Nissan Cube. Manual — part 750
PG
PREPARATION
PG-81
< PREPARATION >
[POWER SUPPLY & GROUND CIRCUIT]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009945606
Tool number
(Kent-Moore No.)
Tool name
Description
—
(—) Model GR8-1200 NI
Multitasking battery and electrical di-
agnostic station
Tests batteries, starting and charging sys-
tems and charges batteries.
For operating instructions, refer to diagnostic
station instruction manual.
—
(—) Model EXP-800 NI
Battery and electrical diagnostic ana-
lyzer
Tests batteries and charging systems.
For operating instructions, refer to diagnostic
analyzer instruction manual.
AWIIA1239ZZ
JSMIA0806ZZ
PG-82
< REMOVAL AND INSTALLATION >
[POWER SUPPLY & GROUND CIRCUIT]
BATTERY
REMOVAL AND INSTALLATION
BATTERY
Exploded View
INFOID:0000000009945607
Removal and Installation
INFOID:0000000009945608
REMOVAL
1.
Remove resonator.
2.
Remove cover of battery positive terminal.
3.
Loosen battery terminal nuts (1), and disconnect both battery
cables from battery terminals.
CAUTION:
When disconnecting, disconnect the battery cable from the
negative terminal first.
4.
Remove battery fix frame mounting nuts (2) and battery fix
frame (3).
5.
Remove battery.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When connecting, connect the battery cable to the positive terminal first.
Reset electronic systems as necessary. Refer to
GI-53, "ADDITIONAL SERVICE WHEN REMOVING BAT-
TERY NEGATIVE TERMINAL : Required Procedure After Battery Disconnection"
1
: Battery fix frame
for symbols in the figure.
JPMIA1399GB
JPMIA1470ZZ
PG
BATTERY TERMINAL WITH FUSIBLE LINK
PG-83
< REMOVAL AND INSTALLATION >
[POWER SUPPLY & GROUND CIRCUIT]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BATTERY TERMINAL WITH FUSIBLE LINK
Exploded View
INFOID:0000000009945609
Removal and Installation
INFOID:0000000009945610
REMOVAL
1.
Disconnect the battery cable from the negative terminal.
2.
Remove cover of battery positive terminal.
3.
Remove harness mounting nut (1) and fusible link holder mount-
ing nut (2).
4.
Disconnect harness connector (3) and remove battery terminal
with fusible link (4).
INSTALLATION
Install in the reverse order of removal.
1
: Battery terminal with fusible link
2
: Harness connector
for symbols in the figure.
JPMIA1513GB
JPMIA1471ZZ
PG-84
< SERVICE DATA AND SPECIFICATIONS (SDS)
[POWER SUPPLY & GROUND CIRCUIT]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Battery
INFOID:0000000009945611
Type
55D23L
20 hour rate capacity
[V – Ah]
12 – 60
Cold cranking current (For reference value)
[A]
356
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст