Nissan Pathfinder (2006 year). Manual — part 99
DOOR
BL-93
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Pathfinder
Installation is in the reverse order of removal.
REAR DOOR
1.
Remove the door finisher. Refer to
2.
Remove the inner seal.
3.
Remove the rear door glass and regulator. Refer to
GW-61, "REAR DOOR GLASS AND REGULATOR"
4.
Remove the door harness.
5.
Remove the check link bolt from the hinge pillar.
6.
Remove the door-side hinge nuts, and remove the door assembly.
Installation is in the reverse order of removal.
BACK DOOR
1.
Remove the glass hatch. Refer to
2.
Remove the license lamp finisher. Refer to
EI-19, "LICENSE LAMP FINISHER"
3.
Remove the back door lock assembly. Refer to
4.
Remove the back door wire harness.
5.
Remove the rear washer nozzle and hose from the back door. Refer to
CAUTION:
Two technicians should be used to avoid damaging the back door during removal.
6.
Support the back door.
7.
Remove the back door stays.
Door hinge nuts
24.5 N·m (2.5 kg-m, 18 ft-lb)
LIIA1727E
Check link to hinge pillar
bolt
14.7 N·m (1.5 kg-m, 11 ft-lb)
LIIA1726E
Door hinge nuts
24.5 N·m (2.5 kg-m, 18 ft-lb)
LIIA1727E
BL-94
DOOR
2006 Pathfinder
8.
Remove the door side nuts and the back door assembly.
Installation is in the reverse order of removal.
●
Align the back door. Refer to
WIIA1056E
FRONT DOOR LOCK
BL-95
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Pathfinder
FRONT DOOR LOCK
PFP:80502
Component Structure
EIS007Q3
Removal and Installation
EIS007Q4
REMOVAL
1.
Remove the front door window regulator. Refer to
2.
Remove door side grommet, and remove door key cylinder assembly (driver side) or outside handle
escutcheon (passenger side) bolts (TORX T30) from grommet hole.
CAUTION:
Do not forcibly remove the TORX bolts (T30).
3.
Separate the key cylinder rod from the key cylinder assembly.
1.
Grommet
2.
Front door striker
3.
Door lock assembly
4.
Outside handle cable
5.
Inside handle assembly
6.
Inside handle cable
7.
Door lock cable
8.
Key cylinder rod (Driver side only)
9.
Door key cylinder
10. Outside handle bracket
11.
Front gasket
12. Outside handle
13. Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
14. Rear gasket
⇐
Vehicle front
WIIA0736E
Torx bolt
5.3 N·m (0.54 kg-m, 47 in-lb)
PIIA3553E
BL-96
FRONT DOOR LOCK
2006 Pathfinder
4.
While pulling the outside handle, remove door key cylinder
assembly or escutcheon.
5.
While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
6.
Remove the front gasket and rear gasket.
7.
Remove the TORX bolts (T30), remove the door lock assembly.
8.
While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket and door lock assembly.
PIIA3554E
LIIA0532E
PIIA3557E
Door lock assembly bolts
5.8 N·m (0.59 kg-m, 51 in-lb)
PIIA1090E
PIIA3558E
FRONT DOOR LOCK
BL-97
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Pathfinder
9.
Disconnect the door lock actuator connector.
10. Separate the outside handle cable connection from the outside
handle bracket.
INSTALLATION
Installation in the reverse order of removal.
CAUTION:
To install each rod, be sure to rotate the rod holder until a click is felt.
Disassembly and Assembly
EIS007Q5
DOOR KEY CYLINDER ASSEMBLY
Remove the key cylinder escutcheon pawl and remove the door key cylinder.
PIIA5059E
1.
Door key cylinder assembly
2.
Key cylinder escutcheon
3.
Door key cylinder
⇐
Pawl
WIIA1057E
BL-98
REAR DOOR LOCK
2006 Pathfinder
REAR DOOR LOCK
PFP:82502
Component Structure
EIS007Q6
Removal and Installation
EIS007Q7
REMOVAL
1.
Remove the rear door window regulator. Refer to
.
2.
Remove door grommets, and remove outside handle nuts from the hole.
3.
Remove outside handle.
4.
Disconnect the outside handle cable connection.
5.
Remove the inside door handle.
6.
Disconnect the door lock and inside door handle cables from the inside door handle.
7.
Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
Installation is in the reverse order of removal.
1.
Outside door handle
2.
Rear door striker
3.
Rear door lock assembly
4.
Outside door handle cable
5.
Inside door handle cable
6.
Inside door handle assembly
7.
Door lock cable
⇐
Vehicle front
WIIA0737E
BACK DOOR LOCK
BL-99
C
D
E
F
G
H
J
K
L
M
A
B
BL
2006 Pathfinder
BACK DOOR LOCK
PFP:90504
Component Structure
EIS007Q8
1.
Glass hatch latch assembly
2.
Emergency exit handle cable
3.
Back door latch cable
4.
Back door latch
5.
Back door release handle
6.
Back door striker
7.
Glass hatch release handle
8.
Emergency exit handle
⇐
Vehicle front
WIIA0776E
BL-100
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
2006 Pathfinder
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
PFP:28591
Component Parts and Harness Connector Location
EIS007Q9
LIIA2414E
1.
NATS antenna amplifier M21
(View with cluster lid A removed)
2.
BCM M18, M19, M20
(View with instrument lower panel LH
removed)
3.
IPDM E/R E118, E119, E120, E121,
E122, E123, E124
4.
ECM E16
5.
Combination meter M24
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст