Nissan Juke F15. Manual — part 1007
MWI-50
< DTC/CIRCUIT DIAGNOSIS >
B2205 VEHICLE SPEED
B2205 VEHICLE SPEED
Description
INFOID:0000000012201327
Vehicle speed signal is transmitted from ABS actuator and electric unit (control unit) via CAN communication
to combination meter.
DTC Logic
INFOID:0000000012201328
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000012201329
1.
PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Perform “Self Diagnostic Result” of “ABS”, and repair or replace malfunctioning parts.
>> Refer to
DTC
Display contents of
CONSULT
Diagnostic item is detected when...
Probable malfunction location
B2205
VEHICLE SPEED
An abnormal vehicle speed signal is input
from ABS actuator and electric unit (control
unit) for 2 seconds or more
• Wheel sensor
• ABS actuator and electric unit (control unit)
MWI
B2267 ENGINE SPEED
MWI-51
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
B2267 ENGINE SPEED
Description
INFOID:0000000012201330
• The engine speed signal is transmitted from TCM to the combination meter via CAN communication (CVT
models).
• The engine speed signal is transmitted from ECM to the combination meter via CAN communication (M/T
models).
DTC Logic
INFOID:0000000012201331
DTC DETECTION LOGIC
CVT models
M/T models
Diagnosis Procedure
INFOID:0000000012201332
1.
PERFORM SELF-DIAGNOSIS OF ECM
Perform “Self Diagnostic Result” of “ENGINE”. Refer to
(MR FOR NISMO RS MODELS)
(MR EXCEPT FOR NISMO RS MODELS).
Is the inspection result normal?
YES-1 >> CVT models: GO TO 2.
YES-2 >> M/T models: INSPECTION END.
NO
>> Repair or replace malfunctioning parts.
2.
PERFORM SELF-DIAGNOSIS OF TCM
Perform “Self Diagnostic Result” of “TRANSMISSION”, and repair or replace malfunctioning parts.
>> Refer to
(RE0F10D).
DTC
Display contents of
CONSULT
Diagnostic item is detected when...
Probable malfunction location
B2267
ENGINE SPEED
TCM continuously transmits abnormal engine
speed signals for 2 seconds or more
• Crankshaft position sensor (POS)
• ECM
• TCM
DTC
Display contents of
CONSULT
Diagnostic item is detected when...
Probable malfunction location
B2267
ENGINE SPEED
ECM continuously transmits abnormal engine
speed signals for 2 seconds or more
• Crankshaft position sensor (POS)
• ECM
MWI-52
< DTC/CIRCUIT DIAGNOSIS >
B2268 WATER TEMP
B2268 WATER TEMP
Description
INFOID:0000000012201333
The engine coolant temperature signal is transmitted from ECM to the combination meter via CAN communi-
cation.
DTC Logic
INFOID:0000000012201334
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000012201335
1.
PERFORM SELF-DIAGNOSIS OF ECM
Perform “Self Diagnosis Result” of “ENGINE”, and repair or replace malfunctioning parts.
>> Refer to
(MR FOR NISMO RS MODELS) or
EXCEPT FOR NISMO RS MODELS).
DTC
Display contents of
CONSULT
Diagnostic item is detected when...
Probable malfunction location
B2268
WATER TEMP
ECM continuously transmits abnormal engine
coolant temperature signals for 60 seconds or
more
• Engine coolant temperature sensor
• ECM
MWI
POWER SUPPLY AND GROUND CIRCUIT
MWI-53
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
POWER SUPPLY AND GROUND CIRCUIT
COMBINATION METER
COMBINATION METER : Diagnosis Procedure
INFOID:0000000012201336
1.
CHECK FUSE
Check for blown fuses.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Be sure to eliminate cause of malfunction before installing new fuse.
2.
CHECK POWER SUPPLY CIRCUIT
Check voltage between combination meter harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Check harness between combination meter and fuse.
3.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter connector.
3. Check continuity between combination meter harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair harness or connector.
Power source
Fuse No.
Battery
13
Ignition switch ON or START
5
Ignition switch ACC or ON
19
Terminals
Ignition switch po-
sition
Voltage
(Approx.)
(+)
(
−)
Combination meter
Ground
Connector
Terminal
M34
27
OFF
Battery voltage
15
ACC
28
ON
Combination meter
Ground
Continuity
Connector
Terminal
M34
21
Existed
22
23
25
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст