Nissan Cube. Manual — part 668
INSIDE MIRROR
MIR-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000009946009
Removal and Installation
INFOID:0000000009946010
CAUTION:
Never reuse the inside mirror disassembled from mirror base.
REMOVAL
1.
Remove inside mirror cover.
2.
Disconnect harness connector from inside mirror.
3.
Remove inside mirror mounting bolt, and remove inside mirror.
4.
Remove mirror base mounting bolts, and remove mirror base.
INSTALLATION
Install in the reverse order of removal.
1.
Roof panel
2.
Windshield glass
3.
Mirror base
4.
Inside mirror
5.
Inside mirror cover
: Pawl
: Always replace after every disassembly.
JMLIA0326ZZ
MIR-16
< REMOVAL AND INSTALLATION >
OUTSIDE MIRROR
OUTSIDE MIRROR
DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Exploded View
INFOID:0000000009946011
DOOR MIRROR ASSEMBLY : Removal and Installation
INFOID:0000000009946012
REMOVAL
1.
Remove door mirror corner cover.
2.
Remove door finisher. Refer to
INT-12, "Removal and Installation"
.
3.
Disconnect door mirror harness connector.
4.
Remove door mirror mounting nuts, and remove door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
GLASS MIRROR
1.
Door mirror cover
2.
Door mirror corner cover
3.
Glass mirror
4.
Door mirror assembly
: Clip
: Pawl
JMLIA0328ZZ
OUTSIDE MIRROR
MIR-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
GLASS MIRROR : Exploded View
INFOID:0000000009946013
GLASS MIRROR : Disassembly and Assembly
INFOID:0000000009946014
DISASSEMBLY
1.
Place the glass mirror upward.
2.
Put a strip of protective tape (B) on housing assembly.
3.
Insert a small flat-bladed screwdriver (A) into the recess at lower side between glass mirror (1) and actua-
tor (2), and push up pawls to remove glass mirror lower side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work
easier.
4.
Insert a small flat-bladed screwdriver at LH/RH side between glass mirror and actuator, and push up
pawls to remove glass mirror LH/RH side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work
easier.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
After installation, visually check that pawls are securely engaged.
DOOR MIRROR COVER
1.
Door mirror cover
2.
Door mirror corner cover
3.
Glass mirror
4.
Door mirror assembly
: Clip
: Pawl
JMLIA0328ZZ
JMLIA0327ZZ
MIR-18
< REMOVAL AND INSTALLATION >
OUTSIDE MIRROR
DOOR MIRROR COVER : Exploded View
INFOID:0000000009946015
DOOR MIRROR COVER : Disassembly and Assembly
INFOID:0000000009946016
DISASSEMBLY
1.
Remove the glass mirror. Refer to
MIR-17, "GLASS MIRROR : Disassembly and Assembly"
2.
Remove the pawls, and disassemble the door mirror cover from the mirror assembly.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
After installation, visually check that pawls are securely engaged.
1.
Door mirror cover
2.
Door mirror corner cover
3.
Glass mirror
4.
Door mirror assembly
: Clip
: Pawl
JMLIA0328ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст