Nissan Juke F15. Manual — part 22
AV-74
< SYSTEM DESCRIPTION >
[AUDIO WITH NAVIGATION]
SYSTEM
Camera Image Operation Principle
• If the camera image calibration is incomplete, the applicable camera position is indicated as an error on the
Birds-Eye view display. (Calibration operation is necessary when replacing each camera or when replacing
around view monitor control unit.)
• Around view monitor control unit receives the camera switch signal via CAN communication from NAVI con-
trol unit by pressing the “CAMERA” switch.
• Around view monitor control unit that receives the camera switch signal supplies the power to each camera
and inputs the camera image from each camera.
• When the selector lever is in the reverse position, around view monitor control unit receives the reverse sig-
nal, supplies the power to each camera, and inputs the camera image from each camera.
• Around view monitor control unit that receives the camera image signal from each camera cuts out the
required screen for each view, superimposes the camera image, vehicle icon, guiding lines, and outputs
them to the NAVI control unit.
Precautions for Vehicle Width Guide Line and Predictive Course Line Display on The Rear View Monitor Display
Side distance guide lines and predictive course line on the display may be different from actual lines depend-
ing on vehicle conditions and road conditions.
PRECAUTIONS FOR ROAD CONDITIONS
• Since guide lines and predictive course line are drawn based on the road, a different distance may be dis-
played if a protruding block is present nearby.
JSNIA8941GB
AV
SYSTEM
AV-75
< SYSTEM DESCRIPTION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PRECAUTIONS FOR BLOCK
• Since guide lines and predictive course line are drawn based on the road, a different distance may be dis-
played if a protruding block is present nearby.
Fail-Safe (Around View Monitor Control Unit)
INFOID:0000000012202497
JSNIA8942GB
DTC
Display contents of CONSULT
Malfunction detection condition
Fail-safe condition
C1A03
VHCL SPEED SE CIRC
If the vehicle speed signal (wheel speed) from
ABS actuator and electric unit (control unit) re-
ceived by the around view monitor control unit
via CAN communication, are inconsistent
MOD (Moving Object Detection) function is
cancel
C1A39
STRG SEN CIR
If the steering angle sensor is malfunction
• MOD (Moving Object Detection) function is
cancel
• Predicted course line is not displayed.
U0122
VDC P-RUN DIAGNOSIS
If around view monitor control unit detects an
error signal that is received from ABS actuator
and electric unit (control unit) via CAN commu-
nication
MOD (Moving Object Detection) function is
cancel
U0416
VDC CHECKSUM DIAGNOSIS
If around view monitor control unit detects an
error signal that is received from ABS actuator
and electric unit (control unit) via CAN commu-
nication
MOD (Moving Object Detection) function is
cancel
U0428
ST ANGLE SENSOR CALIBRA-
TION
Neutral position adjustment of steering angle
sensor is not complete.
• MOD (Moving Object Detection) function is
cancel
• Predicted course line is not displayed.
AV-76
< SYSTEM DESCRIPTION >
[AUDIO WITH NAVIGATION]
SYSTEM
U1000
CAN COMM CIRCUIT
When around view monitor control unit cannot
transmit/receive CAN communication signal
continuously for 2 seconds or more.
The following functions are stopped
• When communication of steering angle
sensor signal is not normal
- Predicted course line is not displayed.
- MOD (Moving Object Detection) function is
stopped.
• When communication of vehicle signal,
wheel speed sensor signal, and shift signal
is not normal
- MOD (Moving Object Detection) function is
stopped.
U1010
CONTROL UNIT (CAN)
CAN initial diagnosis malfunction is detected.
The system using the CAN communication
signal does not function.
U111A
REAR CAMERA IMAGE SIGNAL
No-signal status of rear camera image signal is
continued for 500 ms or more while ignition
switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.
Camera image is not displayed (Gray screen
display).
U111B
SIDE CAMERA RH IMAGE SIG-
NAL
No-signal status of side camera RH image sig-
nal is continued for 500 ms or more while igni-
tion switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.
Camera image is not displayed (Gray screen
display).
U111C
FRONT CAMERA IMAGE SIG-
NAL
No-signal status of front camera image signal is
continued for 500 ms or more while ignition
switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.
Camera image is not displayed (Gray screen
display).
U111D
SIDE CAMERA LH IMAGE SIG-
NAL
No-signal status of side camera LH image sig-
nal is continued for 500 ms or more while igni-
tion switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.
Camera image is not displayed (Gray screen
display).
U1232
ST ANGLE SEN CALIB
Neutral position adjustment of steering angle
sensor is performed. NG signal from steering
angle sensor is received.
• MOD (Moving Object Detection) function is
stopped.
• Predicted course line is not displayed.
U1304
CAMERA IMAGE CALIB
• When camera calibration is incomplete.
• When camera information in around view
monitor control unit and information read
from camera are not the same.
NOTE:
Current malfunction is displayed only and is not
saved.
Unmatched icon
display (red) is displayed
(applicable for unmatched camera only).
U1305
CONFIG UNFINISH
The vehicle setting of around view monitor con-
trol unit is incomplete.
NOTE:
Current malfunction is displayed only and is not
saved.
Operation is according to the vehicle setting
value as default value.
Other
When around view monitor control unit is not
normal.
Switch to camera screen is not allowed.
DTC
Display contents of CONSULT
Malfunction detection condition
Fail-safe condition
AV
DIAGNOSIS SYSTEM (NAVI CONTROL UNIT)
AV-77
< SYSTEM DESCRIPTION >
[AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (NAVI CONTROL UNIT)
On Board Diagnosis Function
INFOID:0000000012202498
ON BOARD DIAGNOSIS ITEM
Description
• On-board diagnosis is performed in service test mode.
• On-board diagnosis checks if the system operates normally.
On Board Diagnosis Item
Service test mode
Mode
Item
Content
Service version
—
The version data of the parts is shown
displayed.
Service radio
FM monitor
—
The Change Mediator monitors the dy-
namic values of the current tuner. If the
band is switched within the radio moni-
tor context, the active monitor is
switched as well.
AM monitor
—
SXM monitor
—
The version data is displayed.
SXM functions
• Clear XM Chipset NVM
• Reset all XM settings
• XM CBM debug mode ON/OFF
• External Diag mode ON/OFF
The current system status is displayed.
Service configuration
Destination input while
driving
—
Destination input while driving can be
disabled.
CAUTION:
Once the setting is changed, the
original setting cannot be restored.
Touch Display Calibration
—
The function allows connection of the
position detection accuracy of the touch
panel.
Service system status
Running system status
• SD card slot access
• Power Supply
• Speed Signal
• Direction Signal
• Illumination Signal
• GPS Antenna
• GPS tracking
• Satellites visible
• Satellites tracked
• Microphone Current
• Steer. wheel key
• Radio Antenna
• SXM Antenna
• USB Device
• iPod
®
firmware ver
• BT status
The current system status is displayed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст