Nissan Pathfinder (2010 year). Manual — part 451
HAC-84
< COMPONENT DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
INTAKE SENSOR
1. Turn ignition switch OFF.
2. Disconnect A/C auto amp. connector.
3. Check continuity between intake sensor harness connector
M146 (B) terminal 1 and A/C auto amp. harness connector M49
(A) terminal 26.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair harness or connector.
3.
CHECK INTAKE SENSOR
Check intake sensor. Refer to
HAC-84, "Intake Sensor Component Inspection"
.
Is the inspection result normal?
YES
>> 1. Replace A/C auto amp. Refer to
VTL-7, "Removal and Installation"
.
2. Go to
HAC-24, "A/C Auto Amp. Self-Diagnosis"
and perform self-diagnosis.
NO
>> 1. Replace intake sensor. Refer to
VTL-11, "Removal and Installation"
.
2. Go to
HAC-24, "A/C Auto Amp. Self-Diagnosis"
and perform self-diagnosis.
4.
CHECK CIRCUIT CONTINUITY BETWEEN INTAKE SENSOR AND A/C AUTO AMP.
1. Turn ignition switch OFF.
2. Disconnect A/C auto amp. connector.
3. Check continuity between intake sensor harness connector
M146 (B) terminal 2 and A/C auto amp. harness connector M49
(A) terminal 11.
4. Check continuity between intake sensor harness connector
M146 (B) terminal 2 and ground.
Is the inspection result normal?
YES
>> 1. Replace A/C auto amp. Refer to
VTL-7, "Removal and Installation"
.
2. Go to
HAC-24, "A/C Auto Amp. Self-Diagnosis"
and perform self-diagnosis.
NO
>> Repair harness or connector.
Intake Sensor Component Inspection
INFOID:0000000005256960
COMPONENT INSPECTION
Intake Sensor
1 - 26
: Continuity should exist.
AWIIA0209ZZ
2 - 11
: Continuity should exist.
2 - Ground
: Continuity should not exist.
AWIIA0216ZZ
2010 Pathfinder
INTAKE SENSOR
HAC-85
< COMPONENT DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
After disconnecting intake sensor connector, measure resistance
between terminals 1 and 2 at sensor harness side, using the table
below.
If NG, replace intake sensor. Refer to
VTL-11, "Removal and Installa-
.
Temperature
°
C (
°
F)
Resistance k
Ω
−
15 (5)
209.0
−
10 (14)
160.0
−
5 (23)
123.0
0 (32)
95.8
5 (41)
74.9
10 (50)
58.9
15 (59)
46.7
20 (68)
37.3
25 (77)
30.0
30 (86)
24.2
35 (95)
19.7
40 (104)
16.1
45 (113)
13.2
WJIA1159E
2010 Pathfinder
HAC-86
< COMPONENT DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
POWER SUPPLY AND GROUND CIRCUIT FOR CONTROLLER
POWER SUPPLY AND GROUND CIRCUIT FOR CONTROLLER
Component Description
INFOID:0000000005256961
COMPONENT DESCRIPTION
A/C auto amp.
The A/C auto amp. (1) has a built-in microcomputer which processes
information sent from various sensors needed for air conditioner
operation. The air mix door motors, mode door motor, intake door
motor, defroster door motor, blower motor and compressor are then
controlled.
The A/C auto amp. is unitized with control mechanisms. When the
various switches and temperature dials are operated, data is input to
the A/C auto amp.
Self-diagnostic functions are also built into the A/C auto amp. to pro-
vide quick check of malfunctions in the auto air conditioner system.
Potentio Temperature Control (PTC)
There are two PTCs (driver and passenger) built into the A/C auto
amp. They can be set at an interval of 0.5
°
C (1.0
°
F) in the 18
°
C
(60
°
F) to 32
°
C (90
°
F) temperature range by rotating the temperature
dial. The set temperature is displayed.
A/C Auto Amp. Component Function Check
INFOID:0000000005256962
SYMPTOM: A/C system does not come on.
INSPECTION FLOW
1.
CONFIRM SYMPTOM BY PERFORMING OPERATIONAL CHECK - AUTO MODE
1. Press AUTO switch.
2. Display should indicate AUTO. Confirm that the compressor clutch engages (sound or visual inspection).
(Discharge air and blower speed will depend on ambient, in-vehicle and set temperatures.)
Can a symptom be duplicated?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
PERFORM COMPLETE OPERATIONAL CHECK
Perform a complete operational check and check for any symptoms. Refer to
.
Can a symptom be duplicated?
YES
>> Refer to
HAC-122, "How to Perform Trouble Diagnosis For Quick And Accurate Repair"
NO
>> System OK.
3.
CHECK FOR SERVICE BULLETINS
Check for any service bulletins.
>> GO TO 4.
4.
CHECK POWER AND GROUND CIRCUIT
Check main power supply and ground circuit. Refer to
HAC-160, "Front Air Control Power and Ground Diag-
.
AWIIA0170ZZ
AWIIA0211GB
2010 Pathfinder
POWER SUPPLY AND GROUND CIRCUIT FOR CONTROLLER
HAC-87
< COMPONENT DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
Is the inspection result normal?
YES
>> System OK.
NO
>> Replace A/C auto amp. Refer to
VTL-7, "Removal and Installation"
.
A/C Auto Amp Power and Ground Diagnosis Procedure
INFOID:0000000005256963
Regarding Wiring Diagram information, refer to
DIAGNOSTIC PROCEDURE FOR A/C SYSTEM
SYMPTOM: A/C system does not come on.
1.
CHECK POWER SUPPLY CIRCUITS FOR A/C AUTO AMP.
1. Disconnect A/C auto amp. connectors.
2. Check voltage between A/C auto amp. harness connector M49
(B) terminal 15 and M50 (A) terminal 27, and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check 10A fuses [Nos. 8 and 19, located in the fuse block (J/B)]. Refer to
Amp. Terminals Reference Values"
• If fuses are OK, check harness for open circuit. Repair or replace as necessary.
• If fuses are NG, replace fuse and check harness for short circuit. Repair or replace as neces-
sary.
2.
CHECK GROUND CIRCUIT FOR A/C AUTO AMP.
1. Turn ignition switch OFF.
2. Check continuity between A/C auto amp. harness connector
M50 terminal 36 and ground.
Is the inspection result normal?
OK
>> Replace A/C auto amp. Refer to
NG
>> Repair harness or connector.
AWIIA0212GB
Terminals
Ignition switch position
(+)
(-)
OFF
ACC
ON
A/C auto
amp. con-
nector
Terminal No.
M49
15
Ground
Approx. 0V
Approx. 0V
Battery
voltage
M50
27
Battery
voltage
Battery
voltage
Battery
voltage
AWIIA1047ZZ
36 - Ground
: Continuity should exist.
AWIIA0214ZZ
2010 Pathfinder
HAC-88
< ECU DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
AIR CONDITIONER CONTROL
ECU DIAGNOSIS
AIR CONDITIONER CONTROL
A/C Auto Amp. Terminals Reference Values
INFOID:0000000005256964
Measure voltage between each terminal and ground by following
Terminals and Reference Value for A/C auto amp. (1).
A/C AUTO AMP. HARNESS CONNECTOR TERMINAL LAYOUT
TERMINALS AND REFERENCE VALUES FOR A/C AUTO AMP.
AWIIA0170ZZ
AWIIA0840ZZ
Terminal
No.
Wire
color
Item
Ignition
switch
Condition
Voltage (V)
(Approx.)
1
G
Optical sensor (driver)
ON
-
0 - 5V
2
L
Air mix door motor (passenger) CCW
ON
-
0 - 5V
3
G
V ref ACTR (ground)
ON
-
5V
4
W
Compressor ON signal
ON
A/C switch OFF
5V
ON
A/C switch ON
0V
5
R
Fan ON signal
ON
Blower switch OFF
5V
ON
Blower switch ON
0V
6
SB
Air mix door motor (driver) feedback
ON
-
0 - 5V
7
V
Mode door motor (front) feedback
ON
-
0 - 5V
8
G
Illumination +
ON
Park lamps ON
Battery voltage
9
BR
Illumination -
-
Park lamps ON
11
L
Intake sensor
ON
-
0 - 5V
12
P
Variable blower control (rear)
ON
-
0 - 5V
13
R
Variable blower control (front)
ON
Blower speed (low)
1.7V
Blower speed (high)
4.5V
PIIA2344E
2010 Pathfinder
AIR CONDITIONER CONTROL
HAC-89
< ECU DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
14
LG
Air mix door motor (passenger) CW
ON
Clockwise rotation
Battery voltage
15
W/G
Power supply for IGN
ON
-
Battery voltage
17
GR
Air mix door motor (driver) CW
ON
Clockwise rotation
Battery voltage
18
BR
Air mix door motor (driver) CCW
ON
Counterclockwise rotation
Battery voltage
19
L
Mode door motor CW (front)
ON
Clockwise rotation
Battery voltage
20
B/R
Mode door motor CCW
ON
Counterclockwise rotation
Battery voltage
21
O
Intake door motor CCW
ON
Counterclockwise rotation
Battery voltage
22
O
Intake door motor CW
ON
Clockwise rotation
Battery voltage
25
W
Ambient sensor
ON
-
0 - 5V
26
V
Sensor ground
ON
-
0V
27
R/Y
Power supply for BAT
-
-
Battery voltage
28
P
V ref ACTR (5V)
ON
-
0 - 5V
29
SB
Air mix door motor (passenger) feed-
back
ON
-
0 - 5V
30
R
Air mix door motor (Rear) feedback
ON
-
0 - 5V
31
BR
In-vehicle sensor motor (+)
ON
-
Battery voltage
32
LG
In-vehicle sensor signal
ON
-
0 - 5V
34
GY
Front aux backlight dim
ON
Headlamps OFF
Battery voltage
35
W/G
Front aux tell tale LED
ON
Tell tale OFF
Battery voltage
36
B
Ground
-
-
0V
37
GR
Front aux temp pot
ON
Rear air control (front) tem-
perature control dial
0 - 5V
38
P
Front aux blower pot
ON
Rear air control (front)
blower motor
0 - 5V
39
SB
Front AUX (rear)
ON
-
0 - 5V
40
P
CAN-L
ON
-
0 - 5V
41
L
CAN-H
ON
-
0 - 5V
42
GR
Optical sensor (passenger)
ON
-
0 - 5V
43
V
Air mix door motor (Rear) CW
ON
Clockwise rotation
Battery voltage
44
O
Air mix door motor (Rear) CCW
ON
Counterclockwise rotation
Battery voltage
45
P
Water valve (VK56DE)
ON
Water valve open
Battery voltage
Water valve closed
0V
46
R
Water valve (VK56DE)
ON
Water valve open
0V
Water valve closed
Battery voltage
50
GR
Heater pump request (VQ40DE)
ON
Heater pump on
0V
Heater pump off
Battery voltage
51
L
Rear aux temp pot
ON
Rear air control (rear) tem-
perature control dial
0 - 5V
52
W
Rear aux blower pot
ON
Rear blower motor
0 - 5V
Terminal
No.
Wire
color
Item
Ignition
switch
Condition
Voltage (V)
(Approx.)
2010 Pathfinder
HAC-90
< ECU DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
AIR CONDITIONER CONTROL
Wiring Diagram
INFOID:0000000005256965
ABIWA0083GB
2010 Pathfinder
AIR CONDITIONER CONTROL
HAC-91
< ECU DIAGNOSIS >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
ABIWA0080GB
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст