Nissan Cube. Manual — part 1074
WIPER AND WASHER SYSTEM SYMPTOMS
WW-133
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
SYMPTOM DIAGNOSIS
WIPER AND WASHER SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000009945866
CAUTION:
Perform the self-diagnosis with CONSULT before performing the diagnosis by symptom. Perform the
diagnosis by DTC if DTC is detected.
Symptom
Probable malfunction location
Inspection item
Front wiper does not
operate.
HI only
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (HI) circuit
Refer to
.
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
LO and INT
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (LO) circuit
Refer to
.
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
INT only
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
HI, LO and INT
SYMPTOM DIAGNOSIS
“FRONT WIPER DOES NOT OPERATE”
Refer to
.
WW-134
< SYMPTOM DIAGNOSIS >
WIPER AND WASHER SYSTEM SYMPTOMS
Front wiper does not
stop.
HI only
• Combination switch
• BCM
Combination switch
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
IPDM E/R
—
LO only
• Combination switch
• BCM
Combination switch
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
IPDM E/R
—
INT only
• Combination switch
• BCM
Combination switch
Refer to
Front wiper request signal
• BCM
• IPDM E/R
IPDM E/R DATA MONITOR
“FR WIP REQ”
Front wiper does not
operate normally.
Intermittent adjustment
cannot be performed.
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
BCM
—
Intermittent control
linked with vehicle
speed cannot be per-
formed.
Check the vehicle speed detection wiper setting.
Refer to
WW-14, "WIPER : CONSULT Function (BCM - WIPER)"
Wiper is not linked to
the washer operation.
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
BCM
—
Does not return to stop
position. [Repeatedly
operates for 10 sec-
onds and then stops
for 20 seconds. After
that, it stops the opera-
tion. (Fail-safe)]
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper stop position sig-
nal circuit
Refer to
.
Rear wiper does not
operate.
ON only
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
INT only
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
ON and INT
• Combination switch
• Harness between combination switch and BCM
• BCM
Combination switch
Refer to
• BCM
• Harness between rear wiper motor and BCM
• Harness between rear wiper motor and ground
• Rear wiper motor
Rear wiper motor circuit
Refer to
.
Symptom
Probable malfunction location
Inspection item
WIPER AND WASHER SYSTEM SYMPTOMS
WW-135
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Rear wiper does not
stop.
ON only
• Combination switch
• BCM
Combination switch
Refer to
INT only
• Combination switch
• BCM
Combination switch
Refer to
Rear wiper does not
operate normally.
Wiper is not linked to
the washer operation.
• Combination switch
• Harness between rear wiper motor and BCM
• BCM
Combination switch
Refer to
BCM
—
Rear wiper does not
return to the stop posi-
tion. [Stops after a five-
second operation.
(Fail-safe)]
• BCM
• Harness between rear wiper motor and BCM
• Rear wiper motor
Rear wiper stop position sig-
nal circuit
Refer to
.
Symptom
Probable malfunction location
Inspection item
WW-136
< SYMPTOM DIAGNOSIS >
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000009945867
FRONT WIPER MOTOR PROTECTION FUNCTION
• IPDM E/R may stop the front wiper to protect the front wiper motor if any obstruction (operation resistance)
such as a large amount of snow is detected during the front wiper operation.
• At that time turn OFF the front wiper and remove the foreign object. Then wait for approximately 20 seconds
or more and reactivate the front wiper. The wiper will operate normally.
REAR WIPER MOTOR PROTECTION FUNCTION
• BCM may stop rear wiper to protect the rear wiper motor when the rear wiper is stopped for 5 seconds or
more due to a snowfall.
• Rear wiper operates normally one minute after the obstacles are removed with rear wiper OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст