Nissan Pathfinder (2006 year). Manual — part 279
INSTRUMENT PANEL ASSEMBLY
IP-13
C
D
E
F
G
H
J
K
L
M
A
B
IP
2006 Pathfinder
CLUSTER LID D
Removal
1.
2.
Remove lower instrument panel LH. Refer to
IP-14, "LOWER INSTRUMENT PANEL LH"
.
3.
Remove lower instrument panel RH. Refer to
IP-15, "LOWER INSTRUMENT PANEL RH AND LOWER
.
4.
Remove cluster lid C. Refer to
IP-11, "CLUSTER LID C -WITHOUT NAVIGATION SYSTEM"
5.
Disconnect the electrical connectors and remove cluster lid D.
Installation
Installation is in the reverse order of removal.
WIIA1052E
1.
Cluster lid D
2.
Cluster lid D screws
IP-14
INSTRUMENT PANEL ASSEMBLY
2006 Pathfinder
LOWER INSTRUMENT PANEL LH
Removal
1.
Remove front pillar lower finisher. Refer to
EI-28, "FRONT PILLAR LOWER FINISHER"
.
2.
Remove lower instrument panel LH, using power tool.
3.
Pull rearward to release lower instrument panel LH.
4.
Disconnect lower instrument panel LH harness connectors.
Installation
Installation is in the reverse order of removal.
COMBINATION METER
Removal
1.
Disconnect the negative battery cable.
2.
Remove front pillar upper finisher. Refer to
EI-28, "FRONT PILLAR UPPER FINISHER"
3.
Remove lower instrument panel LH. Refer to
IP-14, "LOWER INSTRUMENT PANEL LH"
.
4.
Remove steering lock escutcheon.
5.
Remove cluster lid A, using power tool.
6.
Remove combination meter, using power tool.
7.
Disconnect combination meter electrical connectors.
Installation
Installation is in the reverse order of removal.
LIIA1744E
WIIA1053E
1.
Combination meter
2.
Combination meter screws
3.
Cluster lid A
4.
Ignition key lamp assembly
5.
Steering lock escutcheon
6.
Cluster lid A screws
INSTRUMENT PANEL ASSEMBLY
IP-15
C
D
E
F
G
H
J
K
L
M
A
B
IP
2006 Pathfinder
A/T FINISHER
Removal
1.
Remove cup holder finisher.
2.
Remove A/T finisher bezel.
3.
Pull up to release clips and remove the A/T finisher.
Installation
Installation is in the reverse order of removal.
LOWER INSTRUMENT PANEL RH AND LOWER GLOVE BOX
Removal
1.
Remove front pillar lower finisher. Refer to
2.
Remove lower instrument panel RH screws, using power tool.
3.
Remove lower instrument panel RH and lower glove box.
Installation
NOTE:
Install upper glove box before installing lower glove box.
Installation is in the reverse order of removal.
UPPER GLOVE BOX
Removal
1.
Remove lower instrument panel RH and lower glove box. Refer to
2.
Remove cluster lid C. Refer to
IP-11, "CLUSTER LID C -WITHOUT NAVIGATION SYSTEM"
3.
Remove upper glove box screws, using power tool.
4.
Remove upper glove box.
Installation
Installation is in the reverse order of removal.
WIIA1054E
1.
Cluster lid D
2.
A/T finisher
3.
Cup holder finisher
4.
Center console front base
⇐
Front
IP-16
INSTRUMENT PANEL ASSEMBLY
2006 Pathfinder
CENTER CONSOLE
Removal
1.
Remove lower instrument panel RH. Refer to
IP-15, "LOWER INSTRUMENT PANEL RH AND LOWER
2.
Remove cup holder finisher.
3.
.
4.
Remove center console screws.
5.
Disconnect electrical connectors and remove center console.
Installation
Installation is in the reverse order of removal.
WIIA1058E
INSTRUMENT PANEL ASSEMBLY
IP-17
C
D
E
F
G
H
J
K
L
M
A
B
IP
2006 Pathfinder
Disassembly and Assembly
EIS008IC
LOWER GLOVE BOX
Disassembly
1.
Remove fuse block cover.
2.
Remove damper hook.
3.
Remove lower glove box latch cover.
4.
Remove lower glove box latch assembly.
Assembly
Assembly is in the reverse order of disassembly.
UPPER GLOVE BOX
Disassembly
1.
Remove upper glove box door screws.
2.
Remove upper glove box door.
Assembly
Assembly is in the reverse order of disassembly.
1.
Upper glove box
2.
Upper glove box door
3.
Lower instrument panel RH
4.
Fuse block cover
5.
Lower glove box latch assembly cover 6.
Lower glove box
7.
Lower glove box latch assembly
8.
Damper hook
9.
Lower glove box damper
WIIA1049E
IP-18
INSTRUMENT PANEL ASSEMBLY
2006 Pathfinder
CENTER CONSOLE
Disassembly
1.
Remove center console. Refer to
.
2.
Remove center console lid.
3.
Remove latch from center console lid.
4.
Remove hinge from center console lid.
5.
Remove rear finisher assembly.
6.
Remove rear cup holder assembly.
7.
Remove DVD player, if equipped.
8.
Disconnect center console harness connectors.
9.
Remove cup holder insert and cup holder assembly.
10. Remove center console bin.
11. Remove center console bracket.
12. Remove wire harness bracket.
LIIA1749E
1.
Cup holder assembly
2.
Cup holder insert
3.
Center console bin
4.
Center console lid
5.
Hinge
6.
Ventilator console grille
7.
Rear cup holder assembly
8.
Rear finisher assembly
9.
Wire harness bracket
10.
Bracket DVD
11.
Center console rear base
12.
Bracket
13.
Cup holder finisher
14.
Center console front base
15.
A/T finisher bezel
16.
A/T finisher
17.
Ash tray
18.
Switch assembly
19.
Switch finisher
20.
CD changer door
21.
Console bin
INSTRUMENT PANEL ASSEMBLY
IP-19
C
D
E
F
G
H
J
K
L
M
A
B
IP
2006 Pathfinder
Assembly
Assembly is in the reverse order of disassembly.
IP-20
INSTRUMENT PANEL ASSEMBLY
2006 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст