Nissan Juke F15. Manual — part 1060
PG-100
< BASIC INSPECTION >
FUSE INSPECTION
FUSE INSPECTION
How To Check
INFOID:0000000012199814
• If fuse is blown, be sure to eliminate cause of malfunction before
installing new fuse.
• Use fuse of specified rating. Never use fuse of more than specified
rating.
• Do not partially install fuse; always insert it into fuse holder prop-
erly.
• Remove fuse for “ELECTRICAL PARTS (BAT)” if vehicle is not
used for a long period of time.
EXTENDED STORAGE FUSE SWITCH (IF EQUIPPED)
The following switch may be mounted on the fuse block (Junction Box) for transportation and storage.
• Remove the extended storage fuse switch when replacing the fuse of extended storage fuse switch.
• Remove the extended storage fuse switch if it causes the interference when the fuse or the other fuses is
checked.
How To Extended Storage Fuse Switch ON/OFF
CAUTION:
• Turn the ignition switch OFF when operating the extended storage fuse switch.
• Under normal conditions, keep the extended storage fuse switch in ON state. Never operate the
extended storage fuse switch except when necessary.
CEL083
1.
Extended storage fuse switch
A.
Type A
B.
Type B
C.
Type C
JSMIA0793ZZ
PG
FUSE INSPECTION
PG-101
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
• Type A
- To turn the extended storage fuse switch OFF, pull it up in (A) direction as shown in the figure.
- To turn the extended storage fuse switch ON, press it in (B) direction as shown in the figure.
• Type B
- To turn the extended storage fuse switch OFF, hold (A) of the switch and pull up in (B) direction as shown in
the figure.
- To turn the extended storage fuse switch ON, press it in (C) direction as shown in the figure.
• Type C
- To turn the extended storage fuse switch OFF, pull it up in (A) direction as shown in the figure.
- To turn the extended storage fuse switch ON, press it in (B) direction as shown in the figure.
How To Remove Extended Storage Fuse Switch
Type A
JSMIA0472ZZ
JSMIA0473ZZ
JSMIA0794ZZ
PG-102
< BASIC INSPECTION >
FUSE INSPECTION
1. Turn the ignition switch OFF.
2. Turn the extended storage fuse switch OFF.
3. Press pawl (A) and tilt to disengage the extended storage fuse
switch. Press pawl (B) and tilt to remove the extended storage
fuse switch.
NOTE:
• Extended storage fuse switch and fuse are removed together. Remove fuse from extended storage fuse
switch, if necessary.
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
Type B
1. Turn the ignition switch OFF.
2. Turn the extended storage fuse switch OFF.
3. Hold (A) and pull up the extended storage fuse switch hard in
(B) direction.
NOTE:
• Extended storage fuse switch and fuse may be removed together. Remove fuse from extended storage
fuse switch, if necessary.
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
Type C
1. Turn the ignition switch OFF.
2. Turn the extended storage fuse switch OFF.
3. Hold (A) and pull up the extended storage fuse switch hard in
(B) direction.
NOTE:
• Extended storage fuse switch and fuse are removed together. Remove fuse from extended storage fuse
switch, if necessary.
JSMIA0476ZZ
JSMIA0477ZZ
JSMIA0795ZZ
PG
FUSE INSPECTION
PG-103
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст