Nissan GT-R. Manual — part 22
AV
AUDIO AMP.
AV-83
< REMOVAL AND INSTALLATION >
[BASE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AUDIO AMP.
Exploded View
INFOID:0000000009163304
Removal and Installation
INFOID:0000000009163305
REMOVAL
1.
Remove the passenger seat. Refer to
SE-49, "Removal and Installation"
.
2.
Turn over the floor carpet (refer to
), remove the screw and disconnect the con-
nector, and then remove the audio amplifier.
INSTALLATION
Install in the reverse order of removal.
NNNIA0044ZZ
1.
Audio amp.
: Vehicle front
AV-84
< REMOVAL AND INSTALLATION >
[BASE AUDIO WITH NAVIGATION]
ANTENNA AMP.
ANTENNA AMP.
Exploded View
INFOID:0000000009163306
Removal and Installation
INFOID:0000000009163307
REMOVAL
1.
Remove the rear pillar finisher (RH). Refer to
.
2.
Remove the screw and disconnect the connector, and then remove the radio antenna amplifier from the
vehicle.
INSTALLATION
Install in the reverse order of removal.
NNNIA0045ZZ
1.
Antenna amp.
AV
SATELLITE RADIO ANTENNA
AV-85
< REMOVAL AND INSTALLATION >
[BASE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SATELLITE RADIO ANTENNA
Exploded View
INFOID:0000000009163308
Removal and Installation
INFOID:0000000009163309
REMOVAL
1.
Remove headlining assembly (rear) to secure work space between vehicle and headlining. Refer to
2.
Remove nuts, and then remove satellite radio antenna from roof panel.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof
panel may be deformed, when satellite radio antenna mounting nut tightening torque is loose.
JPNIA0487ZZ
1.
Satellite radio antenna
:
Vehicle front
AV-86
< REMOVAL AND INSTALLATION >
[BASE AUDIO WITH NAVIGATION]
MULTIFUNCTION SWITCH
MULTIFUNCTION SWITCH
Exploded View
INFOID:0000000009163310
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000009163311
REMOVAL
1.
Remove the cluster lid C. Refer to
IP-13, "Removal and Installation"
.
2.
Remove the screws (A), and then remove the multifunction
switch from the cluster lid C (upper).
INSTALLATION
Installation is the reverse order of removal.
1.
Bracket (LH)
2.
Multifunction switch
3
Cluster lid C (upper)
4.
Bracket (RH)
5.
Display unit
JPNIA1135ZZ
JPNIA1136ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст