Nissan GT-R. Manual — part 209
PRECAUTIONS
MIR-13
< PRECAUTION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
4.
Perform the necessary repair operation.
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the ignition switch from ACC position to ON position, then to LOCK position. (The steering wheel will lock
when the ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT.
Precaution for Battery Service
INFOID:0000000009159981
Before disconnecting the battery, lower both the driver and passenger windows. This will prevent any interfer-
ence between the window edge and the vehicle when the door is opened/closed. During normal operation, the
window slightly raises and lowers automatically to prevent any window to vehicle interference. The automatic
window function will not work with the battery disconnected.
MIR-14
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009159982
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000009159983
Tool number
(Kent-Moore No.)
Tool name
Description
(J-39570)
Chassis ear
Locates the noise
(J-43980)
NISSAN Squeak and Rat-
tle Kit
Repairs the cause of noise
SIIA0993E
SIIA0994E
Tool name
Description
Engine ear
Locates the noise
Remover tool
Removes the clips, pawls, and metal clips
Power tool
SIIA0995E
JMKIA3050ZZ
PIIB1407E
INSIDE MIRROR
MIR-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000009159984
Removal and Installation
INFOID:0000000009159985
REMOVAL
1.
Remove the inside mirror cover.
2.
Remove the TORX bolt.
3.
Disconnect harness connector from inside mirror.
4.
Slide the inside mirror upward to remove.
INSTALLATION
Install in the reverse order of removal.
1.
Windshield glass
2.
Mirror base
3.
Harness connector
4.
TORX bolt
5.
Inside mirror
6.
Inside mirror cover
for symbols in the figure.
JMLIA0177GB
MIR-16
< REMOVAL AND INSTALLATION >
OUTSIDE MIRROR
OUTSIDE MIRROR
DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Exploded View
INFOID:0000000009159986
REMOVAL
DISASSEMBLY
DOOR MIRROR ASSEMBLY : Removal and Installation
INFOID:0000000009159987
REMOVAL
1.
Remove door finisher. Refer to
INT-12, "Removal and Installation"
.
2.
Remove door inner west reinforcement. Refer to
DLK-137, "DOOR ASSEMBLY : Exploded View"
3.
Disconnect door mirror harness connector.
1.
Door mirror assembly
JMLIA0203ZZ
1.
Mirror assembly
2.
Glass mirror
: Pawl
JMLIA0201ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст