Nissan Juke F15. Manual — part 1292
TM-358
< PRECAUTION >
[CVT: RE0F10D]
PRECAUTIONS
• Rotate bayonet ring (1) counterclockwise. Pull out CVT unit har-
ness connector (2) upward and remove it.
INSTALLATION
1. Align marking (A) on CVT unit harness connector terminal with
marking (B) on bayonet ring. Insert CVT unit harness connector.
2. Rotate bayonet ring clockwise.
3. Rotate bayonet ring clockwise until marking (A) on CVT unit har-
ness connector terminal body is aligned with the slit (B) on bayo-
net ring as shown in the figure (correctly fitting condition).
CAUTION:
• Securely align marking (A) on CVT unit harness connec-
tor terminal body with bayonet ring slit (B). Then, be care-
ful not to make a half fit condition as shown in the figure.
• Never mistake the slit of bayonet ring for other dent por-
tion.
SCIA6685J
JPDIA0294ZZ
JPDIA0295ZZ
JPDIA0296ZZ
PREPARATION
TM-359
< PREPARATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000012201067
The actual shape of the tools may differ from those illustrated here.
*: The O-ring as a unit part is set as a SST.
Commercial Service Tools
INFOID:0000000012201068
Tool number
(TechMate No.)
Tool name
Description
1.
KV311039S0
(
—
)
Charging pipe set
2.
KV31103920*
(
—
)
O-ring
CVT fluid changing and adjustment
KV38107900
(
—
)
Protector
a: 32 mm (1.26 in) dia.
Installing drive shaft
JSDIA1844ZZ
PDIA1183J
Tool number
Tool name
Description
Power tool
Loosening nuts and bolts
Oil seal remover
Removing each oil seal
Drift
a: 53 mm (2.09 in) dia.
b: 50 mm (1.97 in) dia.
Installing differential side oil seal [tran-
saxle case side, and converter housing
side (2WD models)]
PBIC0190E
JSDIA4998ZZ
NT115
TM-360
< PREPARATION >
[CVT: RE0F10D]
PREPARATION
Drift
a: 60 mm (2.36 in) dia.
Installing differential side oil seal [con-
verter housing side (AWD models)]
Drift
a: 65 mm (2.56 in) dia.
b: 60 mm (2.36 in) dia.
Installing converter housing oil seal
Tool number
Tool name
Description
SCIA5338E
NT115
COMPONENT PARTS
TM-361
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
CVT CONTROL SYSTEM
CVT CONTROL SYSTEM : Component Parts Location
INFOID:0000000012201069
JSDIA7184GB
1.
Multi display unit (MDU)
Refer to
2.
ABS actuator and electric unit (control
unit)
Refer to
.
3.
ECM
Refer to
SYSTEM :
Component Parts Location"
.
4.
IPDM E/R
Refer to
5.
BCM
Refer to
SYSTEM : Component Parts Loca-
tion"
6.
Combination meter
7.
Manual mode indicator
(On the combination meter)
8.
Shift position indicator
(On the combination meter)
9.
CVT indicator
(On the combination meter)
10. Paddle shifter (shift-down switch)
11. Paddle shifter (shift-up switch)
12. Transmission range sensor
13. Input speed sensor
14. Control valve
15. CVT unit connector
16. Primary speed sensor
17. Output speed sensor
18. TCM
19. Manual mode switch
A.
Transaxle assembly
B.
Engine room
C.
CVT shift selector assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст