Nissan Juke F15. Manual — part 761
FLOOR SIDE FAIRING
EXT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FLOOR SIDE FAIRING
Exploded View
INFOID:0000000012199322
Removal and Installation
INFOID:0000000012199323
REMOVAL
FLOOR UNDER COVER
Remove floor under cover mounting nut and push spring nuts, and then remove floor under cover.
INSTALLATION
Install in the reverse order of removal.
1.
Push spring nut
2.
Floor under cover RH
3.
Floor under cover LH
JMKIA5648ZZ
EXT-36
< REMOVAL AND INSTALLATION >
FILLET MOLDING
FILLET MOLDING
Exploded View
INFOID:0000000012199324
FRONT FILLET MOLDING
FRONT FILLET MOLDING : Removal and Installation
INFOID:0000000012199325
REMOVAL
1. Remove front fillet molding fixing clips.
2. Remove front fillet molding front side fixing pawls.
CAUTION:
Never pull the front fillet molding strongly.
1.
Grommet
2.
Clip
3.
Clip
4.
Front fillet molding
5.
Rear fillet molding
: Pawl
: Always replace after every disassembly.
, , , : Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIA5582ZZ
: Pawl
JMKIA5583ZZ
FILLET MOLDING
EXT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
3. Using remover tool (A), disengage the clips from front fillet mold-
ing by starting from front side.
CAUTION:
• Apply a protective tape (B) on the body to protect the
painted surface from damage.
• Never pull the front fillet molding strongly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Always replace fillet molding fixing clips.
• When installing front fillet molding, check that blind clips and pawls are securely fitted in panel holes
on body, and then press them in.
REAR FILLET MOLDING
REAR FILLET MOLDING : Removal and Installation
INFOID:0000000012199326
REMOVAL
1. Remove rear filet molding fixing clip from end of sill cover.
2. Remove rear fillet molding rear side fixing pawls.
CAUTION:
Never pull the rear fillet molding strongly.
3. Using remover tool (A), disengage the clips from rear fillet mold-
ing by starting from rear side.
CAUTION:
• Apply a protective tape (B) on the body to protect the
painted surface from damage.
• Never pull the rear fillet molding strongly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Always replace fillet molding fixing clips.
• When installing rear fillet molding, check that blind clips and pawls are securely fitted in panel holes
on body, and then press them in.
: Clip
JMKIA5584ZZ
: Pawl
JMKIA5585ZZ
: Clip
JMKIA5586ZZ
EXT-38
< REMOVAL AND INSTALLATION >
ROOF SIDE MOLDING
ROOF SIDE MOLDING
Exploded View
INFOID:0000000012199327
Removal and Installation
INFOID:0000000012199328
REMOVAL
Roof Side Molding
1. Disengage roof side molding rear side fixing clip, using a
remover tool (A).
CAUTION:
Apply protective tape (B) on body to protect the painted
surface from damage.
1.
Roof side molding
2. Roof side molding clip
3.
Double-sided tape
[t: 2.5 mm (0.098 in)]
4.
Body side outer panel
5. Roof panel
: Vehicle front
: Always replace after every disassembly.
JMKIA5649ZZ
: Clip
: Vehicle front
JMKIA5770ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст