Nissan Pathfinder (2010 year). Manual — part 638
TM-232
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
57. Remove D-rings from reverse brake piston.
58. Knock out retaining pin using suitable tool.
59. Remove manual shaft retaining pin using suitable tool.
60. Remove manual plate (with parking rod) from manual shaft.
61. Remove parking rod from manual plate.
SCIA6330E
SCIA2328E
SCIA2329E
SCIA5715E
SCIA5220E
2010 Pathfinder
DISASSEMBLY
TM-233
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
62. Remove manual shaft from transmission case.
63. Remove manual shaft oil seals using suitable tool.
CAUTION:
Do not scratch transmission case.
64. Remove detent spring and spacer from transmission case.
65. Remove snap ring from transmission case using suitable tool.
66. Remove servo assembly (with return spring) from transmission
case.
SCIA5716E
SCIA2331E
SCIA5248E
SCIA2333E
SCIA5679E
2010 Pathfinder
TM-234
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
67. Remove return spring from servo assembly.
68. Remove O-rings from servo assembly.
69. Remove needle bearing (1) from rear extension (2WD models)
or adapter case (4WD models).
70. Remove parking actuator support from rear extension (2WD
models) or adapter case (4WD models).
71. Remove parking pawl (with return spring) and pawl shaft from
rear extension (2WD models) or adapter case (4WD models).
SCIA5717E
SCIA5719E
SCIA6179J
SCIA3423E
SCIA3424E
2010 Pathfinder
DISASSEMBLY
TM-235
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
72. Remove return spring (1) from parking pawl (2).
73. Remove rear oil seal from rear extension (2WD models) or
adapter case (4WD models) using suitable tool.
CAUTION:
Do not scratch rear extension (2WD models) or adapter
case (4WD models).
SCIA6180J
SCIA5272E
2010 Pathfinder
TM-236
< DISASSEMBLY AND ASSEMBLY >
OIL PUMP
OIL PUMP
Exploded View
INFOID:0000000005258201
Oil Pump
Disassembly and Assembly
INFOID:0000000005258202
DISASSEMBLY
1. Remove oil pump housing from oil pump cover.
2. Remove oil pump housing oil seal using suitable tool.
CAUTION:
Do not scratch oil pump housing.
1.
O-ring
2.
Oil pump cover
3.
O-ring
4.
Oil pump housing
5.
Oil pump housing oil seal
SCIA5227E
SCIA5228E
SCIA2840E
2010 Pathfinder
OIL PUMP
TM-237
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
3. Remove O-ring from oil pump housing.
4. Remove O-ring from oil pump cover.
ASSEMBLY
1. Install O-ring to oil pump cover.
CAUTION:
• Do not reuse O-ring.
• Apply ATF to O-ring.
2. Install O-ring to oil pump housing.
CAUTION:
• Do not reuse O-ring.
• Apply ATF to O-ring.
SCIA2841E
SCIA5230E
SCIA5230E
SCIA2841E
2010 Pathfinder
TM-238
< DISASSEMBLY AND ASSEMBLY >
OIL PUMP
3. Install oil pump housing oil seal to the oil pump housing until it is
flush using Tool.
CAUTION:
• Do not reuse oil seal.
• Apply ATF to oil seal.
4. After temporarily tightening the bolts for the oil pump housing to
the oil pump cover, tighten them to the specified torque in the
sequence shown.
Tool number
: ST33400001 (J-26082)
SCIA5313E
Oil pump housing bolts
: 9.0 N·m (0.92 kg-m, 80 in-lb.)
SCIA6329E
2010 Pathfinder
FRONT SUN GEAR, 3RD ONE-WAY CLUTCH
TM-239
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
FRONT SUN GEAR, 3RD ONE-WAY CLUTCH
Exploded View
INFOID:0000000005258203
Disassembly and Assembly
INFOID:0000000005258204
DISASSEMBLY
1. Remove snap ring from front sun gear using suitable tool.
2. Remove 3rd one-way clutch from front sun gear.
INSPECTION
3rd One-way Clutch
• Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 3rd one-way clutch.
1.
Front sun gear
2.
3rd one-way clutch
3.
Snap ring
SCIA3114E
SCIA3110E
SCIA3111E
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст