Nissan Cube. Manual — part 977
TM-164
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F08B]
OVERDRIVE CONTROL SWITCH
Component Inspection (Overdrive Control Switch)
INFOID:0000000009949044
1.
CHECK OVERDRIVE CONTROL SWITCH
Check continuity between CVT shift selector vehicle connector terminals.
With intelligent key system
Without intelligent key system
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace damaged parts.
CVT shift selector connector
Condition
Continuity
Connector
Terminal
M58
1
2
Press and hold overdrive control switch
Existed
Other conditions
Not existed
CVT shift selector connector
Condition
Continuity
Connector
Terminal
M57
1
2
Press and hold overdrive control switch
Existed
Other conditions
Not existed
SHIFT POSITION INDICATOR CIRCUIT
TM-165
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F08B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT POSITION INDICATOR CIRCUIT
Description
INFOID:0000000009949045
TCM transmits shift position signal to combination meter via CAN communication. The actual shift position is
displayed on combination meter according to the signal.
Component Function Check
INFOID:0000000009949046
1.
CHECK SHIFT POSITION INDICATOR
1.
Start the engine.
2.
Shift selector lever.
3.
Check that the selector lever position and shift position indicator on combination meter are equivalent.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000009949047
1.
CHECK TCM INPUT AND OUTPUT SIGNALS
With CONSULT
1.
Start the engine.
2.
Select “Data Monitor” in “TRANSMISSION”.
3.
Select “RANGE”.
4.
Shift selector lever.
5.
Check that selector lever position, “RANGE” on CONSULT screen, and shift position indicator display on
combination meter are identical.
Is the inspection result normal?
YES
>> INSPECTION END
NO-1 (“RANGE” is changed but is not displayed on shift position indicator.)>>Select
“Self
Diagnostic
Results” in “TRANSMISSION”.
NO-2 (“RANGE” differs from shift position indicator.)>>Select “Self Diagnostic Results” in “TRANSMISSION”.
NO-3 (Specific“RANGE” is not displayed on shift position
indicator.)>>Select “Self Diagnostic Results” in
“METER/M&A”.
TM-166
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F08B]
SHIFT LOCK SYSTEM
SHIFT LOCK SYSTEM
Description
INFOID:0000000009949048
Component
Function
Shift lock solenoid
It operates according to the signal from the stop lamp switch and moves the lock
lever.
Lock lever
• It is rotated according to shift lock solenoid activation and shift lock is released.
• If shift lock solenoid does not activate, lock lever can be rotated when shift lock
release button is pressed and shift lock is released.
Detent plate
It links with the selector button and restricts the selector lever movement.
Park position switch
It detects that the selector lever is in “P” position.
Shift lock release button
It moves the lock lever forcibly.
SHIFT LOCK SYSTEM
TM-167
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F08B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Wiring Diagram - SHIFT LOCK SYSTEM -
INFOID:0000000009949049
JCDWM0583GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст