Nissan Juke F15. Manual — part 97
BR-48
< REMOVAL AND INSTALLATION >
FRONT DISC BRAKE
FRONT DISC BRAKE
BRAKE PAD
BRAKE PAD : Exploded View
INFOID:0000000012200297
EXCEPT NISMO RS
Molykote is a registered trademark of Dow Corning Corporation.
NISMO RS
1.
Cylinder body
2.
Inner shim
3.
Inner pad (with pad wear sensor)
4.
Pad retainer
5.
Torque member
6.
Outer pad
7.
Outer shim
8.
Outer shim cover
1: Apply MOLYKOTE
®
AS880N or silicone-based grease.
2: Apply MOLYKOTE
®
7439 or equivalent.
: N·m (kg-m, ft-lb)
JSFIA0641GB
1.
Cylinder body
2.
Inner shim cover
3.
Inner shim
4.
Inner pad (with pad wear sensor)
5.
Pad return spring
6.
Pad retainer
JSFIA2915GB
FRONT DISC BRAKE
BR-49
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
BR
N
O
P
Molykote is a registered trademark of Dow Corning Corporation.
BRAKE PAD : Removal and Installation
INFOID:0000000012200298
REMOVAL
Exsept NISMO RS
WARNING:
Since dust covering the front brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
CAUTION:
• Never depress the brake pedal while removing the brake pads because the piston may pop out.
• If the brake fluid or grease adheres to the disc rotor, quickly wipe it off.
1. Remove tires with power tool.
2. Remove lower sliding pin bolt.
3. Suspend the cylinder body with suitable wire so that the brake
hose will not stretch.
4. Remove the brake pads, shims, shim cover and pad retainers from the torque member.
CAUTION:
• Never deform the pad retainer (2) when removing the pad
retainer from the torque member (1).
• Never damage the piston boot.
• Never drop the brake pads, shims, and the shim covers.
• Remember each position of the removed brake pads.
5. Perform inspection after removal. Refer to
NISMO RS
7.
Torque member
8.
Outer pad
9.
Outer shim
10. Outer shim cover
1: Apply MOLYKOTE
®
AS880N or silicone-based grease.
2: Apply MOLYKOTE
®
7439 or equivalent.
: N·m (kg-m, ft-lb)
JPFIA0832ZZ
JPFIA0850ZZ
JPFIA0118ZZ
BR-50
< REMOVAL AND INSTALLATION >
FRONT DISC BRAKE
WARNING:
Since dust covering the front brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
CAUTION:
• Never depress the brake pedal while removing the brake pads because the piston may pop out.
• If the brake fluid or grease adheres to the disc rotor, quickly wipe it off.
1. Remove tires with power tool.
2. Remove lower sliding pin bolt.
3. Suspend the cylinder body with suitable wire so that the brake
hose will not stretch.
4. Remove the pad return springs, brake pads, shims, shim covers and pad retainers from the torque mem-
ber.
CAUTION:
• Never deform the pad retainer (2) when removing the pad
retainer from the torque member (1).
• Never deform the pad return spring when removing the
pad return spring from the brake pad.
• Never damage the piston boot.
• Never drop the brake pads, shims, and the shim covers.
• Remember each position of the removed brake pads.
5. Perform inspection after removal. Refer to
INSTALLATION
Except NISMO RS
WARNING:
Since dust covering the front brake has an affect on human body, the dust must be removed with a
dust collector. Never splatter the dust with an air blow gun.
CAUTION:
• Never depress the brake pedal while removing the brake pads or the cylinder body because the pis-
ton may pop out.
• If the brake fluid or grease adheres to the disc rotor, quickly wipe it off.
JPFIA0832ZZ
JPFIA0850ZZ
JPFIA0118ZZ
FRONT DISC BRAKE
BR-51
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
BR
N
O
P
1. Install the pad retainers (1) to the torque member (2) if the pad
retainers has been removed.
CAUTION:
• Securely assemble the pad retainers so that it will not be
lifted up from the torque member.
• Never deform the pad retainers.
2. Apply MOLYKOTE
®
AS880N or silicone-based grease to the
mating faces (A) between the inner pad and the inner shim, and
install the inner shims to the inner pad.
CAUTION:
Always replace the shim together when replacing the brake
pad.
Molykote is a registered trademark of Dow Corning Corporation.
3. Apply MOLYKOTE
®
7439 or equivalent to the mating faces (B)
between the inner pad and the pad retainers.
Molykote is a registered trademark of Dow Corning Corporation.
4. Apply MOLYKOTE
®
AS880N or silicone-based grease to the
mating faces (A) between the outer shim cover and the outer
shim, and install the outer shim and outer shim cover to the
outer pad.
CAUTION:
Always replace the shim together with the shim cover when
replacing the brake pad.
Molykote is a registered trademark of Dow Corning Corporation.
5. Apply MOLYKOTE
®
7439 or equivalent to the mating faces (B)
between the outer pad and the pad retainers.
Molykote is a registered trademark of Dow Corning Corporation.
6. Install the brake pads to the torque member.
CAUTION:
• Both inner and outer pads have a pad return system on
the pad retainer. Install pad return lever (1) securely to pad
retainer (2).
• Never deform the pad retainers.
7. Install cylinder body to torque member.
CAUTION:
• Never damage the piston boot.
• When replacing brake pad with new one, check a brake
fluid level in the reservoir tank because brake fluid
returns to master cylinder reservoir tank when pressing
piston in.
NOTE:
Use a disc brake piston tool to easily press piston.
PFIA0763J
JSFIA0484ZZ
JSFIA0642ZZ
JPFIA0027ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст