Nissan Juke F15. Manual — part 1196
STR-4
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000012201574
Commercial Service Tools
INFOID:0000000012201575
Tool number
(Kent-Moore No.)
Tool name
Description
—
(—) Model GR8-1200 NI
Multitasking battery and electrical di-
agnostic station
Tests batteries, starting and charging sys-
tems and charges batteries.
For operating instructions, refer to diagnos-
tic station instruction manual.
AWIIA1239ZZ
Tool name
Description
Power tool
Loosening bolts, nuts and screws
PIIB1407E
COMPONENT PARTS
STR-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000012201576
Component Description
INFOID:0000000012201577
1.
.
2.
Transmission range switch (CVT
models)
Refer to
SYSTEM : Component Parts Loca-
tion"
.
3.
BCM
Refer to
SYSTEM : Component Parts Loca-
tion"
.
4.
Starter motor
5.
Clutch interlock switch (M/T models)
A.
Engine
B.
Clutch pedal (M/T models)
: Vehicle front
JMBIA3036ZZ
Component part
Description
BCM
BCM controls the starter relay.
IPDM E/R
CPU inside IPDM E/R controls the starter control relay.
Starter motor
The starter motor plunger closes and the motor is supplied with
battery power, which in turn cranks the engine, when the “S” ter-
minal is supplied with electric power.
Transmission range switch (CVT models)
Transmission range switch supplies power to the starter relay and
starter control relay inside IPDM E/R when the selector lever is
shifted to the “P” or “N” position.
Clutch interlock switch (M/T models)
The switch turns ON and electric power is supplied to the starter
relay and starter control relay inside IPDM E/R when the clutch
pedal is depressed.
STR-6
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
System Diagram
INFOID:0000000012201578
*
1
: M/T models
*
2
: CVT models
System Description
INFOID:0000000012201579
CVT MODELS
• When selector lever is “P” or “N”, power is supplied to starter relay and starter control relay by transmission
range switch. And BCM and IPDM E/R (CPU) detect selector lever P/N condition by the inputted signal.
• When starter operating condition is satisfied, IPDM E/R turns starter control relay ON by starter control relay
control signal.
• When engine cranking condition is satisfied, BCM turns starter relay ON by starter relay control signal.
• Then battery power is supplied to starter motor (“S” terminal) through starter control relay and starter relay.
M/T MODELS
• When the clutch interlock switch is turned ON position (clutch pedal is depressed) power is supplied to
starter relay and starter control relay. And BCM and IPDM E/R (CPU) detect ignition switch position by the
inputted signal.
• When starter operating condition is satisfied, IPDM E/R turns starter control relay ON by starter control relay
control signal.
• When engine cranking condition is satisfied, BCM turns starter relay ON by starter relay control signal.
• Then battery power is supplied to starter motor (“S” terminal) through starter control relay and starter relay.
JMBIA3038GB
STARTING SYSTEM
STR-7
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
WIRING DIAGRAM
STARTING SYSTEM
Wiring Diagram (CVT Models)
INFOID:0000000012201580
JRBWD6988GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст