Nissan Primera P12. Manual — part 107
THEFT WARNING SYSTEM
BL-137
C
D
E
F
G
H
J
K
L
M
A
B
BL
OPTION CONNECTOR — PREWIRE —
MKWA0696E
BL-138
THEFT WARNING SYSTEM
CONSULT- II Inspection Procedure
EIS005IU
1.
Turn ignition switch “OFF”.
2.
Connect CONSULT-II to the data link connector.
3.
Turn ignition switch “ON”.
4.
Touch “START(NISSAN BASED VHCL)”.
5.
Touch “SMART ENTRANCE”.
6.
Touch “THEFT WARNING”.
SIIA1645E
MBIB0233E
SIIA1678E
SIIA1679E
THEFT WARNING SYSTEM
BL-139
C
D
E
F
G
H
J
K
L
M
A
B
BL
7.
Select diagnosis mode.
“DATA MONITOR” and “WORK SUPPORT” are available.
CONSULT- II Application Items
EIS005IV
DATA MONITOR
WORK SUPPORT
Trouble Diagnoses
EIS005IW
First perform the “SELF-DIAG RESULTS” in “SMART ENTRANCE” with CONSULT-II, when perform the each
trouble diagnosis. Refer to
BCS-13, "CONSULT-II INSPECTION PROCEDURE"
.
SIIA1677E
Monitored Item
Description
IGNITION SW
Indicates [ON/OFF] condition of ignition switch in ON position.
RR LH DOOR SW
Indicates [ON/OFF] condition of rear door switch LH.
RR RH DOOR SW
Indicates [ON/OFF] condition of rear door switch RH.
AS DOOR SW
Indicates [ON/OFF] condition of front door switch (passenger side).
DR DOOR SW
Indicates [ON\OFF] condition of front door switch (driver side).
TRUNK OPEN SW
Indicates [ON/OFF] condition of trunk room lamp switch (sedan) or back door switch (wagon).
HOOD OPEN SW
Indicates [ON/OFF] condition of hood switch.
CDL LOCK SW
Indicates [ON/OFF] condition of lock signal from door lock/ unlock switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of unlock signal from door lock/ unlock switch.
DOOR SW - ALL
Indicates [ON/OFF] condition of door switch (All).
RKE LOCK
Indicates [ON/OFF] condition of lock signal from remote controller.
RKE UNLOCK
Indicates [ON/OFF] condition of unlock signal from remote controller.
RKE SEL UNLOCK
Indicates [ON/OFF] condition of select unlock signal from remote controller.
RKE TRUNK REL
Indicates [ON/OFF] condition of trunk (sedan) or back door (wagon) open signal from trunk or
back door release switch.
Test Item
Description
THEFT WARNING
This mode can be setting theft warning function.
LASTEST ALARM TRIGGER
This mode can be displayed last alarm trigger condition.
PRE- ARM FAST FLASH
This mode can be changed alarm operation.
SIREN FITTED
This mode can be setting siren condition.
PUREVIOUS ALARM TRIGGER
This mode can be displayed previous alarm trigger condition.
OLDEST ALARM TRIGGER
This mode can be displayed oldest alarm trigger condition.
BL-140
THEFT WARNING SYSTEM
PRELIMINARY CHECK
The system operation is canceled by turning ignition switch to “ACC” at any step between START and ARMED
in the following flow chart.
After performing preliminary check, go to symptom chart. Refer to
SIIA1648E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст