Nissan Primera P12. Manual — part 51
NAVIGATION SYSTEM
AV-47
C
D
E
F
G
H
I
J
L
M
A
B
AV
“NEARBY DISPLAY ICONS” MODE
●
Select an icon to display on the map screen.
“SAVE CURRENT LOCATION” MODE
●
The current vehicle location can be registered in “Address
Book”.
NOTE:
“Address Book” can store 50 items max.
“EDIT ADDRESS BOOK” MODE
●
Edit the items registered in Address Book.
“CLEAR MEMORY” MODE
●
To delete all the stored places in “Address Book”, “Avoid Area”
and “Previous Dest”, select “Yes”.
SKIA1394E
SKIA1388E
SKIA0560E
SKIA0566E
AV-48
NAVIGATION SYSTEM
“AUTO RE-ROUTE” MODE
●
To Perform the auto re-route of route, select “ON”.
●
Not to Perform the auto re-route of route, select “OFF”.
“QUICK STOP CUSTOMER SETTINGS” MODE
●
Select a category for the “Quick Stop” menu.
“SET AVERAGE SPEED FOR ESTIMATED JOURNEY TIME” MODE
●
Set the average vehicle speed to calibrate the estimated journey
time for the destination.
●
Set three items; “Freeway”, “Main Roads”, and “Ordinary
Roads”.
“GPS INFORMATION” MODE
●
Latitude, longitude, altitude, astrometric state, and satellite loca-
tion are displayed as GPS information.
NOTE:
Altitude is displayed only in three-dimensional status.
SKIA0558E
SKIA1389E
SKIA1397E
SKIA0555E
NAVIGATION SYSTEM
AV-49
C
D
E
F
G
H
I
J
L
M
A
B
AV
“TRACKING” MODE
●
To leave no trail on the map, select “Off”.
●
To leave a trail in the map, select “On”.
NOTE:
When a trail display is turned OFF, trail data is erased from the mem-
ory.
“ADJUST CURRENT LOCATION” MODE
1.
Select an icon “right” or “left” to calibrate the heading direction.
(Arrow marks will rotate corresponding to the calibration key.)
2.
Select “Set”. Then the vehicle mark will be matched to the arrow
mark.
GUIDE VOLUME SETTING
Description
Following voice guidance setting can be changed.
Activation/Deactivation Setting
●
The voice prompt can be turned on/off by pressing the “Guidance Volume” button.
Voice Volume Setting
●
Volume of the voice can be controlled by bending the joystick to left/right.
SKIA0559E
SKIA1395E
SKIA1396E
SKIA1400E
AV-50
NAVIGATION SYSTEM
NATS NAVI LINK
Description
The link with the NATS IMMU implies that the AV and NAVI control unit can basically only be operated if con-
nected to the matching NATS IMMU to which the AV and NAVI control unit was initially fitted on the production
line.
The Navigation system does not operate because it is judged that the code collation with NATS IMMU is illegal
when the control unit of other cars is installed.
Precautions for AV and NAVI Control Unit Replacement
EKS009JJ
●
When replacing the AV and NAVI control unit, eject the map DVD-ROM before disconnecting the battery.
●
The AV and NAVI control unit has the following information stored in its memory. Record the memory con-
tents before replacing the control unit, and input them in the new unit as necessary.
NOTE:
Only removing the battery does not erase the memory.
<RADIO>
●
Preset frequency
●
Area for indicating station, selection of overlapped stations
<CD>
●
Program status
<Sound quality>
●
Volume balance memory set values
●
Equalizer memory set values
<Image quality>
●
Brightness of light when ON/OFF
●
Dimming switching
●
Display color switching
<Navigation mode>
●
Latest status (map screen/bird view®, reduced scale, rotation angle of
map screen, route guide ON/OFF, track ON/OFF, etc.)
●
Current position
●
Destination, passing point 1 - 5
●
Registered places, their names, etc.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст