Nissan Juke F15. Manual — part 246
DLK-164
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
BACK DOOR LOCK
Exploded View
INFOID:0000000012196742
DOOR LOCK
DOOR LOCK : Removal and Installation
INFOID:0000000012196743
REMOVAL
1. Remove the back door lower finisher. Refer to
INT-39, "BACK DOOR LOWER FINISHER : Removal and
.
2. Remove back door lock assembly mounting bolts.
3. Disconnect back door lock connector, and then remove back door lock assembly.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check back door open/close, and lock/unlock operation.
EMERGENCY LEVER
EMERGENCY LEVER : Unlock procedures
INFOID:0000000012196744
UNLOCK PROCEDURES
NOTE:
If back door lock cannot be unlocked due to a malfunction or battery discharge, follow the procedures to
unlock back door.
1. Remove emergency lid. Refer to
INT-40, "EMERGENCY LID : Removal and Installation"
.
1.
Back door lock assembly
2.
TORX bolt
3.
Back door striker
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Body grease
JMKIA5714GB
BACK DOOR LOCK
DLK-165
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2. From inside the vehicle, rotate emergency lever toward lower
direction and unlock.
JMKIA5616ZZ
DLK-166
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000012196745
FUEL FILLER LID
FUEL FILLER LID : Removal and Installation
INFOID:0000000012196746
REMOVAL
1. Fully open fuel filler lid.
2. Remove fuel mounting pin (1).
3. Remove mounting screws, and then remove fuel filler lid.
INSTALLATION
Note the following items, and install in the reverse order of removal.
1.
Fuel filler lid opener cable
2.
Cable protector
3.
Fuel filler lid lock assembly
4.
Fuel filler lid assembly
5.
Spring
6.
Bumper rubber
: Clip
: Always replace after every disassembly.
JMKIA5904ZZ
JMKIA5717ZZ
FUEL FILLER LID OPENER
DLK-167
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
CAUTION:
• After installation, check fuel filler lid assembly open/close, lock/unlock operation.
• After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
NOTE:
• The following table shows the specified values for checking normal installation status.
• Fitting adjustment cannot be performed.
Unit: mm (in)
FUEL FILLER OPENER CABLE
FUEL FILLER OPENER CABLE : Removal and Installation
INFOID:0000000012196747
REMOVAL
1. Remove hood lock control cable assembly from instrument lower panel (LH). Refer to
LOCK CONTROL CABLE : Removal and Installation"
.
2. Remove fuel filler lid opener cable (2) from fuel filler lid opener
lever (1).
3. Remove front kicking plate inner (LH) and rear kicking plate inner (LH and RH). Refer to
ING PLATE INNER : Removal and Installation"
.
4. Remove dash side finisher (LH). Refer to
INT-21, "DASH SIDE FINISHER : Removal and Installation"
5. Remove center pillar lower garnish (LH). Refer to
INT-22, "CENTER PILLAR LOWER GARNISH :
.
6. Remove luggage side lower finisher (RH). Refer to
INT-35, "LUGGAGE SIDE LOWER FINISHER :
.
7. Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to
LOCK : Removal and Installation"
.
8. Disengage each harness protector (1), and then remove fuel
filler lid opener cable (2).
9. Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
FUEL FILLER LID LOCK
Clearance
Evenness
Fuel filler lid – Body side outer
2.0 – 4.0 (0.079 – 0.157)
(-1.0) – (+1.0) [(-0.039) – (+0.039)]
JMKIA5901ZZ
JMKIA5720ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст