Nissan GT-R. Manual — part 185
INSTRUMENT PANEL ASSEMBLY
IP-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009162796
Work item table
1.
Sunload sensor
2.
Front defroster grille RH
3.
Front defroster grille LH
4.
Security indicator
5.
Center speaker grille
6.
Center speaker
7.
Instrument panel assembly
8.
Instrument side finisher LH
9.
Instrument pad A
10. Side ventilator grille LH
11.
Mirror control switch
12. Instrument pad B
13. Cluster lid A
14. Steering column upper cover
15. Steering column side cover LH
16. Steering column mask LH
17. Instrument lower panel (driver)
18. Cluster lid C (lower)
19. Instrument lower cover LH
20. Glove box assembly
21. Instrument lower panel (assist)
22. Globe box damper
23. Side ventilator grille RH
24. Instrument pad C
25. Instrument side finisher RH
26. Display unit
27. Center ventilator grille LH
28. Steering column front lower cover
29. Steering column lower cover
30. Steering column mask RH
31. AV C/U
32. Set-up switch assembly
33. Socket & bulb
34. Instrument garnish RH
35. Center ventilator grille RH
36. A/C auto amp.
37. Multifunction switch
38. Cluster lid C (upper)
39. Instrument garnish LH
40. Steering column side cover RH
41. Preset switch assembly
42. Instrument garnish (upper)
PARTS
INSTRUMENT
PANEL
ASSEMBLY
COMBINATION
METER
DISPLAY UNIT
AV control unit
CENTER
CONSOLE
ASSEMBLY
Rear console assembly
[1]
[1]
Instrument garnish LH
[2]
[1]
[1]
[2]
Instrument garnish RH
[3]
[2]
[2]
[3]
Console finisher assembly
[4]
[3]
[4]
Instrument side panel LH
[5]
[5]
Instrument side panel RH
[6]
[6]
Center console assembly
[7]
[7]
A/T shift selector assembly
[8]
Preset switch assembly
[9]
[3]
[4]
Set-up switch assembly
[10]
[5]
Cluster lid C (lower)
[11]
[6]
AV control unit
[12]
[7]
A/C auto amp.
[13]
Instrument side finisher LH
[14]
Body side welt LH
[15]
Front pillar garnish LH
[16]
Instrument lower panel (driver)
[17]
Driver air bag module
[18]
[1]
[4]
Steering wheel
[19]
[2]
[5]
Steering column front lower cover
[20]
[3]
[6]
Steering column cover
[21]
[4]
[7]
Combination switch
[22]
[5]
[8]
Cluster lid A
[23]
[6]
[9]
Power socket
[24]
Instrument pad A
[25]
[10]
Display unit
[26]
[11]
IP-14
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
[ ]: Number indicates step in removal procedure.
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or
more.
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1.
Remove rear console assembly.
1.
Lift up rear side of rear console assembly (1), and then dis-
engage pawls and metal clips.
2.
Disconnect harness connector on the back.
2.
Remove instrument garnish LH.
1.
Insert remover tool (A), wrapped in a shop cloth, into clear-
ance between lower side of instrument garnish LH (1) and
cluster lid C (lower) (2).
2.
Pull back instrument garnish LH, and then disengage pawls.
3.
Remove instrument garnish RH.
Instrument pad B
[27]
Front defroster grille LH
[28]
Center speaker grille
[29]
Center speaker
[30]
Front defroster grille RH
[31]
Instrument side finisher RH
[32]
Body side welt RH
[33]
Front pillar garnish RH
[34]
Glove box lid
[35]
Instrument lower cover RH
[36]
Instrument lower panel (assist)
[37]
Instrument pad C
[38]
Instrument panel assembly
[39]
PARTS
INSTRUMENT
PANEL
ASSEMBLY
COMBINATION
METER
DISPLAY UNIT
AV control unit
CENTER
CONSOLE
ASSEMBLY
: Pawl
: Metal clip
NNJIA0052ZZ
: Pawl
JMJIA2177ZZ
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
1.
Insert remover tool (A), wrapped in a shop cloth, into clear-
ance between lower side of instrument garnish RH (1) and
cluster lid C (lower) (2).
2.
Pull back instrument garnish RH, and then disengage
pawls.
4.
Remove console finisher.
1.
Open console lid.
2.
Insert remover tool (A) between console finisher (1) and
center console, lift up console finisher, and then disengage
clips and pawls.
5.
Remove instrument side panel LH.
Pull instrument side panel LH (1) from vehicle front in lateral
direction, then disengage clips, pawl and metal clips.
CAUTION:
Be careful of pawl when disengaging clips.
6.
Remove instrument side panel RH.
Pull instrument side panel RH (1) from vehicle front in lateral
direction, then disengage clips, pawl and metal clips.
CAUTION:
Be careful of pawl when disengaging clips.
7.
Remove center console assembly.
: Pawl
JMJIA2176ZZ
: Clip
: Pawl
JMJIA2178ZZ
: Clip
: Pawl
: Metal clip
JMJIA2179ZZ
: Clip
: Pawl
: Metal clip
JMJIA2180ZZ
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
1.
Remove fixing screws (A) from front end of center console (1).
2.
Remove mounting nuts (B) from rear end of center console.
3.
Lift up center console, and then remove harness clamps (C) and disconnect harness connector from
back side.
8.
Remove A/T shift selector assembly. Refer to
TM-16, "Removal and Installation"
9.
Remove preset switch assembly. Refer to
AV-87, "Removal and Installation"
.
1.
Remove instrument garnish (upper) using remover tool.
2.
Remove fixing screw (A) of preset switch assembly (1).
3.
Pull back preset switch assembly, and then disengage
pawls.
4.
Disconnect harness connectors on the back.
10. Remove set-up switch assembly.
1.
Remove fixing screws (A) of set-up switch assembly (1).
2.
Pull back set-up switch assembly, and then disengage
pawls.
3.
Disconnect harness connector on the back.
11. Remove cluster lid C (lower).
1.
Remove fixing screws (A) of cluster lid C (lower) (1).
2.
Pull back cluster lid C (lower).
3.
Disconnect harness connector of back side and harness
connector of inside key antenna.
12. Remove AV control unit. Refer to
AV-77, "Removal and Installation"
13. Remove A/C auto amp.
: Pawl
NNJIA0058ZZ
JMJIA2181ZZ
: Pawl
JMJIA2182ZZ
JMJIA2183ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст