Nissan Murano Z51 (2008 year). Manual — part 22
AV
RGB AREA (YS) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY
UNIT)
AV-125
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RGB AREA (YS) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DIS-
PLAY UNIT)
Description
INFOID:0000000003580023
Transmits the display area of RGB image displayed by video distributor with RGB area (YS) signal to rear dis-
play unit.
Diagnosis Procedure
INFOID:0000000003580024
1.
CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear display unit connector and video distributor connector.
3.
Check continuity between rear display unit harness connector and video distributor harness connector.
4.
Check continuity between rear display unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK RGB AREA (YS) SIGNAL
1.
Connect rear display unit connector and video distributor connector.
2.
Turn ignition switch ON.
3.
Check signal between rear display unit harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace rear display unit.
NO
>> Replace video distributor.
Rear display unit
Video distributor
Continuity
Connector
Terminal
Connector
Terminal
R152
15
M257
32
Existed
Rear display unit
Ground
Continuity
Connector
Terminal
R152
15
Not existed
(+)
(
−
)
Condition
Signal
Rear display unit
Connector
Terminal
R152
15
Ground
When AUX or DVD image is dis-
played on rear display unit.
0 V
Rear seat remote controller opera-
tion when AUX or DVD image is
displayed on rear display unit.
PKIB4948J
Revision: 2008 October
2009 Murano
AV-126
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
VP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)
VP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)
Description
INFOID:0000000003509235
In composite image (DVD and AUX images), transmit the vertical synchronizing (VP) signal and horizontal
synchronizing (HP) signal from rear display unit to video distributor so as to synchronize the RGB images dis-
played with video distributor such as the image quality adjusting menu, etc.
Diagnosis Procedure
INFOID:0000000003509236
1.
CHECK CONTINUITY VERTICAL SYNCHRONIZING (VP) SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear display unit connector and video distributor connector.
3.
Check continuity between rear display unit harness connector and video distributor harness connector.
4.
Check continuity between rear display unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL
1.
Connect rear display unit connector and video distributor connector.
2.
Turn ignition switch ON.
3.
Check signal between rear display unit harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace video distributor.
NO
>> Replace rear display unit.
Rear display unit
Video distributor
Continuity
Connector
Terminal
Connector
Terminal
R152
17
M257
29
Existed
Rear display unit
Ground
Continuity
Connector
Terminal
R152
17
Not existed
(+)
(
−
)
Condition
Signal
Rear display unit
Connector
Terminal
R152
17
Ground
—
SKIB3598E
Revision: 2008 October
2009 Murano
AV
HP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)
AV-127
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
HP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)
Description
INFOID:0000000003509237
In composite image (DVD and AUX images), transmit the vertical synchronizing (VP) signal and horizontal
synchronizing (HP) signal from rear display unit to video distributor so as to synchronize the RGB images dis-
played with video distributor such as the image quality adjusting menu, etc.
Diagnosis Procedure
INFOID:0000000003509238
1.
CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear display unit connector and video distributor connector.
3.
Check continuity between rear display unit harness connector and video distributor harness connector.
4.
Check continuity between rear display unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL
1.
Connect rear display unit connector and video distributor connector.
2.
Turn ignition switch ON.
3.
Check signal between rear display unit harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace video distributor.
NO
>> Replace rear display unit.
Rear display unit
Video distributor
Continuity
Connector
Terminal
Connector
Terminal
R152
18
M257
30
Existed
Rear display unit
Ground
Continuity
Connector
Terminal
R152
18
Not existed
(+)
(
−
)
Condition
Signal
Rear display unit
Connector
Terminal
R152
18
Ground
—
SKIB3601E
Revision: 2008 October
2009 Murano
AV-128
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
AUX IMAGE SIGNAL CIRCUIT
AUX IMAGE SIGNAL CIRCUIT
WITHOUT DVD ENTERTAINMENT SYSTEM
WITHOUT DVD ENTERTAINMENT SYSTEM : Description
INFOID:0000000003509223
• Transmits the image signal of AUX device from auxiliary input jacks to AV control unit.
• AV control unit transmits the image signal that is input to the front display unit.
WITHOUT DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure
INFOID:0000000003509224
1.
CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT (AUX INPUT JACKS AND AV CONTROL UNIT)
1.
Turn ignition switch OFF.
2.
Disconnect auxiliary input jacks connector and AV control unit connector.
3.
Check continuity between auxiliary input jacks harness connector and AV control unit harness connector.
4.
Check continuity between AV control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK AUX IMAGE SIGNAL (AUX INPUT JACKS TO AV CONTROL UNIT)
1.
Connect auxiliary connector and AV control unit connector.
2.
Turn ignition switch ON.
3.
Check signal between AV control unit harness connector using an oscilloscope.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Check that there is no malfunction in the external device.
3.
CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT AND FRONT DISPLAY UNIT)
1.
Turn ignition switch OFF.
2.
Disconnect front display unit connector and AV control unit connector.
3.
Check continuity between front display unit harness connector and AV control unit harness connector.
Auxiliary input jacks
AV control unit
Continuity
Connector
Terminals
Connector
Terminals
M253
7
M130
66
Existed
8
74
AV control unit
Ground
Continuity
Connector
Terminal
M130
66
Not existed
(+)
(
−
)
Condition
Signal
AV control unit
AV control unit
Connector
Terminal
Connector
Terminal
M130
66
M130
74
When AUX image is displayed on
front display.
SKIB2251J
Revision: 2008 October
2009 Murano
AV
AUX IMAGE SIGNAL CIRCUIT
AV-129
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
4.
Check continuity between front display unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair harness or connector.
4.
CHECK AUX IMAGE SIGNAL
1.
Connect AV control unit connector and front display unit connector.
2.
Turn ignition switch ON.
3.
Check signal between front display unit harness connector using an oscilloscope.
Is the inspection result normal?
YES
>> Replace front display unit.
NO
>> Replace AV control unit.
WITH DVD ENTERTAINMENT SYSTEM
WITH DVD ENTERTAINMENT SYSTEM : Description
INFOID:0000000003509221
Transmits the image signal of external device from auxiliary input jacks to video distributor.
WITH DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure
INFOID:0000000003509222
1.
CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect auxiliary input jacks connector and video distributor connector.
3.
Check continuity between auxiliary input jacks harness connector and video distributor harness connec-
tor.
4.
Check continuity between video distributor harness connector and ground.
AV control unit
Front display unit
Continuity
Connector
Terminals
Connector
Terminals
M129
36
M49
15
Existed
37
4
Front display unit
Ground
Continuity
Connector
Terminal
M49
15
Not existed
(+)
(
−
)
Condition
Signal
Front display unit
Front display unit
Connector
Terminal
Connector
Terminal
M49
15
M49
4
When AUX image is displayed on
front display.
SKIB2251J
Auxiliary input jacks
Video distributor
Continuity
Connector
Terminals
Connector
Terminals
M253
7
M258
19
Existed
8
21
Revision: 2008 October
2009 Murano
AV-130
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
AUX IMAGE SIGNAL CIRCUIT
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK AUX IMAGE SIGNAL
1.
Connect auxiliary input jacks connector and video distributor connector.
2.
Turn ignition switch ON.
3.
Check signal between video distributor harness connector using an oscilloscope.
Is the inspection result normal?
YES
>> Replace video distributor.
NO
>> Check that there is no malfunction in the external device.
Video distributor
Ground
Continuity
Connector
Terminal
M258
19
Not existed
(+)
(
−
)
Condition
Signal
Video distributor
Video distributor
Connector
Terminal
Connector
Terminal
M258
19
M258
21
When AUX image is displayed.
SKIB2251J
Revision: 2008 October
2009 Murano
AV
DVD IMAGE SIGNAL CIRCUIT
AV-131
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DVD IMAGE SIGNAL CIRCUIT
Description
INFOID:0000000003509225
The DVD player transmits the playback DVD image signal to the video distributor. The video distributor
receives the image signal from the DVD player, and auxiliary input jack, and then transmits it to the AV control
unit and rear display.
Diagnosis Procedure
INFOID:0000000003509226
1.
CHECK CONTINUITY DVD IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect DVD player connector and video distributor connector.
3.
Check continuity between DVD player harness connector and video distributor harness connector.
4.
Check continuity between video distributor harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK DVD IMAGE SIGNAL
1.
Connect DVD player connector and video distributor connector.
2.
Turn ignition switch ON.
3.
Check signal between video distributor harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace video distributor.
NO
>> Replace DVD player.
DVD player
Video distributor
Continuity
Connector
Terminals
Connector
Terminals
M254
7
M258
23
Existed
5
22
Video distributor
Ground
Continuity
Connector
Terminal
M258
23
Not existed
(+)
(
−
)
Condition
Signal
Video distributor
Connector
Terminal
M258
23
Ground
When DVD image is displayed.
SKIB2251J
Revision: 2008 October
2009 Murano
AV-132
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
DISK EJECT SIGNAL CIRCUIT
DISK EJECT SIGNAL CIRCUIT
Description
INFOID:0000000003356806
The eject signal is output to AV control unit when the eject switch of multifunction switch is pressed.
Diagnosis Procedure
INFOID:0000000003356807
1.
CHECK CONTINUITY DISK EJECT SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect multifunction switch connector and AV control unit connector.
3.
Check continuity between multifunction switch harness connector and AV control unit harness connector.
4.
Check continuity between multifunction switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK AV CONTROL UNIT VOLTAGE
1.
Connect AV control unit connector.
2.
Turn ignition switch ON.
3.
Check voltage between AV control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace preset switch.
NO
>> Replace AV control unit.
Multifunction switch
AV control unit
Continuity
Connector
Terminal
Connector
Terminal
M125
14
M131
103
Existed
Multifunction switch
Ground
Continuity
Connector
Terminal
M125
14
Not existed
(+)
(
−
)
Voltage
(Approx.)
AV control unit
Connector
Terminal
M131
103
Ground
3.3 V
Revision: 2008 October
2009 Murano
AV
MICROPHONE SIGNAL CIRCUIT
AV-133
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
MICROPHONE SIGNAL CIRCUIT
Description
INFOID:0000000003356808
Supply power from TEL adapter unit to microphone. The microphone transmits the sound/voice to the micro-
phone.
Diagnosis Procedure
INFOID:0000000003356809
1.
CHECK CONTINUITY BETWEEN TEL ADAPTER UNIT AND MICROPHONE CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect TEL adapter unit connector and microphone connector.
3.
Check continuity between TEL adapter unit harness connector and microphone harness connector.
4.
Check continuity between TEL adapter unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE MICROPHONE VCC
1.
Connect TEL adapter unit connector.
2.
Turn ignition switch ON.
3.
Check voltage between TEL adapter unit harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace TEL adapter unit.
3.
CHECK MICROPHONE SIGNAL
1.
Connect microphone connector.
2.
Check signal between TEL adapter unit harness connector using an oscilloscope.
TEL adapter unit
Microphone
Continuity
Connector
Terminals
Connector
Terminals
B39
7
R20
1
Existed
8
2
29
4
TEL adapter unit
Ground
Continuity
Connector
Terminals
B39
7
Not existed
29
(+)
(
−
)
Voltage
(Approx.)
TEL adapter unit
TEL adapter unit
Connector
Terminal
Connector
Terminal
B39
29
B39
8
5.0 V
Revision: 2008 October
2009 Murano
AV-134
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
MICROPHONE SIGNAL CIRCUIT
Is the inspection result normal?
YES
>> Replace TEL adapter unit.
NO
>> Replace microphone.
(+)
(
−
)
Condition
Signal
TEL adapter unit
TEL adapter unit
Connector
Terminal
Connector
Terminal
B39
7
B39
8
Give a voice
PKIB5037J
Revision: 2008 October
2009 Murano
AV
CONTROL SIGNAL CIRCUIT
AV-135
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
CONTROL SIGNAL CIRCUIT
Description
INFOID:0000000003356810
TEL adapter unit identifies the vehicle model according to the control signal and performs the control.
Diagnosis Procedure
INFOID:0000000003356811
1.
CHECK CONTINUITY CONTROL SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect TEL adapter unit connector.
3.
Check continuity between TEL adapter unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace TEL adapter unit.
NO
>> Repair harness or connector.
TEL adapter unit
Ground
Continuity
Connector
Terminals
B39
20
Existed
24
Revision: 2008 October
2009 Murano
AV-136
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CON-
TROL UNIT)
CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA
CONTROL UNIT)
Description
INFOID:0000000003509239
• Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image sig-
nal from rear view camera when the reverse signal is input.
• The camera control unit that inputs the camera image signal transmits the camera image signal to the AV
control unit.
Diagnosis Procedure
INFOID:0000000003509240
1.
CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect camera control unit connector and rear view camera connector.
3.
Check continuity between camera control unit harness connector and rear view camera harness connec-
tor.
4.
Check continuity between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK CAMERA IMAGE SIGNAL
1.
Connect camera control unit connector and rear view camera connector.
2.
Turn ignition switch ON.
3.
Check signal between camera control unit harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace camera control unit.
NO
>> Replace rear view camera.
Camera control unit
Rear view camera
Continuity
Connector
Terminal
Connector
Terminal
B60
6
D192
3
Existed
Camera control unit
Ground
Continuity
Connector
Terminal
B60
6
Not existed
(+)
(
−
)
Condition
Signal
Camera control unit
Connector
Terminal
B60
6
Ground
Shift the selector lever to “R” posi-
tion.
SKIB2251J
Revision: 2008 October
2009 Murano
AV
CAMERA ON SIGNAL CIRCUIT
AV-137
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
CAMERA ON SIGNAL CIRCUIT
Description
INFOID:0000000003509241
• Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image sig-
nal from rear view camera when the reverse signal is input.
• The camera control unit that inputs the camera image signal transmits the camera image signal to the AV
control unit.
Diagnosis Procedure
INFOID:0000000003509242
1.
CHECK CONTINUITY CAMERA ON SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect camera control unit connector and rear view camera connector.
3.
Check continuity between camera control unit harness connector and rear view camera harness connec-
tor.
4.
Check continuity between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE CAMERA ON SIGNAL
1.
Connect camera control unit connector and rear view camera connector.
2.
Turn ignition switch ON.
3.
Check signal between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear view camera.
NO
>> Replace camera control unit.
Camera control unit
Rear view camera
Continuity
Connector
Terminal
Connector
Terminal
B60
8
D192
1
Existed
Camera control unit
Ground
Continuity
Connector
Terminal
B60
8
Not existed
(+)
(
−
)
Condition
Voltage
(Approx.)
Camera control unit
Connector
Terminal
B60
8
Ground
Shift the selector lever to “R” posi-
tion.
6.0 V
Revision: 2008 October
2009 Murano
AV-138
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO AV CON-
TROL UNIT)
CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO AV
CONTROL UNIT)
Description
INFOID:0000000003509243
• Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image sig-
nal from rear view camera when the reverse signal is input.
• The camera control unit that inputs the camera image signal transmits the camera image signal to the AV
control unit.
Diagnosis Procedure
INFOID:0000000003509244
1.
CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect camera control unit connector and AV control unit connector.
3.
Check continuity between camera control unit harness connector and AV control unit harness connector.
4.
Check continuity between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK CAMERA IMAGE SIGNAL
1.
Connect camera control unit connector and AV control unit connector.
2.
Turn ignition switch ON.
3.
Check signal between camera control unit harness connector and ground using an oscilloscope.
Is the inspection result normal?
YES
>> Replace AV control unit.
NO
>> Replace camera control unit.
Camera control unit
AV control unit
Continuity
Connector
Terminal
Connector
Terminal
B60
12
M130
65
Existed
11
64
Camera control unit
Ground
Continuity
Connector
Terminal
B60
12
Not existed
(+)
(
−
)
Condition
Signal
Camera control unit
Connector
Terminal
B60
12
Ground
Shift the selector lever to “R” posi-
tion.
SKIB2251J
Revision: 2008 October
2009 Murano
AV
STEERING ANGLE SENSOR SIGNAL CIRCUIT
AV-139
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING ANGLE SENSOR SIGNAL CIRCUIT
Description
INFOID:0000000003566415
• Steering angle sensor signal 1, 2 detects the turning direction and quantity of the steering and transmits it to
the camera control unit.
• Steering angle sensor signal 3 detects the neutral position of the steering and transmits it to the camera con-
trol unit.
• Camera control unit performs the correction of neutral position with sensor signal 1, 2, 3 and vehicle speed
signal.
Diagnosis Procedure
INFOID:0000000003566416
1.
CHECK CONTINUITY STEERING ANGLE SENSOR SIGNAL CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect camera control unit connector and steering angle sensor connector.
3.
Check continuity between camera control unit harness connector and steering angle sensor harness con-
nector.
4.
Check continuity between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK VOLTAGE CAMERA CONTROL UNIT
1.
Connect camera control unit connector.
2.
Turn ignition switch ON.
3.
Check voltage between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace camera control unit.
3.
CHECK STEERING ANGLE SENSOR SIGNAL
1.
Turn ignition switch OFF.
2.
Connect steering angle sensor connector.
Camera control unit
Steering angle sensor
Continuity
Connector
Terminals
Connector
Terminals
B60
23
M30
3
Existed
24
6
25
8
Camera control unit
Ground
Continuity
Connector
Terminals
B60
23
Not existed
24
25
(+)
(
−
)
Reference value
(Approx.)
Camera control unit
Connector
Terminals
B60
23
Ground
5.0 V
24
25
Revision: 2008 October
2009 Murano
AV-140
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
STEERING ANGLE SENSOR SIGNAL CIRCUIT
3.
Turn ignition switch ON.
4.
Check signal between camera control unit harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace steering angle sensor.
(+)
(
−
)
Condition
Reference value
Camera control unit
Connector
Terminals
B60
23, 24
Ground
Turn the steering to the right
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left
A: Sensor signal 1
B: Sensor signal 2
25
Ground
Turn the steering around the
neutral position
A: Sensor signal 3
B: Sensor signal 1
SKIB3827E
SKIB3828E
SKIB3829E
Revision: 2008 October
2009 Murano
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст