Nissan Juke F15. Manual — part 1063
PRECAUTIONS
PWC-5
< PRECAUTION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
• Turbocharger cooling pump may operate in a few minutes after the ignition switch is turned OFF.
• Example of high-load driving
- Driving for 30 minutes or more at 140 km/h (86 MPH) or more.
- Driving for 30 minutes or more on a steep slope.
• For vehicles with the 2-batteries, be sure to connect the main battery and the sub battery before turning ON
the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of main battery and sub battery discon-
nected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
PWC-6
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000012196894
Tool name
Description
Remover tool
Removes the clips, pawls and metal clips
JMKIA3050ZZ
COMPONENT PARTS
PWC-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000012196895
1.
BCM
Refer to
SYSTEM : Component Parts Loca-
tion"
2.
Power window main switch
3.
Front power window motor (driv-
er side)
4.
Front door switch (driver side)
5.
Rear power window switch LH
6.
Rear power window motor LH
A.
View with front door finisher removed B.
View with rear door finisher removed
JMKIA6075ZZ
PWC-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
Component Description
INFOID:0000000012196896
Component parts
Description
BCM
• Supplies power supply to power window switch.
• Controls retained power.
Power window main switch
• Directly controls all power window motor of all doors.
• Controls anti-pinch operation of power window.
Front power window switch (passenger side) Controls power window motor of front passenger side door.
Rear power window switch (LH & RH)
Controls power window motor of rear door (LH & RH).
Front power window motor (driver side)
• Integrates the encoder and power window motor.
• Operates with signals from power window main switch.
• Transmits front power window motor (driver side) rotation as a pulse signal to
power window main switch.
Front power window motor (passenger side)
Operates with signals from power window main switch and front power window
switch (passenger side).
Rear power window motor (LH & RH)
Operates with signals from power window main switch and rear power window
switch (LH & RH).
Encoder
Detects condition of the front power window motor (driver side) operation and
transmits to power window main switch as pulse signal.
Front door switch
Detects door open/close condition and transmits to BCM.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст