Nissan Primera P12. Manual — part 198
WARNING CHIME
DI-121
C
D
E
F
G
H
I
J
L
M
A
B
DI
11.
CHECK SEAT BELT BUCKLE SWITCH
Check continuity between seat belt buckle switch (passenger side)
connector B111 terminals 1 and 2.
OK or NG
OK
>> INSPECTION END.
NG
>> Replace seat belt buckle switch (passenger side)
When seat belt
fastened:
Continuity should not exist.
When seat belt
unfastened:
Continuity should exist.
MKIB0022E
DI-122
CLOCK
CLOCK
PFP:25820
Wiring Diagram — CLOCK —
EKS009D2
MKWA1041E
REAR VIEW MONITOR
DI-123
C
D
E
F
G
H
I
J
L
M
A
B
DI
REAR VIEW MONITOR
PFP:28260
System Description
EKS009D3
●
The rear view monitor is equipped to check the rearward of the vehicle with display when the selector
lever is in R position.
●
The lines of vehicle sides and the distance from the rear end of the vehicle are provided on display as a
guide. It allows the driver to know the distance between the vehicle and a rearward object, and the width
of the vehicle much easier.
POWER SUPPLY AND GROUND
Power is supplied at all time
●
through 15 A fuse (No.33, located in fuse and fusible link box)
●
to rear view camera control unit terminal 7.
When ignition switch is ACC or ON position, power is supplied
●
through 10 A fuse [No.1, located in fuse block (J/B)]
●
to rear view camera control unit terminal 6.
When ignition switch is ON or START position, power is supplied
●
through 10 A fuse [NO.30, located in fuse block (J/B)]
●
to back
−
up lamp switch terminal 1 (M/T models) or
●
to park/neutral position switch terminal 3 (CVT or A/T models).
Ground is supplied
LHD models
●
to rear view camera control unit terminal 16
●
through body ground B120, and
●
to rear view camera terminal 3
●
through body ground B120 (sedan models), B17, B24 and D94 (wagon models) or B17,B24 and B55
(hatch back models).
RHD models
●
to rear view camera control unit terminal 16
●
through body ground B17 and B24 (sedan models), B17, B24 and D94 (wagon models) or B17, B24 and
B55 (hatch back models), and
●
to rear view camera terminal 3
●
through body ground B17 and B24 (sedan models), B17, B24 and D94 (wagon models) or B17, B24 and
B55 (hatch back models).
REAR VIEW CAMERA OPERATION
When A/T selector lever is reverse position
●
through back
−
up lamp switch terminal 2 (M/T models) or
●
through park/neutral position switch terminal 8 (CVT or A/T models)
●
to rear view camera control unit terminal 14, and
●
to AV and NAVI control unit terminal 32 (with navigation system) or
●
to display unit terminal 7 (without navigation system).
Then, camera ON signal is sent
●
through rear view camera control unit terminal 5
●
to rear view camera terminal 4.
An image taken by rear view camera is sent
●
through rear view camera terminal 2
●
to rear view camera control unit terminal 3.
Then an image is sent
●
through rear view camera control unit terminal 2 and 13
●
to display terminal 9 and 10 (with navigation system) or
●
to display unit terminal 23 and 24 (without navigation system).
DI-124
REAR VIEW MONITOR
An image of rear view will be projected on the display.
Rear View Camera Guide Line (With Navigation System)
●
from AV and NAVI control unit terminal 37
●
to rear view camera control unit terminal 15.
Rear view guideline will be projected on the display.
Component Location
EKS009D4
MKIB0250E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст