Nissan Juke F15. Manual — part 442
ASCD TEMPORARY RELEASE CANNOT BE PERFORMED BY THE CLUTCH
PEDAL
EC-581
< SYMPTOM DIAGNOSIS >
[MR FOR NISMO RS MODELS]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
ASCD TEMPORARY RELEASE CANNOT BE PERFORMED BY THE
CLUTCH PEDAL
Diagnosis Procedure
INFOID:0000000012198126
1.
CHECK DTC WITH ECM
Check that DTC is not displayed.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK CLUTCH PEDAL POSITION SWITCH
EC-572, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning part.
3.
CHECK INTERMITTENT INCIDENT
GI-45, "Intermittent Incident"
.
>> INSPECTION END
EC-582
< SYMPTOM DIAGNOSIS >
[MR FOR NISMO RS MODELS]
INFORMATION DISPLAY IS MALFUNCTIONING
INFORMATION DISPLAY IS MALFUNCTIONING
Diagnosis Procedure
INFOID:0000000012198127
1.
CHECK DTC WITH ECM
Check that DTC is not displayed.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK INFORMATION DISPLAY (ASCD)
EC-574, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning part.
3.
CHECK INTERMITTENT INCIDENT
GI-45, "Intermittent Incident"
>> INSPECTION END
NORMAL OPERATING CONDITION
EC-583
< SYMPTOM DIAGNOSIS >
[MR FOR NISMO RS MODELS]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
NORMAL OPERATING CONDITION
Description
INFOID:0000000012198128
FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
If the engine speed is above 2,500 rpm under no load (for example, the selector lever position is neutral and
engine speed is over 2,500 rpm) fuel will be cut off after some time. The exact time when the fuel is cut off var-
ies based on engine speed.
Fuel cut will be operated until the engine speed reaches 2,000 rpm, then fuel cut will be cancelled.
NOTE:
This function is different from deceleration control listed under direct injection gasoline system,
EC-584
< PERIODIC MAINTENANCE >
[MR FOR NISMO RS MODELS]
IDLE SPEED
PERIODIC MAINTENANCE
IDLE SPEED
Inspection
INFOID:0000000012198129
1.
CHECK IDLE SPEED
With CONSULT
Check idle speed in “DATA MONITOR” mode of “ENGINE” using CONSULT.
With GST
Check idle speed with Service $01 of GST.
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст