Nissan Cube. Manual — part 870
SR-26
< REMOVAL AND INSTALLATION >
DIAGNOSIS SENSOR UNIT
DIAGNOSIS SENSOR UNIT
Exploded View
INFOID:0000000009946914
Removal and Installation
INFOID:0000000009946915
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Before disconnecting the air bag sensor unit harness connector, be sure to disconnect the each har-
ness connector of the air bag module and pre-tensioner seat belt to prevent air bag deployment by
static electricity and pre-tensioner seat belt operation.
• Never use the air tools or electric tools for servicing.
• When replacing the air bag diagnosis sensor unit, always check with the parts department for the lat-
est parts information. Installing an incorrect air bag diagnosis sensor unit may or may not cause the
air bag warning lamp to illuminate and may cause incorrect deployment of the supplemental air bags
and seat belt pre-tensioners in a collision resulting in serious personal injury or death.
REMOVAL
1.
Always check the air bag diagnosis sensor unit ECU discriminated number (identification number) using
CONSULT.
2.
Disconnect the each connector of all air bag modules and pre-tensioner seat belts.
3.
Remove the center console assembly. Refer to
IP-23, "Removal and Installation"
4.
Disconnect the diagnosis sensor unit harness connectors.
1.
Center console assembly
2.
Diagnosis sensor unit
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
JMHIA1091GB
DIAGNOSIS SENSOR UNIT
SR-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
5.
Remove the diagnosis sensor unit mounting bolts, and then remove the diagnosis sensor unit.
CAUTION:
• Never impact the diagnosis sensor unit.
• Replace the diagnosis sensor unit if it has been dropped or
sustained an impact.
• Replace the diagnosis sensor unit of deployed driver air bag module, deployed passenger air bag
module, deployed side air bag module, deployed curtain air bag module, and deployed seat belt pre-
tensioner.
INSTALLATION
Install air bag diagnosis sensor unit in the reverse order of removal.
CAUTION:
• Never use the old bolts after removal, replace with the new bolts.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
• After replacing the air bag diagnosis sensor unit, confirm using CONSULT that the ECU discrimi-
nated number (identification number) of the new replacement air bag diagnosis sensor unit matches
the ECU discriminated number (identification number) of the replaced (old) air bag diagnosis sensor
unit.
NOTE:
If the ECU discriminated number of the new replacement air bag diagnosis sensor unit differs from the ECU
discriminated number of the replaced air bag diagnosis sensor unit, reconfirm the parts information and verify
that the correct air bag diagnosis sensor unit was installed.
JMHIA0009ZZ
SR-28
< REMOVAL AND INSTALLATION >
SEAT BELT PRE-TENSIONER
SEAT BELT PRE-TENSIONER
Exploded View
INFOID:0000000009946916
SB-6, "SEAT BELT RETRACTOR : Exploded View"
.
Removal and Installation
INFOID:0000000009946917
For removal and installation procedures, refer to
SB-7, "SEAT BELT RETRACTOR : Removal and Installa-
.
OCCUPANT DETECTION SYSTEM CONTROL UNIT
SR-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
OCCUPANT DETECTION SYSTEM CONTROL UNIT
Exploded View
INFOID:0000000009946918
.
Removal and Installation
INFOID:0000000009946919
REMOVAL
1.
Remove passenger seat assembly. Refer to
SE-14, "Removal and Installation"
2.
Remove occupant detection system control unit (1) fixing screws
(A).
3.
Disconnect occupant detection system control unit harness con-
nector.
4.
Remove occupant detection system control unit from seat cush-
ion flame (2).
INSTALLATION
Install in the reverse order of removal.
JMHIA1689ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст