Nissan Primera P12. Manual — part 544
LAN-88
[CAN]
CAN SYSTEM (TYPE 26)
CAN SYSTEM (TYPE 26)
PFP:23710
System Description
EKS00B6Q
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector Location
EKS00B6R
MKIB0670E
CAN SYSTEM (TYPE 26)
LAN-89
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Wiring Diagram — CAN —
EKS00B6S
MKWA1731E
LAN-90
[CAN]
CAN SYSTEM (TYPE 26)
MKWA1732E
CAN SYSTEM (TYPE 26)
LAN-91
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Work Flow
EKS00B6T
1.
When there are no indications of “ENGINE” display of CONSULT-II, print the “SELECT SYSTEM”.
2.
Print all the data of “SELF-DIAG RESULTS” and “DATA MONITOR” for “ENGINE”, “ABS” and “SMART
ENTRANCE”, displayed on CONSULT-II. Refer to the following:
●
EC-F9Q-136, “CAN Communication” for “ENGINE”
●
for “ABS”
●
BCS-23, "CAN Communication Line Check"
for “SMART ENTRANCE”
3.
Attach the printed sheet of “SELF-DIAG RESULTS” and “DATA MONITOR” onto the check sheet. Refer to
4.
Based on the data monitor results, put “v” marks onto the items with “UNKWN” or “NG” in the check sheet
table. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” for the diagnosed control unit, replace the control unit.
5.
According to the check sheet results (example), start inspection. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст