Nissan Cube. Manual — part 663
MA-26
< PERIODIC MAINTENANCE >
CHASSIS MAINTENANCE
• Check for leakage.
BRAKE PAD
• Check for wear or damage.
DISC BRAKE : Front Disc Brake
INFOID:0000000009949445
Unit: mm (in)
DRUM BRAKE
DRUM BRAKE : Inspection
INFOID:0000000009949446
DRUM
Check condition, wear, and damage.
WHEEL CYLINDER
• Check for leakage.
LINING
SMA922A
BRA0010D
Item
Limit
Brake pad
Wear thickness
2.0 (0.079)
Disc rotor
Wear thickness
22.0 (0.866)
Thickness variation (measured at 8 positions)
0.015 (0.0006)
Runout (with it attached to the vehicle)
0.035 (0.0014)
SFIA0657J
CHASSIS MAINTENANCE
MA-27
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
• Check for lining thickness.
DRUM BRAKE : Rear Drum Brake
INFOID:0000000009949447
Unit: mm (in)
STEERING GEAR AND LINKAGE
STEERING GEAR AND LINKAGE : Inspection
INFOID:0000000009949448
STEERING GEAR
• Check gear housing and boots for looseness, damage and grease
leakage.
• Check connection with steering column for looseness.
STEERING LINKAGE
Check ball joint, dust cover and other component parts for looseness, wear, damage and grease leakage.
AXLE AND SUSPENSION PARTS
AXLE AND SUSPENSION PARTS : Inspection
INFOID:0000000009949449
Check front and rear axle and suspension parts for excessive play,
cracks, wear or other damage.
• Shake each wheel to check for excessive play.
• Check wheel bearings for smooth operation.
• Check axle and suspension nuts and bolts for looseness.
• Check strut (shock absorber) for oil leakage or other damage.
• Check suspension ball joint for grease leakage and ball joint dust
cover for cracks or other damage.
SBR021A
Item
Limit
Brake lining
Wear thickness
1.5 (0.059)
Brake drum
Wear inner diameter
230.0 (9.06)
JPPIA0013GB
SMA525A
MA-28
< PERIODIC MAINTENANCE >
CHASSIS MAINTENANCE
DRIVE SHAFT
DRIVE SHAFT : Inspection
INFOID:0000000009949450
• Check boot and drive shaft for cracks, wear, damage and grease
leakage.
JPPIA0011ZZ
SFA108A
BODY MAINTENANCE
MA-29
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
BODY MAINTENANCE
LOCKS, HINGES AND HOOD LATCH
LOCKS, HINGES AND HOOD LATCH : Lubricating
INFOID:0000000009949451
For hood and hood lock illustration.
• Hood: Refer to
DLK-181, "HOOD ASSEMBLY : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
DLK-334, "HOOD ASSEMBLY : Exploded View"
. (WITHOUT INTELLIGENT KEY SYSTEM)
• Hood lock control: Refer to
. (WITH INTELLIGENT KEY SYSTEM)
• Hood lock control: Refer to
. (WITHOUT INTELLIGENT KEY SYSTEM)
For door and door lock illustration.
• Front door: Refer to
DLK-190, "DOOR ASSEMBLY : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
• Front door: Refer to
DLK-343, "DOOR ASSEMBLY : Exploded View"
. (WITHOUT INTELLIGENT KEY SYS-
TEM)
• Front door lock: Refer to
DLK-212, "DOOR LOCK : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
• Front door lock: Refer to
DLK-365, "DOOR LOCK : Exploded View"
. (WITHOUT INTELLIGENT KEY SYS-
TEM)
• Rear door: Refer to
DLK-196, "DOOR ASSEMBLY : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
• Rear door: Refer to
DLK-349, "DOOR ASSEMBLY : Exploded View"
. (WITHOUT INTELLIGENT KEY SYS-
TEM)
• Rear door lock: Refer to
DLK-216, "DOOR LOCK : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
• Rear door lock: Refer to
DLK-369, "DOOR LOCK : Exploded View"
. (WITHOUT INTELLIGENT KEY SYS-
TEM)
For back door and back door lock illustration.
• Back door: Refer to
DLK-201, "BACK DOOR ASSEMBLY : Exploded View"
. (WITH INTELLIGENT KEY
SYSTEM)
• Back door: Refer to
DLK-354, "BACK DOOR ASSEMBLY : Exploded View"
. (WITHOUT INTELLIGENT KEY
SYSTEM)
• Back door lock: Refer to
DLK-220, "DOOR LOCK : Exploded View"
. (WITH INTELLIGENT KEY SYSTEM)
• Back door lock: Refer to
DLK-373, "DOOR LOCK : Exploded View"
. (WITHOUT INTELLIGENT KEY SYS-
TEM)
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS : Inspection
INFOID:0000000009949452
For front seat belt illustration. Refer to
SB-6, "SEAT BELT RETRACTOR : Exploded View"
For rear seat belt illustration. Refer to
SB-11, "SEAT BELT RETRACTOR : Exploded View"
CAUTION:
• After any collision, inspect all seat belt assemblies, including retractors and other attached hard-
wares (I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt assemblies in use
during a collision, unless not damaged and properly operating after minor collision.
Also inspect seat belt assemblies not in use during a collision, and replace if damaged or improperly
operating.
Seat belt pre-tensioner should be replaced even if the seat belts are not in use during a frontal colli-
sion where the driver and passenger air bags are deployed.
• If any component of seat belt assembly is questionable, do not repair.
Replace as seat belt assembly.
• If webbing is cut, frayed, or damaged, replace belt assembly.
• Never oil tongue and buckle.
• Use a genuine NISSAN seat belt assembly.
For details, refer to
SB-4, "SEAT BELT RETRACTOR : Inspection"
in SB section.
• Check anchors for loose mounting
• Check belts for damage
• Check retractor for smooth operation
• Check function of buckles and tongues when buckled and released
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст