Nissan Juke F15. Manual — part 207
DLK-8
< PREPARATION >
[WITH INTELLIGENT KEY SYSTEM]
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000012196576
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000012196577
Tool number
(Kent-Moore No.)
Tool name
Description
(J-39570)
Chassis ear
Locates the noise
(J-50397)
NISSAN Squeak and Rat-
tle Kit
Repairs the cause of noise
SIIA0993E
SIIA0994E
Tool name
Description
Engine ear
Locates the noise
Remover tool
Removes clips, pawls and metal clips
Power tool
Loosening bolts, nuts and screws
SIIA0995E
JMKIA3050ZZ
PIIB1407E
COMPONENT PARTS
DLK-9
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000012196578
JMKIB5827ZZ
DLK-10
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
COMPONENT PARTS
Component Description
INFOID:0000000012196579
1.
Intelligent Key warning buzzer
2.
Remote keyless entry receiver
3.
Inside key antenna (instrument cen-
ter)
4.
TCM
Refer to
SYSTEM : Component Parts Location"
5.
Push-button ignition switch
6.
Combination meter
7.
BCM
Refer to
SYSTEM : Component Parts Location"
8.
Power window main switch
9.
Outside key antenna (driver side)
10. Front door switch (driver side)
11. Front door lock assembly (driver side) 12. Front door request switch (driver side)
13. Inside key antenna (luggage room)
14. Back door request switch
15. Back door lock assembly
16. Outside antenna (rear bumper)
17. Front door request switch (passenger
side)
18. Outside key antenna (passenger side)
19. IPDM E/R
A.
View with front bumper removed
B.
View with instrument panel assembly
removed
C.
View with multi display unit removed
D.
View with luggage room finisher re-
moved
E.
View with rear bumper removed
Item
Function
BCM
Controls the door lock system.
Back door opener actuator
Opens the back door with the back door open signal from BCM.
Back door opener switch
Inputs back door opener switch operation signal to BCM.
Combination meter
• Displays each operation method guide and warning for system malfunction.
• Performs operation method guide and warning with buzzer.
• Transmits vehicle seep signal to CAN communication line.
Door lock actuator
• Inputs locks/unlocks signal from BCM and locks/unlocks each door.
• Integrated in each door lock assembly.
Door lock and unlock switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the power window main switch and front power window switch (passenger side).
Door request switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the outside handle (driver side, passenger side and back door).
Door switch
Detects door open/close condition.
Inside key antenna
• Detects whether Intelligent Key is inside the vehicle.
• Installed in the instrument center and luggage room.
Intelligent Key
The following functions are available when having and carrying electronic ID.
• Door lock/unlock
• Engine start
• Remote control entry function is available when operating on button.
Intelligent Key warning buzzer
Warns for an inappropriate operation.
IPDM E/R
Sounds horn via CAN communication between BCM.
Outside key antenna
• Detects whether Intelligent Key is outside the vehicle.
• Integrated in the outside handle (driver side, passenger side and back door).
Push-button ignition switch
• BCM transmits the change in the power supply position with the push-button ignition switch to
IPDM E/R via CAN communication line. IPDM E/R transmits the power supply position status
via CAN communication line to BCM.
• Immobilizer antenna amp checks Intelligent Key transponder.
Remote keyless entry receiver
Receives Intelligent Key operation and transmits to BCM.
TCM
Transmits shift position signal to BCM via CAN communication line
SYSTEM (POWER DOOR LOCK SYSTEM)
DLK-11
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM (POWER DOOR LOCK SYSTEM)
System Diagram
INFOID:0000000012196580
System Description
INFOID:0000000012196581
DOOR LOCK FUNCTION
Door Lock and Unlock Switch
• The door lock and unlock switch (driver side) is build into power window main switch.
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors actu-
ator are unlocked.
Door Key Cylinder Switch
• With the mechanical key inserted in the door key cylinder on driver side, turning it to lock position, locks door
lock actuator of all doors.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to unlock position once
unlocks the driver side door, turning it to unlock position again within 5 seconds after the first unlock opera-
tion unlocks all of the other doors actuator. (SELECTIVE UNLOCK OPERATION)
Selective unlock operation mode can be changed using CONSULT.
DLK-26, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
IGNITION POSITION WARNING FUNCTION
When door lock and unlock switch are operated while driver side door is open and ignition position is ACC or
ON, door locks once but immediately unlocks.
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock /unlock state, refer to
CONTROL SYSTEM : System Description"
AUTOMATIC DOOR LOCK/UNLOCK FUNCTION (LOCK OPERATION)
The interlock door lock function is the function that locks all doors linked with the vehicle speed or shift posi-
tion. It has 2 types as per the following items.
Vehicle Speed Sensing Auto Door Lock
All doors are locked when the vehicle speed reaches 24 km/h (15 MPH) or more.
BCM outputs the lock signal to all door lock actuators when it detects that the ignition switch is turned ON, all
doors are closed and the vehicle speed received from the combination meter via CAN communication
becomes 24 km/h (15 MPH) or more.
P Range Interlock Door Lock*
All doors are locked when shifting the selector lever from the P position to any position other than P.
BCM outputs the lock signal to all door lock actuators when it detects that the ignition switch is in the ON posi-
tion and the shift signal received from the TCM via CAN communication is shifted from the P position to any
position other than P.
JMKIA6117GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст