Nissan Juke (2016 year). Service Repair Manual — part 432
A/C AUTO AMP.
HAC-93
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
A/C AUTO AMP.
Removal and Installation
INFOID:0000000012200082
REMOVAL
1. Remove audio unit. Refer to the following.
• Refer to
AV-182, "Removal and Installation"
• Refer to
AV-182, "Removal and Installation"
. (With navigation)
2. Remove inside key antenna (instrument center). Refer to
DLK-170, "INSTRUMENT CENTER : Removal
3. Remove fixing screws (A), and then remove A/C auto amp..
INSTALLATION
Install in the reverse order of removal.
JMIIA0894ZZ
Revision: November 2015
2016 JUKE
HAC-94
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
AMBIENT SENSOR
AMBIENT SENSOR
Removal and Installation
INFOID:0000000012200083
REMOVAL
1. Remove bumper fascia assembly. Refer to
EXT-17, "Removal and Installation"
2. Disengage fixing pawl, and then remove ambient sensor (1).
3. Disconnect ambient sensor connector (2), and then remove
ambient sensor.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMIIA0895ZZ
Revision: November 2015
2016 JUKE
IN-VEHICLE SENSOR
HAC-95
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
IN-VEHICLE SENSOR
Removal and Installation
INFOID:0000000012200084
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-13, "Removal and Installation"
2. Remove fixing screw, and then remove in-vehicle sensor.
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
HAC-96
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
SUNLOAD SENSOR
SUNLOAD SENSOR
Removal and Installation
INFOID:0000000012200085
REMOVAL
1. Remove switch panel. Refer to
IP-13, "Removal and Installation"
.
2. Disconnect sunload sensor connector, and then remove sunload sensor.
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
INTAKE SENSOR
HAC-97
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
INTAKE SENSOR
Exploded View
INFOID:0000000012200086
HA-39, "Exploded View (Automatic Air Conditioning)"
.
Removal and Installation
INFOID:0000000012200087
REMOVAL
1. Remove evaporator assembly. Refer to
HA-46, "EVAPORATOR : Removal and Installation"
2. Remove intake sensor from evaporator.
INSTALLATION
Note the following items, and then install in the order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply the compressor oil to them when installing.
• Mark the mounting position of intake sensor bracket prior to removal so that the reinstalled sensor
can be located in the same position.
• Never rotate the bracket insertion part when removing and installing the intake sensor.
• Check for leakages when recharging refrigerant. Refer to
Revision: November 2015
2016 JUKE
HAC-98
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
REFRIGERANT PRESSURE SENSOR
REFRIGERANT PRESSURE SENSOR
Exploded View
INFOID:0000000012200088
.
Removal and Installation
INFOID:0000000012200089
REMOVAL
HA-38, "REFRIGERANT PRESSURE SENSOR : Removal and Installation"
INSTALLATION
Install in the reverse order of removal.
Revision: November 2015
2016 JUKE
POWER TRANSISTOR
HAC-99
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
POWER TRANSISTOR
Exploded View
INFOID:0000000012200090
• *1: Manual air conditioning
• *2: Automatic air conditioning
Removal and Installation
INFOID:0000000012200091
REMOVAL
1. Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2. Disconnect power transistor connector.
3. Slide power transistor (1) to the left while pressing lever (A), and
then remove power transistor.
INSTALLATION
Install in the reverse order of removal.
1.
A/C unit assembly
2.
Blower fan resistor*
1
3.
Sub harness*
1
4.
Power transistor*
2
5.
Sub harness*
2
6.
Blower motor
JPIIA1549ZZ
JPIIA1636ZZ
Revision: November 2015
2016 JUKE
HAC-100
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
DOOR MOTOR
DOOR MOTOR
Exploded View
INFOID:0000000012200092
LEFT SIDE
RIGHT SIDE
1.
A/C unit assembly
2.
Intake door lever
3.
Intake door motor
4.
Air mix door motor
5.
Upper air mix door rod
6.
Upper air mix door lever
7.
Lower air mix door lever
8.
Lower air mix door rod
JPIIA1557ZZ
Revision: November 2015
2016 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст