Nissan Juke F15. Manual — part 114
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
BRC-47
< ECU DIAGNOSIS INFORMATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
DTC
Malfunction detected condition
Fail-safe condition
C1101
When an open circuit is detected in rear RH wheel sensor circuit.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function (only when both 2
rear wheels are malfunctioning)
• Brake limited slip differential
(BLSD) function
C1102
When an open circuit is detected in rear LH wheel sensor circuit.
C1103
When an open circuit is detected in front RH wheel sensor circuit.
C1104
When an open circuit is detected in front LH wheel sensor circuit.
C1105
• When a short circuit is detected in rear RH wheel sensor circuit.
• When power supply voltage of rear RH wheel sensor is in following state.
- Rear RH wheel sensor power supply voltage: 7.5 V
≥ Rear RH wheel sensor pow-
er supply voltage
- Rear RH wheel sensor power supply voltage: 16 V
≤ Rear RH wheel sensor power
supply voltage
• When distance between rear RH wheel sensor and rear RH wheel sensor rotor is
large.
• When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not
normal.
C1106
• When a short circuit is detected in rear LH wheel sensor circuit.
• When power supply voltage of rear LH wheel sensor is in following state.
- Rear LH wheel sensor power supply voltage: 7.5 V
≥ Rear LH wheel sensor power
supply voltage
- Rear LH wheel sensor power supply voltage: 16 V
≤ Rear LH wheel sensor power
supply voltage
• When distance between rear LH wheel sensor and rear LH wheel sensor rotor is
large.
• When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not nor-
mal.
C1107
• When a short circuit is detected in front RH wheel sensor circuit.
• When power supply voltage of front RH wheel sensor is in following state.
- Front RH wheel sensor power supply voltage: 7.5 V
≥ Front RH wheel sensor
power supply voltage
- Front RH wheel sensor power supply voltage: 16 V
≤ Front RH wheel sensor pow-
er supply voltage
• When distance between front RH wheel sensor and front RH wheel sensor rotor
is large.
• When installation of front RH wheel sensor or front RH wheel sensor rotor is not
normal.
C1108
• When a short circuit is detected in front LH wheel sensor circuit.
• When power supply voltage of front LH wheel sensor is in following state.
- Front LH wheel sensor power supply voltage: 7.5 V
≥ Front LH wheel sensor pow-
er supply voltage
- Front LH wheel sensor power supply voltage: 16 V
≤ Front LH wheel sensor power
supply voltage
• When distance between front LH wheel sensor and front LH wheel sensor rotor is
large.
• When installation of front LH wheel sensor or front LH wheel sensor rotor is not
normal.
C1109
When ignition power supply voltage is in following state.
• Ignition power supply voltage: 10 V
≥ Ignition power supply voltage.
• Ignition power supply voltage: 16 V
≤ Ignition power supply voltage.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential
(BLSD) function
C1110
When there is an internal malfunction in the ABS actuator and electric unit (control
unit).
C1111
When a malfunction is detected in motor or motor relay.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• Brake limited slip differential
(BLSD) function
BRC-48
< ECU DIAGNOSIS INFORMATION >
[WITH VDC]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
C1113
When a malfunction is detected in decel G signal, or signal line of yaw rate/side/de-
cel G sensor is open or shorted.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential
(BLSD) function
C1115
When difference in wheel speed between any wheel and others is detected the ve-
hicle is driven, because of installation of other tires than specified.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential
(BLSD) function
C1116
When stop lamp switch signal is not input when brake pedal operates.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
C1120
When a malfunction is detected in front LH ABS IN valve.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential
(BLSD) function
C1121
When a malfunction is detected in front LH ABS OUT valve.
C1122
When a malfunction is detected in front RH ABS IN valve.
C1123
When a malfunction is detected in front RH ABS OUT valve.
C1124
When a malfunction is detected in rear LH ABS IN valve.
C1125
When a malfunction is detected in rear LH ABS OUT valve.
C1126
When a malfunction is detected in rear RH ABS IN valve.
C1127
When a malfunction is detected in rear RH ABS OUT valve.
C1130
When a malfunction is detected in ECM system.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
C1140
When a malfunction is detected in actuator relay.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential
(BLSD) function
C1143
When a malfunction is detected in steering angle sensor.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential
(BLSD) function
C1144
When neutral position adjustment of steering angle sensor is not complete.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
DTC
Malfunction detected condition
Fail-safe condition
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
BRC-49
< ECU DIAGNOSIS INFORMATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
DTC Inspection Priority Chart
INFOID:0000000012199672
When multiple DTCs are displayed simultaneously, check one by one depending on the following priority list.
C1145
When a malfunction is detected in yaw rate signal, or signal line of yaw rate/side/
decel G sensor is open or shorted.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential
(BLSD) function
C1146
When a malfunction is detected in side G signal, or signal line of yaw rate/side/decel
G sensor is open or shorted.
C1155
When brake fluid level low signal is detected.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
C1164
When a malfunction is detected in cut valve 1.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential
(BLSD) function
C1165
When a malfunction is detected in cut valve 2.
C1166
When a malfunction is detected in suction valve 1.
C1167
When a malfunction is detected in suction valve 2.
C1170
When the information in ABS actuator and electric unit (control unit) is not the same.
The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• Brake limited slip differential
(BLSD) function
C1176
When brake pedal position switch signal is not input when brake pedal operates.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
U1000
When CAN communication signal is not continuously transmitted or received for 2
seconds or more.
The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential
(BLSD) function
U1010
When detecting error during the initial diagnosis of CAN controller of ABS actuator
and electric unit (control unit).
DTC
Malfunction detected condition
Fail-safe condition
Priority
Detected item (DTC)
1
• U1000 CAN COMM CIRCUIT
• U1010 CONTROL UNIT (CAN)
2
• C1110 CONTROLLER FAILURE
• C1170 VARIANT CODING
3
• C1130 ENGINE SIGNAL 1
• C1144 ST ANG SEN SIGNAL
4
• C1109 BATTERY VOLTAGE [ABNORMAL]
• C1111 PUMP MOTOR
• C1140 ACTUATOR RLY
BRC-50
< ECU DIAGNOSIS INFORMATION >
[WITH VDC]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
DTC Index
INFOID:0000000012199673
5
• C1101 RR RH SENSOR-1
• C1102 RR LH SENSOR-1
• C1103 FR RH SENSOR-1
• C1104 FR LH SENSOR-1
• C1105 RR RH SENSOR-2
• C1106 RR LH SENSOR-2
• C1107 FR RH SENSOR-2
• C1108 FR LH SENSOR-2
• C1113 G-SENSOR
• C1115 ABS SENSOR [ABNORMAL SIGNAL]
• C1116 STOP LAMP SW
• C1120 FR LH IN ABS SOL
• C1121 FR LH OUT ABS SOL
• C1122 FR RH IN ABS SOL
• C1123 FR RH OUT ABS SOL
• C1124 RR LH IN ABS SOL
• C1125 RR LH OUT ABS SOL
• C1126 RR RH IN ABS SOL
• C1127 RR RH OUT ABS SOL
• C1143 ST ANG SEN CIRCUIT
• C1145 YAW RATE SENSOR
• C1146 SIDE G SEN CIRCUIT
• C1164 CV 1
• C1165 CV 2
• C1166 SV 1
• C1167 SV 2
• C1176 STOP LAMP SW2
6
• C1155 BR FLUID LEVEL LOW
Priority
Detected item (DTC)
DTC
Display Item
Refer to
C1101
RR RH SENSOR-1
C1102
RR LH SENSOR-1
C1103
FR RH SENSOR-1
C1104
FR LH SENSOR-1
C1105
RR RH SENSOR-2
C1106
RR LH SENSOR-2
C1107
FR RH SENSOR-2
C1108
FR LH SENSOR-2
C1109
BATTERY VOLTAGE [ABNORMAL]
C1110
CONTROLLER FAILURE
C1111
PUMP MOTOR
C1113
G-SENSOR
C1115
ABS SENSOR [ABNORMAL SIGNAL]
C1116
STOP LAMP SW
C1120
FR LH IN ABS SOL
C1121
FR LH OUT ABS SOL
C1122
FR RH IN ABS SOL
C1123
FR RH OUT ABS SOL
C1124
RR LH IN ABS SOL
C1125
RR LH OUT ABS SOL
C1126
RR RH IN ABS SOL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст