Nissan GT-R. Manual — part 170
INTERIOR ROOM LAMP CONTROL SYSTEM
INL-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Component Description
INFOID:0000000009161888
Part
Description
BCM
• Activates the interior room lamp timer depending on the vehicle condition to turn the
interior room lamp ON/OFF.
• Turns the trunk room lamp ON /OFF according to the trunk room lamp switch status.
• Turns the step lamp ON /OFF according to any door switch status.
• Remote keyless entry receiver
• Door lock and unlock switch
Transmits the lock/unlock signal to BCM.
• Request switch
• Door switch
Inputs a switch signal to BCM.
INL-6
< SYSTEM DESCRIPTION >
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
System Diagram
INFOID:0000000009161889
System Description
INFOID:0000000009161890
OUTLINE
• Interior room lamp battery saver is controlled by BCM.
• BCM turns applicable lamps OFF depending on the vehicle condition. This function prevents the battery
from over-discharging if the driver neglect turning OFF the any lamps.
Applicable lamps
• Map lamp
• Step lamp
• Trunk room lamp
• Vanity mirror lamp
INTERIOR ROOM LAMP BATTERY SAVER FUNCTION
• When the ignition switch is turned OFF, BCM operates the timer for a period of time to cut the interior room
lamp power supply.
• BCM restart the timer when any of the following signals changes while operating the timer.
- Ignition switch status
- Door switch signal (ALL)
- Door lock/unlock signal (remote keyless entry receiver, each request switch, door lock and unlock switch)
- Trunk loom lamp switch signal
- Key switch signal (key slot)
• BCM provides the interior room lamp power supply continuously when the ignition switch position is other
than OFF.
NNLIA0072GB
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
INL-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Component Parts Location
INFOID:0000000009161891
Component Description
INFOID:0000000009161892
1.
Door switch
2.
Request switch
3.
Vanity mirror lamp
4.
Map lamp
5.
Key slot
6.
Push-button ignition switch
7.
Door lock and unlock switch
8.
Step lamp
9.
Trunk room lamp switch
10. Trunk room lamp
11. Remote keyless entry receiver
12.
BCM
A.
Front door
B.
Trunk lid lock assembly
C.
Trunk room upward
D.
Behind the display
E.
Dash side lower (passenger side)
JPLIA1201ZZ
Part
Description
BCM
Operates the interior room lamp battery saver depending on the vehicle condition to
cut the interior room lamp power supply.
• Remote keyless entry receiver
• Door Lock and unlock switch
Transmits the lock/unlock signal to BCM.
INL-8
< SYSTEM DESCRIPTION >
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
• Request switch
• Door switch
Inputs a switch signal to BCM.
Key slot
Input the Intelligent key in status to BCM.
Part
Description
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст