> Inspection End.
REAR LH
REAR LH : Description
INFOID:0000000009756579
Locks/unlocks the door with the signal from BCM.
REAR LH : Component Function Check
INFOID:0000000009756580
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-265, "REAR LH : Diagnosis Procedure"
.
REAR LH : Diagnosis Procedure
INFOID:0000000009756581
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM and rear door lock actuator LH connectors.
2. Check continuity between BCM connector and rear door lock actuator LH connectors.
3. Check continuity between BCM connector and ground.
Terminals
Condition of
door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M20
66
Ground
Lock
0
→ Battery voltage → 0
67
Unlock
0
→ Battery voltage → 0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M20
66
D202
1
Yes
67
2
BCM connector
Terminal
Continuity
DLK-266
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
Is the inspection result normal?
YES
>> Replace rear door lock actuator LH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
>> Inspection End.
REAR RH
REAR RH : Description
INFOID:0000000009756582
Locks/unlocks the door with the signal from BCM.
REAR RH : Component Function Check
INFOID:0000000009756583
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-266, "REAR RH : Diagnosis Procedure"
REAR RH : Diagnosis Procedure
INFOID:0000000009756584
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM and rear door lock actuator RH connectors.
2. Check continuity between BCM connector and rear door lock actuator RH connectors.
3. Check continuity between BCM connector and ground.
M20
66
Ground
No
67
Terminals
Condition of
door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M20
66
Ground
Lock
0
→ Battery voltage → 0
67
Unlock
0
→ Battery voltage → 0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M20
66
D302
5
Yes
67
6
DOOR LOCK ACTUATOR
DLK-267
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Replace rear door lock actuator RH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
.
>> Inspection End.
BCM connector
Terminal
Continuity
M20
66
Ground
No
67
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст