Nissan Juke F15. Manual — part 1117
REAR SEAT
SE-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
SEATBACK : Removal and Installation
INFOID:0000000012196886
LH SIDE SEATBACK
Removal
CAUTION:
Remove seatback with seat cushion installed.
1. Temporarily move seat cushion to the position where center anchor of center seat belts can be removed.
2. Remove center anchor mounting bolt of center seat belt. Remove center anchor.
3. Return seat cushion to the normal position.
4. Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests.
5. Fold seatback toward vehicle front.
6. Pull up seatback carpet (A). Remove mounting bolts (B) of seat-
back hinge portion.
7. Remove seatback from the vehicle.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• Install seat cushion to the vehicle, and then install seatback.
• Temporarily tighten bolts, fold up seatback, check that lock and striker do not interfere, and then
tighten bolts.
• When installing seatback, tighten mounting bolts according to
the numerical order (1, 2, 3, and 4 as shown in the figure).
RH SIDE SEATBACK
Removal
CAUTION:
Remove seatback with seat cushion installed.
1. Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests.
2. Fold seatback toward vehicle front.
JMJIA4836ZZ
JMJIA4837ZZ
SE-34
< REMOVAL AND INSTALLATION >
REAR SEAT
3. Pull up seatback carpet (A). Remove mounting bolts (B) of seat-
back hinge portion.
4. Remove seatback from the vehicle.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• Install seat cushion to the vehicle, and then install seatback.
• Temporarily tighten bolts, fold up seatback, check that lock and striker do not interfere, and then
tighten bolts.
• When installing seatback, tighten mounting bolts according to
the numerical order (1, 2, 3, and 4 as shown in the figure).
SEATBACK : Disassembly and Assembly
INFOID:0000000012196887
DISASSEMBLY
LH side seatback
1. Remove headrest holder.
1. Pull seat lock cover in direction indicated by the arrow as
shown in the figure. Remove seat lock cover.
JMJIA4838ZZ
JMJIA4839ZZ
: Metal clip
JMJIA4372ZZ
REAR SEAT
SE-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
2. Pull tether cover in direction indicated by the arrow as
shown in the figure. Remove tether cover.
3. Open seatback fastener (A) and remove seatback retainer
(B).
4. Use pincers, etc., to press up pawls as shown by the arrows
in the figure, and remove headrest holder from seatback.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
2. Remove seatback lock knob finisher.
1. Rotate seatback lock knob counterclockwise. Remove seat-
back lock knob.
: Pawl
JMJIA4611ZZ
JMJIA4371ZZ
PIIB4084J
JMJIA4374ZZ
SE-36
< REMOVAL AND INSTALLATION >
REAR SEAT
2. Push up seatback lock knob finisher while pressing pawls
indicated by arrows as shown in the figure. Remove seat-
back lock finisher from seatback.
CAUTION:
When installing seatback lock knob finisher, check
front and rear orientation and be careful to install it nor-
mally.
3. Remove center seat belt finisher from seatback.
Lift up front of center seat belt finisher. Disengage front pawls.
Pull center seat belt finisher toward seat front. Disengage rear
pawls.
4. Remove seatback trim and seatback pad from seatback frame
5. Remove hog rings, and separate the seatback trim and seatback pad.
CAUTION:
Before performing separating operation, check the installation position of hog rings.
6. Remove seatback silencer from seatback frame.
7. Remove seatback lock assembly mounting bolts, and then remove seatback lock assembly from seatback
frame.
8. Remove center seat belt retractor from seatback frame.
SB-13, "SEAT BELT RETRACTOR : Removal and Installation"
RH side seatback
1. Remove headrest holder.
1. Pull seat lock cover in direction indicated by the arrow as
shown in the figure. Remove seat lock cover.
JMJIA4375ZZ
: Pawl
JMJIA4373ZZ
: Metal clip
JMJIA4370ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст