Nissan Juke F15. Manual — part 1352
V
T
L
- 1
4
< REMOVAL AND INSTALLATION >
BLOWER MOTOR
BLOWER MOTOR
Exploded View
INFOID:0000000012199152
*1: Manual air conditioning
*2: Automatic air conditioning
Removal and Installation
INFOID:0000000012199153
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Always work from the side of air bag module. Never work in front of it.
• Never use the air tools or the electric tools for servicing.
REMOVAL
1. Remove glove box assembly. Refer to
IP-13, "Removal and Installation"
2. Disconnect blower motor harness connector (1) and front pas-
senger air bag module harness connector (2).
3. Remove front passenger air bag module. Refer to
SR-18, "Removal and Installation"
1.
A/C unit assembly
2.
Blower fan resistor
*1
3.
Sub harness
*1
4.
Power transistor
*2
5.
Sub harness
*2
6.
Blower motor
JPIIA1549ZZ
JMIIA1044ZZ
BLOWER MOTOR
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
4. Press flange holding hook (A), and then turn blower motor (1)
clockwise.
5. Pull outside, and then remove blower motor.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the old mounting bolts after removal, replace with the new bolts.
• Never damage the harness while installing.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JPIIA1692ZZ
VTL-16
< REMOVAL AND INSTALLATION >
IN-CABIN MICROFILTER
IN-CABIN MICROFILTER
Exploded View
INFOID:0000000012199154
Removal and Installation
INFOID:0000000012199155
REMOVAL
1. Remove glove box assembly. Refer to
IP-13, "Removal and Installation"
2. Remove filter cover (1), and then remove in-cabin microfilter (2).
CAUTION:
If the filter is deformed/damaged when removing, replace it
with a new one. Deformed/damaged filter may deteriorate
the dust collecting performance.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
When installing, handle the filter with extreme care to avoid deforming/damaging.
Replacement
INFOID:0000000012199156
Replace In-cabin microfilter.
VTL-17, "In-cabin microfilter"
.
1.
A/C unit assembly
2.
In-cabin microfilter
3.
Filter cover
JPIIA1679ZZ
JPIIA1683ZZ
SERVICE DATA AND SPECIFICATIONS (SDS)
VTL-17
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
In-cabin microfilter
INFOID:0000000012199157
Replacement interval
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст