Nissan Pathfinder (2010 year). Manual — part 504
MWI-4
< FUNCTION DIAGNOSIS >
METER SYSTEM
FUNCTION DIAGNOSIS
METER SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000005260323
METER SYSTEM : System Description
INFOID:0000000005260324
COMBINATION METER
• Speedometer, odo/trip meter, tachometer, fuel gauge, engine coolant temperature gauge, engine oil pres-
sure gauge, voltage gauge and trip computer are controlled by the unified meter control unit, which is built
into the combination meter.
• Warning and indicator lamps are controlled by the unified meter control unit and by components connected
directly to the combination meter.
• Digital meter is adopted for odo/trip meter*, as well as the A/T position indicator display.
*The record of the odometer is kept even if the battery cable is disconnected. The record of the trip meter is
erased when the battery cable is disconnected.
• Odo/trip meter and A/T indicator segments can be checked in diagnosis mode.
• Meter/gauge can be checked in diagnosis mode.
NOTE:
Under the following conditions, the meters will perform a homing function. The meter pointers will move down
slightly and then move back to the resting position. This is a normal design condition.
• Approximately 60 seconds after turning the ignition switch from the ON to the OFF position
• If the battery is disconnected and then reconnected
AWNIA0215GB
2010 Pathfinder
MWI
METER SYSTEM
MWI-5
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER SYSTEM : Arrangement of Combination Meter
INFOID:0000000005260325
AWNIA1915GB
2010 Pathfinder
MWI-6
< FUNCTION DIAGNOSIS >
METER SYSTEM
METER SYSTEM : Component Parts Location
INFOID:0000000005260326
METER SYSTEM : Component Description
INFOID:0000000005260327
AWNIA0217ZZ
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E7 (with VK56DE)
E16 (with VQ40DE)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit)
E125 (with VQ40DE)
E127 (with VK56DE)
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with VK56DE)
A: Oil pan (upper)
7.
A/T assembly F9
8.
BCM M18, M19 (view with instrument
lower panel LH removed)
9.
IPDM E/R E122, E124
Unit
Description
Combination meter
Controls the following with the signals received from each unit via CAN communication and the sig-
nals from switches and sensors.
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Engine oil pressure gauge
• Odo/trip meter
• Voltage gauge
• Indicator lamps
• Warning lamps
• Warning chime
• Trip computer
IPDM E/R
IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch
signal to the combination meter via BCM with CAN communication line.
Fuel level sensor unit
Refer to
.
Oil pressure switch
Refer to
.
2010 Pathfinder
MWI
METER SYSTEM
MWI-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000005260328
SPEEDOMETER : System Description
INFOID:0000000005260329
The ABS actuator and electric unit (control unit) provides a vehicle speed signal to the combination meter via
CAN communication lines.
SPEEDOMETER : Component Parts Location
INFOID:0000000005488320
ECM
Transmits the following signals to the combination meter with CAN communication line.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter with CAN communication line.
BCM
• Transmits signals provided by various units to the combination meter with CAN communication
line.
• Transmits the security signal to the combination meter.
TCM
Transmits shift position signal to the combination meter with CAN communication line.
Unit
Description
WKIA5370E
AWNIA0217ZZ
2010 Pathfinder
MWI-8
< FUNCTION DIAGNOSIS >
METER SYSTEM
SPEEDOMETER : Component Description
INFOID:0000000005260331
TACHOMETER
TACHOMETER : System Diagram
INFOID:0000000005260332
TACHOMETER : System Description
INFOID:0000000005260333
The tachometer indicates engine speed in revolutions per minute (rpm).
The ECM provides an engine speed signal to the combination meter via CAN communication lines.
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E7 (with VK56DE)
E16 (with VQ40DE)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit)
E125 (with VQ40DE)
E127 (with VK56DE)
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with VK56DE)
A: Oil pan (upper)
7.
A/T assembly F9
8.
BCM M18, M19 (view with instrument
lower panel LH removed)
9.
IPDM E/R E122, E124
Unit
Description
Combination meter
Indicates the vehicle speed according to the vehicle speed signal received from ABS actuator and
electric unit (control unit) via CAN communication.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter with CAN communication line.
SKIB6904E
2010 Pathfinder
MWI
METER SYSTEM
MWI-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TACHOMETER : Component Parts Location
INFOID:0000000005488321
TACHOMETER : Component Description
INFOID:0000000005260335
ENGINE COOLANT TEMPERATURE GAUGE
AWNIA0217ZZ
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E7 (with VK56DE)
E16 (with VQ40DE)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit)
E125 (with VQ40DE)
E127 (with VK56DE)
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with VK56DE)
A: Oil pan (upper)
7.
A/T assembly F9
8.
BCM M18, M19 (view with instrument
lower panel LH removed)
9.
IPDM E/R E122, E124
Unit
Description
Combination meter
Indicates the engine speed in RPM according to the engine speed signal received from ECM via
CAN communication.
ECM
Transmits the engine speed signal to the combination meter with CAN communication line.
2010 Pathfinder
MWI-10
< FUNCTION DIAGNOSIS >
METER SYSTEM
ENGINE COOLANT TEMPERATURE GAUGE : System Diagram
INFOID:0000000005260336
ENGINE COOLANT TEMPERATURE GAUGE : System Description
INFOID:0000000005260337
The engine coolant temperature gauge indicates the engine coolant temperature.
The ECM provides an engine coolant temperature signal to the combination meter via CAN communication
lines.
ENGINE COOLANT TEMPERATURE GAUGE : Component Parts Location
INFOID:0000000005488322
SKIB6905E
AWNIA0217ZZ
1.
Combination meter M24
2.
Fuel level sensor unit and fuel pump C5
(view with fuel tank removed)
3.
ECM (view with ECM cover removed)
E7 (with VK56DE)
E16 (with VQ40DE)
A. Coolant reservoir
4.
ABS actuator and electric unit (control
unit)
E125 (with VQ40DE)
E127 (with VK56DE)
5.
Oil pressure switch E208 (with VQ40DE)
A. Oil pan (upper)
6.
Oil pressure switch F4 (with VK56DE)
A: Oil pan (upper)
7.
A/T assembly F9
8.
BCM M18, M19 (view with instrument
lower panel LH removed)
9.
IPDM E/R E122, E124
2010 Pathfinder
MWI
METER SYSTEM
MWI-11
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ENGINE COOLANT TEMPERATURE GAUGE : Component Description
INFOID:0000000005260339
FUEL GAUGE
FUEL GAUGE : System Diagram
INFOID:0000000005260340
FUEL GAUGE : System Description
INFOID:0000000005260341
The fuel gauge indicates the approximate fuel level in the fuel tank.
The fuel gauge is regulated by the unified meter control unit and a variable resistor signal supplied by the fuel
level sensor unit.
FUEL GAUGE : Component Parts Location
INFOID:0000000005488323
Unit
Description
Combination meter
Indicates the engine coolant temperature according to the engine coolant temperature signal re-
ceived from ECM via CAN communication.
ECM
Transmits the engine coolant temperature signal to the combination meter via CAN communication.
AWNIA0004GB
AWNIA0217ZZ
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст