Nissan Juke F15. Manual — part 1332
TM-518
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
P0967 PRESSURE CONTROL SOLENOID B
NO
>> There is malfunction of primary pressure solenoid valve. Replace transaxle assembly. Refer to
P17F0 CVT JUDDER (T/M INSPECTION)
TM-519
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
P17F0 CVT JUDDER (T/M INSPECTION)
DTC Description
INFOID:0000000013014558
DTC DETECTION LOGIC
POSSIBLE CAUSE
Transmission assembly
FAIL-SAFE
Not changed from normal driving
DTC CONFIRMATION PROCEDURE
CAUTION:
•
must be performed before starting “DTC CONFIRMATION PROCE-
DURE”.
• Always drive vehicle at a safe speed.
1.
PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at
least 10 seconds, then perform the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).
2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.
3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.
4. Repeat steps 1 to 3 above 5 times.
Is “P17F0” detected?
YES
>> Go to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000013014559
1.
REPLACE TRANSAXLE ASSEMBLY
Replace the transaxle assembly. Refer to
TM-577, "Removal and Installation"
.
>> END
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P17F0
CVT JUDDER (T/M INSPECTION)
[CVT Judder (Transmission inspection)]
Diagnosis condition
—
Signal
—
Threshold
Malfunction in chain belt and pulley
Diagnosis delay time
—
TM-520
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
P17F1 CVT JUDDER (C/V INSPECTION)
P17F1 CVT JUDDER (C/V INSPECTION)
DTC Description
INFOID:0000000013014560
DTC DETECTION LOGIC
CAUTION:
If DTC P17F1 is displayed with DTC P17F0, perform only trouble diagnosis of DTC P17F0. Refer to
.
POSSIBLE CAUSE
Control valve
FAIL-SAFE
Not changed from normal driving
DTC CONFIRMATION PROCEDURE
CAUTION:
•
must be performed before starting “DTC CONFIRMATION PROCE-
DURE”.
• Always drive vehicle at a safe speed.
1.
PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at
least 10 seconds, then perform the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).
2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.
3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.
4. Repeat steps 1 to 3 above 5 times.
Is “P17F1” detected?
YES
>> Go to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000013014561
1.
REPLACE TRANSAXLE ASSEMBLY
There is malfunction of control valve. Replace the transaxle assembly. Refer to
.
>> END
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P17F1
CVT JUDDER (C/V INSPECTION)
[CVT judder (Control Valve Inspection)]
Diagnosis condition
—
Signal
—
Threshold
Malfunction in control valve
Diagnosis delay time
—
P17F2 CVT JUDDER (T/C INSPECTION)
TM-521
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
P17F2 CVT JUDDER (T/C INSPECTION)
DTC Description
INFOID:0000000013014562
DTC DETECTION LOGIC
POSSIBLE CAUSE
Torque converter
FAIL-SAFE
Not changed from normal driving
DTC CONFIRMATION PROCEDURE
CAUTION:
•
must be performed before starting “DTC CONFIRMATION PROCE-
DURE”.
• Always drive vehicle at a safe speed.
1.
PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at
least 10 seconds, then perform the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).
2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.
3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.
4. Repeat steps 1 to 3 above 5 times.
Is “P17F2” detected?
YES
>> Go to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000013014563
1.
REPLACE TORQUE CONVERTER
Replace the torque converter. Refer to
>> END
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P17F2
CVT JUDDER (T/C INSPECTION)
[CVT judder (Torque Converter Inspec-
tion)]
Diagnosis condition
—
Signal
—
Threshold
Malufunction in torque converter
Diagnosis delay time
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст