Nissan Juke F15. Manual — part 748
EXL-212
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
DAYTIME RUNNING LIGHT
DAYTIME RUNNING LIGHT
Exploded View
INFOID:0000000012201789
Removal and Installation
INFOID:0000000012201790
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
REMOVAL
1. Remove front bumper fascia lower. Refer to
EXT-17, "Removal and Installation"
.
2. Disconnect daytime running light harness connector.
3. Remove daytime running light mounting nuts.
4. Remove daytime running light from front bumper fascia lower.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000012201791
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
DAYTIME RUNNING LIGHT
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace day-
time running light as a set. Refer to
EXL-212, "Removal and Installation"
.
1.
Daytime running light
2.
Front bumper fascia assembly
3.
U nut
4
Harness connector assembly
N·m (kg-m, in-lb)
JMLIA3676GB
FRONT FOG LAMP
EXL-213
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP
Exploded View
INFOID:0000000012201792
Removal and Installation
INFOID:0000000012201793
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
REMOVAL
1. Remove front fender protector to make work space. Refer to
EXT-31, "Removal and Installation"
2. Disconnect front fog lamp harness connector.
3. Remove front fog lamp fixing screws, and then remove front fog lamp from front fog lamp bracket.
4. Remove front fog lamp bracket mounting bolt and fixing clips, and then remove front fog lamp bracket.
1.
Front bumper fascia assembly
2.
Front fog lamp bracket
3.
Front fog lamp bulb
4.
Front fog lamp
5.
U nut
: Vehicle front
: N·m (kg-m, in-lb)
JMLIA5401GB
EXL-214
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT FOG LAMP
INSTALLATION
Note the following item, and then install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000012201794
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1. Remove fender protector to make work space. Refer to
EXT-31, "Removal and Installation"
.
2. Remove front fog lamp bulb connector (1).
3. Rotate front fog lamp bulb (2) counterclockwise and unlock it.
JPLIA0345ZZ
SIDE TURN SIGNAL LAMP
EXL-215
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SIDE TURN SIGNAL LAMP
Exploded View
INFOID:0000000012201795
.
Removal and Installation
INFOID:0000000012201796
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
REMOVAL
1. Remove door mirror cover. Refer to
MIR-20, "DOOR MIRROR COVER : Removal and Installation"
2. Remove side turn signal lamp fixing screws (A), and then dis-
connect side turn signal lamp harness connector (B).
3. Remove side turn signal lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000012201797
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-119, "Precautions for Removing Battery Terminal"
SIDE TURN SIGMNAL LAMP BULB
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace side
turn signal lamp as a set. Refer to
EXL-215, "Removal and Installation"
JMLIA5402ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст