Nissan Cube. Manual — part 671
MWI-8
< SYSTEM DESCRIPTION >
METER SYSTEM
METER SYSTEM : Component Parts Location
INFOID:0000000009945648
JSNIA6649ZZ
1.
Fuel level sensor unit
2.
ABS actuator and electric unit (con-
trol unit)
Refer to
3.
Ambient sensor
Refer to
.
4.
5.
A/C auto amp. (auto A/C models)
Refer to
6.
IPDM E/R
• Refer to
(with I-KEY).
(without I-KEY).
7.
8.
TCM
Refer to
9.
BCM
Refer to
(With intelligent key sys-
tem) or
(Without intelligent key sys-
tem).
10. Combination meter
A.
Under of right side rear seat
MWI
METER SYSTEM
MWI-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER SYSTEM : Component Description
INFOID:0000000009945649
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000009945650
SPEEDOMETER : System Description
INFOID:0000000009945651
• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel
sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication.
• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-
nal received via CAN communication.
Unit
Description
Combination meter
Controls the following with the signals received from each unit via CAN communication and the
signals from switches and sensors.
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Warning lamps
• Indicator lamps
• Information display
• Meter illumination control
• Shift position indicator
• Odo/trip meter
• Meter effect function
IPDM E/R
IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure
switch signal to the combination meter via BCM via CAN communication.
Fuel level sensor unit
.
Oil pressure switch
.
ECM
Transmits the following signals to the combination meter via CAN communication.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
• Engine status signal
• Fuel filler cap warning display signal
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
BCM
Transmits the following signals to the combination meter via CAN communication.
• Oil pressure switch signal
• Position light request signal
• Low tire pressure warning lamp signal
TCM
Transmits the shift position signal to the combination meter via CAN communication.
Ambient sensor
Transmits the ambient sensor signal to the combination meter.
A/C auto amp.
Transmits the A/C auto amp. connection recognition signal to the combination meter.
JSNIA0289GB
MWI-10
< SYSTEM DESCRIPTION >
METER SYSTEM
SPEEDOMETER : Component Parts Location
INFOID:0000000010235261
SPEEDOMETER : Component Description
INFOID:0000000009945653
TACHOMETER
JSNIA6649ZZ
1.
Fuel level sensor unit
2.
ABS actuator and electric unit (con-
trol unit)
Refer to
3.
Ambient sensor
Refer to
.
4.
5.
A/C auto amp. (auto A/C models)
Refer to
6.
IPDM E/R
• Refer to
(with I-KEY).
(without I-KEY).
7.
8.
TCM
Refer to
9.
BCM
Refer to
(With intelligent key sys-
tem) or
(Without intelligent key sys-
tem).
10. Combination meter
A.
Under of right side rear seat
Unit
Description
Combination meter
Indicates the vehicle speed to the speedometer according to the vehicle speed signal received from
ABS actuator and electric unit (control unit) via CAN communication.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
MWI
METER SYSTEM
MWI-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TACHOMETER : System Diagram
INFOID:0000000009945654
TACHOMETER : System Description
INFOID:0000000009945655
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the combination meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
TACHOMETER : Component Parts Location
INFOID:0000000010235263
JSNIA0290GB
JSNIA6649ZZ
1.
Fuel level sensor unit
2.
ABS actuator and electric unit (con-
trol unit)
Refer to
3.
Ambient sensor
Refer to
.
4.
Oil pressure switch
Refer to
5.
A/C auto amp. (auto A/C models)
Refer to
6.
IPDM E/R
• Refer to
(with I-KEY).
• Refer to
(without I-KEY).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст