Nissan Primera P12. Manual — part 573
LT-2
CONNECTOR LOCATION . . . . . . . . .. 37
Wiring Diagram - H/AIM - . . . . . . . . . ... 38
CONSULT-II . . . . . . . . . . . . . . . 40
CONSULT-II INSPECTION PROCEDURE . . .. 40
CONSULT-II DIAGNOSTIC TEST MODE FUNC-
TION . . . . . . . . . . . . . . . . . 40
INITIALIZATION . . . . . . . . . . . . .. 41
SELF-DIAGNOSTIC RESULTS ITEM CHART . 41
Check Height Sensor Power Supply and Ground
Circuit . . . . . . . . . . . . . . . . . . 42
Check Lighting Switch Circuit . . . . . . . . . 42
Check Speed Signal Circuit . . . . . . . . . 43
Check Headlamp Aiming Motor . . . . . . . .. 44
Removal and installation . . . . . . . . . . . 45
TURN SIGNAL AND HAZARD WARNING LAMPS... 46
System Description . . . . . . . . . . . . . 46
TURN SIGNAL OPERATION . . . . . . . ... 46
HAZARD LAMP OPERATION . . . . . . . . 47
TURNSIGNAL(HAZARD)SOUNDOPERATION
MULTI-REMOTE CONTROL SYSTEM OPERA-
TION . . . . . . . . . . . . . . . . . 48
Schematic . . . . . . . . . . . . . . . ... 49
Wiring Diagram — TURN — . . . . . . . . ... 50
Terminal and Reference Valve for Smart Entrance
Control Unit . . . . . . . . . . . . . . . . 53
Turn Signal And Hazard Warning Lamp Do Not
Operate . . . . . . . . . . . . . . . . ... 53
Turn Signal Lamps Do Not Operate But Hazard
Warning Lamp Operates . . . . . . . . . . . 54
Hazard Warning Lamps Do Not Operate But Turn
Signal Lamp Operate . . . . . . . . . . . .. 55
Turn Signal Lamp LH Does Not Operate . . . . 56
Turn Signal Lamp RH Does Not Operate . . . ... 57
RH and LH Turn Indicators Do Not Operate . . ... 58
Bulb Replacement . . . . . . . . . . . . .. 59
LIGHTING AND TURN SIGNAL SWITCH . . . . 60
Removal and Installation . . . . . . . . . . 60
Switch Circuit Inspection . . . . . . . . . . 60
HAZARD SWITCH . . . . . . . . . . . . . 61
Removal and Installation . . . . . . . . . . 61
REMOVAL . . . . . . . . . . . . . . ... 61
INSTALLATION . . . . . . . . . . . . . 61
STOP LAMP . . . . . . . . . . . . . . . .. 62
Wiring Diagram — STOP/L — . . . . . . . . 62
Bulb Replacement . . . . . . . . . . . . .. 65
STOP LAMP . . . . . . . . . . . . . . 65
Removal and Installation . . . . . . . . . . 65
STOP LAMP . . . . . . . . . . . . . . 65
BACK-UP LAMP . . . . . . . . . . . . . ... 66
Wiring Diagram — BACK/L — . . . . . . . . 66
Bulb Replacement (Sedan and Hatch Back) . . .. 69
Bulb Replacement (Wagon) . . . . . . . . . 69
PARKING, LICENSE PLATE AND TAIL LAMPS . ..70
Wiring Diagram - TAIL/L -/LHD MODELS . . . ...70
Wiring Diagram - TAIL/L -/RHD MODELS . . . ..74
Bulb Replacement . . . . . . . . . . . . ...78
PARKING AND TAIL LAMPS . . . . . . . ...78
LICENSE PLATE LAMP . . . . . . . . . ...78
Removal and Installation . . . . . . . . . . .78
PARKING AND TAIL LAMPS . . . . . . . ...78
LICENSE PLATE LAMP . . . . . . . . . ...78
FRONT FOG LAMP . . . . . . . . . . . . ...80
System Description . . . . . . . . . . . . .80
DESCRIPTION . . . . . . . . . . . . . 80
FOG LAMP OPERATION . . . . . . . . . 80
Wiring Diagram — F/FOG — . . . . . . . . ..81
Aiming Adjustment . . . . . . . . . . . . ..82
Bulb Replacement . . . . . . . . . . . . ...82
Removal and Installation . . . . . . . . . . .82
REMOVAL . . . . . . . . . . . . . . . 82
INSTALLATION . . . . . . . . . . . . . 83
REAR FOG LAMP . . . . . . . . . . . . . .84
Wiring Diagram — R/FOG — /Without Front Fog
Lamp . . . . . . . . . . . . . . . . . ...84
Wiring Diagram — R/FOG — /With Front Fog Lamp...86
Bulb Replacement (Sedan and Hatchback) . . . 88
Bulb Replacement (Wagon) . . . . . . . . . 88
Removal and Installation . . . . . . . . . . .88
REMOVAL (SEDAN AND HATCHBACK) . . . 88
INSTALLATION (SEDAN AND HATCHBACK) . .88
CLEARANCE LAMP/TAIL LAMP . . . . . . . .89
HIGH-MOUNTED STOP LAMP . . . . . . . . .90
Bulb Replacement . . . . . . . . . . . . ...90
Removal and Installation . . . . . . . . . . .90
HIGH-MOUNTED STOP LAMP (SEDAN) . . ...90
HIGH-MOUNTED STOP LAMP (WAGON) . . ..90
HIGH-MOUNTED STOP LAMP (HATCHBACK)...91
REAR COMBINATION LAMP . . . . . . . . ...92
Bulb Replacement (Sedan) . . . . . . . . . .92
Bulb Replacement (Wagon) . . . . . . . . . 92
Bulb Replacement (Hatchback) . . . . . . . ..92
Removal and Installation . . . . . . . . . . .93
COMBINATION SWITCH . . . . . . . . . . ..94
Removal and Installation . . . . . . . . . . .94
Switch Circuit Inspection . . . . . . . . . . .95
ILLUMINATION . . . . . . . . . . . . . . ..97
System Description . . . . . . . . . . . . .97
Schematic/Except for YD100kw, F9Q Engine Mod-
LT-3
C
D
E
F
G
H
I
J
L
M
A
B
LT
els . . . . . . . . . . . . . . . . . . ... 98
Wiring Diagram — ILL —/Except for YD100kw, F9Q
Engine Models . . . . . . . . . . . . . ... 99
Schematic/YD100kw, F9Q Engine Models . . .. 104
Wiring Diagram — ILL —/YD100kw, F9Q Engine
Models . . . . . . . . . . . . . . . . .. 105
INTERIOR ROOM LAMP . . . . . . . . . . .110
System Description . . . . . . . . . . . ...110
SWITCH OPERATION . . . . . . . . . ...110
INTERIOR ROOM LAMP TIMER OPERATION..110
ON-OFF CONTROL . . . . . . . . . . ... 111
Schematic . . . . . . . . . . . . . . . .112
Wiring Diagram — ROOM/L —/LHD MODELS . .113
Wiring Diagram — ROOM/L —/RHD MODELS . 116
Terminal and Reference Valve for Smart Entrance
Control Unit . . . . . . . . . . . . . . ...119
CONSULT-II Inspection Procedure . . . . . ...119
“ROOM LAMP” . . . . . . . . . . . . ...119
CONSULT-II Application Items . . . . . . . . 120
ROOM LAMP . . . . . . . . . . . . . 120
Interior Room Lamp Timer Does Not Operate . . 121
Interior Room Lamp Timer Does Not Cancel . ... 126
Bulb Replacement . . . . . . . . . . . . 129
Removal and Installation . . . . . . . . . .. 129
SPOT, VANITY MIRROR AND TRUNK (LUGGAGE)
ROOM LAMPS . . . . . . . . . . . . . . 130
Wiring Diagram — INT/L — . . . . . . . . .. 130
Bulb Replacement . . . . . . . . . . . . 132
Removal and Installation . . . . . . . . . .. 132
SPOT LAMP . . . . . . . . . . . . . .. 132
TRUNK ROOM LAMP . . . . . . . . . ... 132
LUGGAGE ROOM LAMP . . . . . . . . .. 133
CAN COMMUNICATION . . . . . . . . . . . 134
System Description . . . . . . . . . . . ... 134
CAN Communication Unit . . . . . . . . . . 134
TYPE 1/TYPE 8 . . . . . . . . . . . . . 135
TYPE 2/TYPE 9 . . . . . . . . . . . . . 137
TYPE 3/TYPE 10 . . . . . . . . . . . ... 138
TYPE 4/TYPE 11 . . . . . . . . . . . ... 140
TYPE 5,TYPE 17/TYPE 12,TYPE 20 . . . . 141
TYPE 6,TYPE 7/TYPE 13,TYPE 14 . . . . .. 142
TYPE 15/TYPE 18 . . . . . . . . . . . . 143
TYPE 16/TYPE 19 . . . . . . . . . . . . 145
LT-4
PRECAUTION
PRECAUTION
PFP:00011
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER”
EKS009LJ
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
●
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
●
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
●
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precaution
EKS009LK
●
Do not touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Do not
touch bulb by hand while it is lit or right after being turned off. Burning may result.
●
Do not leave bulb out of headlamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of the headlamp. When replacing the bulb, be sure to replace it with a new one.
●
Adjust aiming by tightening aiming screw. (To adjust it toward loosening side, first loosen adjusting screw,
and then make adjustment by tightening.)
●
To remove soil or sealant of bulbs, do not use organic solvent (thinner, gasoline, etc.)
●
When replacing bulb, be sure to hold bulb socket and pull it out straight. If wiring harness of the bulb is
pulled at an angle, the bulb may be caught in the lamp, making it difficult to take out.
Wiring Diagrams and Trouble Diagnosis
EKS009LL
When you read wiring diagrams, refer to the following:
●
GI-14, "How to Read Wiring Diagrams"
in GI section
●
for power distribution circuit in PG section
When you perform trouble diagnosis, refer to the following:
●
GI-11, "HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES"
in GI section
●
GI-24, "How to Perform Efficient Diagnosis for an Electrical Incident"
in GI section
HEADLAMP -CONVENTIONAL TYPE-
LT-5
C
D
E
F
G
H
I
J
L
M
A
B
LT
HEADLAMP -CONVENTIONAL TYPE-
PFP:26010
System Description
EKS009LM
DESCRIPTION
The headlamps are controlled by the lighting switch which is built into the combination switch.
Power is supplied at all times
●
to lighting switch terminal 8
●
through 15A fuse (No. 41, located in the fuse and fusible link box), and
●
to lighting switch terminal 5
●
through 15A fuse (No. 42, located in the fuse and fusible link box).
LOW BEAM OPERATION
When the lighting switch is turned to the 2ND position and placed in LOW (“B”) position, power is supplied
●
from lighting switch terminal 10
●
to terminal 5 of the headlamp LH, and
●
from lighting switch terminal 7
●
to terminal 5 of the headlamp RH.
Terminal 3 of each headlamp supplies ground through body grounds E10 and E58.
With power and ground supplied, the low beams will illuminate.
HIGH BEAM OPERATION/FLASH-TO-PASS OPERATION
When the lighting switch is turned to the 2ND position and placed in HIGH (“A”) position or PASS (“C”) posi-
tion, power is supplied
●
from lighting switch terminal 9
●
to terminal 4 of headlamp LH, and
●
to combination meter terminal 20 (LHD models) or 7 (RHD models) for the HIGH BEAM indicator.
●
from lighting switch terminal 6
●
to terminal 4 of headlamp RH.
Ground is supplied to terminal 21 (LHD models) or 8 (RHD models) of the combination meter through body
grounds M16, M50 and M70.
Ground is supplied to terminal 3 of each headlamp through body grounds E10 and E58.
With power and ground supplied, the high beams and the HIGH BEAM indicator illuminate.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст