Nissan Cube. Manual — part 5
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-13
< SYSTEM DESCRIPTION >
[AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
6.
Press the “DISP TEXT” switch again to display the “Hard” (audio
hardware version).
7.
Press the “DISP TEXT” switch again to display the “CD Mech”
(CD mechanism version).
8.
Press the “DISP TEXT” switch again to display the “EEP” (audio
unit EEPROM version).
9.
Press the “DISP TEXT” switch again to display the “SDARS”
(satellite radio version).
JPNIA1653ZZ
JPNIA1654ZZ
JPNIA1655ZZ
JPNIA1656ZZ
AV-14
< SYSTEM DESCRIPTION >
[AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AUDIO UNIT)
10. Press the “DISP TEXT” switch again to display the “CHG” (audio
CD changer version). If audio CD changer is not connected,
“FFFFFF” is displayed.
11. Press the “DISP TEXT” switch again to display the “iPodS” (iPod
software version). “FFFFFF” is displayed when communication
signals between the audio unit and iPod adapter include a mal-
function.
12. Press the “DISP TEXT” switch again to display the “iPodH” (iPod
hardware version). “FFFFFF” is displayed when communication
signals between the audio unit and iPod adapter include a mal-
function.
Finishing Self-diagnosis Mode
Self-diagnosis Mode is canceled when turning ignition switch OFF.
JPNIA1657ZZ
JPNIA1658ZZ
JPNIA1659ZZ
AV
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
AV-15
< SYSTEM DESCRIPTION >
[AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
Diagnosis Description
INFOID:0000000009949542
HANDS-FREE PHONE SYSTEM ON BOARD DIAGNOSIS
During on board diagnosis the diagnosis function of TEL adapter unit starts with the operation of the steering
switch and performs the diagnosis when ignition switch ACC.
ON BOARD DIAGNOSIS ITEM
The on board diagnosis has 3 modes: the self-diagnosis mode that performs the trouble diagnosis, the
speaker adaptation data deleting mode and the hands-free phone system initialization mode.
CAUTION:
• Perform the diagnosis with the vehicle stopped.
• Perform STEP2 if necessary.
SELF-DIAGNOSIS RESULTS
Self-diagnosis mode reads out the self-diagnosis results and indicates DTC on the audio screen.
NOTE:
• Error count is read out simultaneously when reading out the DTC name.
• The errors are read out continuously when some errors occur at the same time. The DTC displays are com-
bined and displayed. For example, DTC 01100 is displayed when DTC 01000 and DTC 00100 are indicated
at the same time.
Self-diagnosis results
The Details of Error Count
The error count guides “0” when the error occurs. The next time it counts up “1” if it is normal with the ignition
switch ON. It continues the count up unless the initialization of hands-free phone system is performed.
STEP
MODE
Description
STEP 1
Self-diagnosis
The self-diagnosis mode performs the microphone test and
the diagnosis of TEL adapter unit, TEL antenna and steering
switch, and then reads out the results with the sound and in-
dicates them on the audio screen.
STEP 2
Hands-free phone system initialization
Hands-free phone system initialization mode can perform
the initialization of hands-free phone system.
Speaker adaptation data deleting
The speaker adaptation data deleting mode can delete the
speaker adaptation data.
DTC
(Audio screen)
Failure massage
Possible causes
DTC 10000
Internal failure
TEL adapter unit
DTC 01000
Bluetooth antenna open
TEL antenna
DTC 00100
Bluetooth antenna shorted
DTC 00010
Button ladder A is stuck
Steering switch
DTC 00001
Button ladder B is stuck
DTC 00000
There are no failure records to report
—
AV-16
< SYSTEM DESCRIPTION >
[AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)
FLOW CHART OF TROUBLE DIAGNOSIS
JSNIA2498GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст