Nissan Primera P12. Manual — part 192
WARNING LAMPS
DI-97
C
D
E
F
G
H
I
J
L
M
A
B
DI
MKWA1038E
DI-98
WARNING LAMPS
Electrical Components Inspection
EKS009CP
OIL PRESSURE SWITCH CHECK
Check the continuity between the terminals of oil pressure switch
and body ground.
Oil pressure
kPa (bar,
kg/cm
2
, psi)
Continuity
Engine running
More than 10 - 20 (0.10 -
0.20, 0.1 - 0.2, 1 - 3)
No
Engine not running
Less than 10 - 20 (0.10 -
0.20, 0.1 - 0.2, 1 - 3)
Yes
MEL425F
A/T INDICATOR
DI-99
C
D
E
F
G
H
I
J
L
M
A
B
DI
A/T INDICATOR
PFP:24814
Wiring Diagram — AT/IND —
EKS009CQ
MKWA1039E
DI-100
A/T INDICATOR
SYMPTOM CHART
1.
TCM CONTROL UNIT SYSTEM INSPECTION
Perform TCM self-diagnosis. Refer to AT section in P12 ESM (SM2E00-1P12E0E).
OK or NG
OK
>> GO TO 2.
NG
>> GO TO TCM trouble diagnosis.
2.
SELF-DIAGNOSIS INSPECTION
Perform combination meter self-diagnosis mode. Refer to
DI-14, "Combination Meter Self-Diagnosis"
(LHD
models) or
DI-37, "Combination Meter Self-Diagnosis"
(RHD models).
OK or NG
OK
>> A/T indicator is OK.
NG
>> Replace combination meter control unit assembly.
Symptom
Possible cause
A/T indicator lamp is malfunc-
tioning.
All the lamps inactive
Partially inactive
A/T indicator does not illuminate. Shown the below.
Segment is missing
●
Combination meter self-diagnosis mode. Refer to
"Combination Meter Self-Diagnosis"
(LHD models) or
37, "Combination Meter Self-Diagnosis"
(RHD models).
●
Check the connector conditions in combination meter.
If the above system is OK, replace unified meter control unit.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст