Nissan Juke F15. Manual — part 255
AWD CONTROL MODULE
DLN-25
< ECU DIAGNOSIS INFORMATION >
[TRANSFER: TY21B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
ECU DIAGNOSIS INFORMATION
AWD CONTROL MODULE
Reference Value
INFOID:0000000012199368
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor item
Condition
Value/Status
SWITCH 1
AWD mode switch: 2WD
On
AWD mode switch: AWD-V or AWD
Off
SWITCH 2
AWD mode switch: AWD-V or AWD
On
AWD mode switch: 2WD
Off
SWITCH 3
AWD mode switch: AWD
On
AWD mode switch: 2WD or AWD-V
Off
IGN SW
Ignition switch: ON
On
Ignition switch: OFF
Off
WARNING LAMP
AWD warning lamp: ON
On
AWD warning lamp: OFF
Off
R POSITION SW
CVT shift selector: R
On
CVT shift selector: Except R
Off
ABS OPERATION SIG
ABS is operating
On
ABS is not operating
Off
VDC OPERATION SIG
VDC is operating
On
VDC is not operating
Off
TCS OPERATION SIG
TCS is operating
On
TCS is not operating
Off
PKB SW
Parking brake is operated
On
Parking brake is not operated
Off
STOP LAMP SW
Brake pedal is depressed
On
Brake pedal is released
Off
4WD MODE SW
AWD mode switch: 2WD
2WD
AWD mode switch: AWD-V or AWD
4WD-A
ACTUATOR RELAY
Engine stopped (Ignition switch: ON)
Off
Engine running
On
OPERATION MODE
2WD mode
2WD
AWD-V mode
4WD-V
AWD mode
4WD-A
INDICATOR
AWD mode indicator (AWD-V): OFF
AWD mode indicator (AWD): OFF
2WD
AWD mode indicator (AWD-V): ON
AWD mode indicator (AWD): OFF
4WD-V
AWD mode indicator (AWD-V): ON
AWD mode indicator (AWD): ON
4WD-A
DRIVE MODE
Except AWD mode
1
AWD mode
2
DLN-26
< ECU DIAGNOSIS INFORMATION >
[TRANSFER: TY21B]
AWD CONTROL MODULE
TORQU DISTR RR LH
The number of bars of torque distribution indicator (rear LH): 0
OFF
The number of bars of torque distribution indicator (rear LH): 1
1
The number of bars of torque distribution indicator (rear LH): 2
1-2
The number of bars of torque distribution indicator (rear LH): 3
1-3
The number of bars of torque distribution indicator (rear LH): 4
1-4
TORQU DISTR RR RH
The number of bars of torque distribution indicator (rear RH): 0
OFF
The number of bars of torque distribution indicator (rear RH): 1
1
The number of bars of torque distribution indicator (rear RH): 2
1-2
The number of bars of torque distribution indicator (rear RH): 3
1-3
The number of bars of torque distribution indicator (rear RH): 4
1-4
TORQU IND FRONT
The number of bars of torque distribution indicator (front): 0
OFF
The number of bars of torque distribution indicator (front): 1
1
The number of bars of torque distribution indicator (front): 2
1-2
The number of bars of torque distribution indicator (front): 3
1-3
The number of bars of torque distribution indicator (front): 4
1-4
TEMP SEN LEFT
Always
0 V
TEMP SEN RIGHT
Always
0 V
CONT MODUL VOLT
Always
11 – 13 V
SOLENOID VOLT
Always
11 – 13 V
TRGT SOL CRNT LH
Vehicle stopped
0.00 A
Vehicle starting
(Straight-ahead start on a dry road with accelerator angle 25%)
NOTE:
Confirm accelerator angle in monitor item “THRTL POS SEN”.
Approx. 1.00 A
SOLENOID CRNT LH
Vehicle stopped
0.00 A
Vehicle starting
(Straight-ahead start on a dry road with accelerator angle 25%)
NOTE:
Confirm accelerator angle in monitor item “THRTL POS SEN”.
Approx. 1.00 A
TRGT SOL CRNT RH
Vehicle stopped
0.00 A
Vehicle starting
(Straight-ahead start on a dry road with accelerator angle 25%)
NOTE:
Confirm accelerator angle in monitor item “THRTL POS SEN”.
Approx. 1.00 A
SOLENOID CRNT RH
Vehicle stopped
0.00 A
Vehicle starting
(Straight-ahead start on a dry road with accelerator angle 25%)
NOTE:
Confirm accelerator angle in monitor item “THRTL POS SEN”.
Approx. 1.00 A
COMPR VHCL SPEED
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
VHCL/S SEN-FR
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
Monitor item
Condition
Value/Status
AWD CONTROL MODULE
DLN-27
< ECU DIAGNOSIS INFORMATION >
[TRANSFER: TY21B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
TERMINAL LAYOUT
PHYSICAL VALUES
VHCL/S SEN-RR
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
THRTL POS SEN
When depressing accelerator pedal
(Value rises gradually in response to accelerator pedal position)
0 - 100%
SLCT LVR POSI
Engine running
CVT shift selector: Manual
mode
1ST
2ND
3RD
4TH
5TH
6TH
7TH
8TH
CVT shift selector: R
REVERSE
CVT shift selector: N or P
N/P
CVT shift selector: D
D
TRGT DRIVE TORQU
Request from AWD control module to ECM.
0 - 507 Nm
No request from AWD control module to ECM.
508 Nm
RQST DRIVE TORQU
Request from ABS actuator and electric unit (control unit) to
AWD control module.
0 - 1274 Nm
No request from ABS actuator and electric unit (control unit) to
AWD control module.
1275 Nm
WHEEL SPD SEN FR
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
WHEEL SPD SEN FL
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
WHEEL SPD SEN RR
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
WHEEL SPD SEN RL
Vehicle stopped
0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition.
Approx. equal to the indication on
speedometer (inside of
±10%)
Monitor item
Condition
Value/Status
JSDIA2078ZZ
DLN-28
< ECU DIAGNOSIS INFORMATION >
[TRANSFER: TY21B]
AWD CONTROL MODULE
*: The values are changed by throttle opening and engine speed.
CAUTION:
When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any con-
nector terminals.
Fail-safe
INFOID:0000000012199369
When a system malfunction occurs, the AWD warning lamp turns ON and the AWD control becomes 2WD
state.
Terminal No.
(Wire color)
Description
Condition
Value (Approx.)
+
-
Signal name
Input/
Output
1
(GR)
Ground
Battery power supply
(AWD control module)
Input
Always
11 - 13 V
3
(LG)
Ground Ignition power supply
Input
Ignition switch: ON
11 - 13 V
Ignition switch: OFF
0 V
4
(L)
—
CAN-H
Input/
Output
—
—
5
(P)
—
CAN-L
Input/
Output
—
—
9
(W)
Ground
AWD mode switch (Except
2WD)
Input
Ignition switch: ON
AWD mode switch: 2WD
4.5 - 5 V
AWD mode switch: AWD-V or
AWD
0 V
10
(B)
Ground Ground
—
Always
0 V
11
(B)
Ground Ground
—
Always
0 V
12
(Y)
Ground
Battery power supply
(AWD solenoid)
Input
Always
11 - 13 V
13
(G)
Ground AWD mode switch (2WD)
Input
Ignition switch: ON
AWD mode switch: 2WD
0 V
AWD mode switch: AWD-V or
AWD
4.5 - 5 V
21
(Y)
Ground AWD mode switch (AWD)
Input
Ignition switch: ON
AWD mode switch: 2WD or
AWD-V
4.5 - 5 V
AWD mode switch: AWD
0 V
23
(R)
Ground
AWD solenoid (left) power
supply
Output
Engine speed: At idle
0 V
Engine speed: 3,000 or more constant
2.5 V
*
24
(V)
Ground AWD solenoid (left) ground
Input
Always
1.5 V or less
25
(W)
Ground
AWD solenoid (right) pow-
er supply
Output
Engine speed: At idle
0 V
Engine speed: 3,000 or more constant
2.5 V
*
26
(Y)
Ground
AWD solenoid (right)
ground
Input
Always
1.5 V or less
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст