Nissan Juke F15. Manual — part 1013
PARKING BRAKE SHOE
PB-9
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
PARKING BRAKE SHOE
Exploded View
INFOID:0000000012200169
Removal and Installation
INFOID:0000000012200170
REMOVAL
WARNING:
Since dust covering the parking brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
1. Remove rear tires with power tool.
2. Remove disc rotor.
• 2WD: Refer to
RAX-7, "Removal and Installation"
.
• AWD: Refer to
RAX-16, "Removal and Installation"
.
CAUTION:
Parking brake completely in the released position.
1.
Anti-rattle pin
2.
Back plate
3.
Toggle lever
4.
Parking brake shoe
5.
Brake strut
6.
Return spring
7.
Spring
8.
Adjuster
: Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease.
JPFIB0086ZZ
PB-10
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
3. Remove return spring (1) of the upper side.
4. Remove return spring (1) of the lower side.
5. Remove spring (1).
CAUTION:
Never drop the removed parts.
6. Remove parking brake shoes, adjuster, brake strut and toggle
lever.
CAUTION:
• The parking brake shoes for the front wheels are made of
different materials from those for the rear wheels. Never
misidentify them when removing.
• Never drop the removed parts.
7. Press the rear cable spring (1) against spring tension to remove
rear cable (3) from the clamp (A) of toggle lever (2).
CAUTION:
Never bend rear cable.
8. For the removal of back plate.
• 2WD: Refer to
RAX-7, "Removal and Installation"
.
• AWD: Refer to
RAX-16, "Removal and Installation"
.
INSTALLATION
Note the following, install in the reverse order of removal.
• Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to the back plate and brake shoe.
CAUTION:
The parking brake shoes for the front wheels are made of different materials from those for the rear
wheels. Never misidentify them when removing and replacing.
JSFIA0485ZZ
JSFIA0486ZZ
JSFIA0487ZZ
JSFIA0488ZZ
PARKING BRAKE SHOE
PB-11
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
• Assemble adjusters so that threaded part is expanded when rotat-
ing it in the direction shown by arrow.
• Shorten adjuster by rotating it.
• When disassembling apply PBC (Poly Butyl Cuprysil) grease or sil-
icone-based grease to threads.
• Check that the component parts of the parking brake shoe are
properly installed.
• Check brake shoe sliding surface and drum inner surface for
grease. Wipe it off if it adhere on the surfaces.
Inspection and Adjustment
INFOID:0000000012200171
INSPECTION AFTER REMOVAL
Lining Thickness Inspection
• Check thickness (A) of lining.
Drum Inner Diameter Inspection
• Check inner diameter (B) of drum.
Other Inspections
Check the following items, and replace the parts if necessary.
• Lining for excessive wear, damage, and peeling.
• Brake shoe sliding surface for excessive wear and damage.
• Anti-rattle pin for excessive wear, damage and rust.
• Return spring and spring for settling, excessive wear, damage, and rust.
A : For right side brake
B : For left side brake
: Vehicle front
: Adjuster expands
JPFIB0087ZZ
JSFIA0489ZZ
A
: Refer to
.
SBR021A
B
: Refer to
.
JPFIB0008ZZ
PB-12
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
• Adjuster for smoothness.
• Toggle lever and brake strut for excessive wear, damage and rust.
• Visually check inside of the drum for excessive wear, cracks, and damage with a pair of vernier calipers.
ADJUSTMENT AFTER INSTALLATION
1. Adjust the parking brake lever stroke. Refer to
PB-4, "Inspection and Adjustment"
.
2. Rotate the disc rotor to check that there is no drag. Install the plug. If any drag is found, follow the proce-
dure described below.
a. Adjust parking brake stroke again.
b. Check rear disc brake. Refer to
BR-67, "BRAKE CALIPER ASSEMBLY : Inspection"
.
3. Adjust the parking brake shoe. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст