Murano Cross Cabriolet Z51 (2012 year). Manual — part 28
DEF-14
< ECU DIAGNOSIS INFORMATION >
SOFT TOP CONTROL UNIT
SOFT TOP CONTROL UNIT
List of ECU Reference
INFOID:0000000007566493
ECU
Reference
Soft top control unit
RF-61, "DTC Inspection Priority Chart"
Revision: 2013 February
2012 Murano CrossCabriolet
REAR WINDOW DEFOGGER SYSTEM
DEF-15
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
WIRING DIAGRAM
REAR WINDOW DEFOGGER SYSTEM
Wiring Diagram
INFOID:0000000007566494
JCLWA5333GB
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-16
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000007566495
DETAILED FLOW
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred) as much as possible when the customer brings the vehicle in.
>> GO TO 2.
2.
CHECK DTC
Perform self diagnosis with CONSULT
Is any DTC detected?
YES
>> Refer to
DEF-13, "List of ECU Reference"
NO
>> GO TO 3.
3.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>> GO TO 4.
4.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 3. Then identify where to start perform-
ing the diagnosis based on possible causes and symptoms.
>> GO TO 5.
5.
IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>> GO TO 6.
6.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>> GO TO 7.
7.
FINAL CHECK
Check that malfunctions are not reproduced when obtaining the malfunction information from the customer,
referring to the symptom inspection result in step 3.
Are all malfunctions corrected?
YES
>> INSPECTION END
NO
>> GO TO 4.
Revision: 2013 February
2012 Murano CrossCabriolet
REAR WINDOW DEFOGGER SWITCH
DEF-17
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DTC/CIRCUIT DIAGNOSIS
REAR WINDOW DEFOGGER SWITCH
Component Function Check
INFOID:0000000007566496
1.
CHECK FUNCTION
Check that the indicator lamp of rear window defogger illuminates when rear window defogger switch is ON.
Is the inspection result normal?
YES
>> Rear window defogger switch function is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566497
1.
CHECK MULTIFUNCTION SWITCH (REAR WINDOW DEFOGGER SWITCH)
Check multifunction switch (rear window defogger switch) operate.
• BOSE audio without navigation. Refer to
AV-17, "On Board Diagnosis Function"
• BOSE audio with navigation. Refer to
AV-136, "On Board Diagnosis Function"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace the malfunctioning parts.
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-18
< DTC/CIRCUIT DIAGNOSIS >
REAR WINDOW DEFOGGER RELAY
REAR WINDOW DEFOGGER RELAY
Component Function Check
INFOID:0000000007566498
1.
CHECK FUNCTION
With CONSULT
1.
Turn ignition switch ON.
2.
Select “REAR DEFOGGER” of “BCM” using CONSULT.
3.
Select “REAR DEFOGGER” in “ACTIVE TEST” mode.
4.
Touch “ON”.
5.
Check that the rear window heating wire is getting warmer.
Is the inspection result normal?
YES
>> Rear window defogger relay power supply circuit function is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566499
1.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check 10A fuse [No.3, located in fuse block (J/B)].
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK REAR WINDOW DEFOGGER RELAY CIRCUIT 1
1.
Turn ignition switch ON.
2.
Check voltage between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> GO TO 3.
3.
CHECK REAR WINDOW DEFOGGER RELAY CIRCUIT 2
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector and fuse block (J/B).
3.
Check continuity between BCM harness connector and fuse block (J/B) harness connector.
4.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness.
(+)
(–)
Condition
Voltage (V)
(Approx.)
BCM
Connector
Terminal
M123
151
Ground
Rear window de-
fogger switch
ON
0
OFF
Battery voltage
BCM
Fuse block (J/B)
Continuity
Connector
Terminal
Connector
Terminal
M123
151
M2
4B
Existed
BCM
Ground
Continuity
Connector
Terminal
M123
151
Not existed
Revision: 2013 February
2012 Murano CrossCabriolet
REAR WINDOW DEFOGGER RELAY
DEF-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
4.
CHECK REAR WINDOW DEFOGGER RELAY
1.
Disconnect rear window defogger relay,
2.
Check rear window defogger relay.
DEF-19, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace rear window defogger relay.
5.
CHECK FUSE BLOCK (J/B)
1.
Install the rear window defogger relay.
2.
Turn ignition switch ON.
3.
Check voltage between fuse block (J/B) (fuse block side) and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace fuse block (J/B).
6.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
>> INSPECTION END
Component Inspection
INFOID:0000000007566500
1.
CHECK REAR WINDOW DEFOGGER RELAY
1.
Turn ignition switch OFF.
2.
Disconnect rear window defogger relay.
3.
Check continuity between rear window defogger relay terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace rear window defogger relay.
(+)
(–)
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
M2
4B
Ground
Battery voltage
Terminal
Condition
Continuity
Rear window
defogger relay
3
5
12 V direct current supply between termi-
nals 1 and 2
Existed
No current supply
Not existed
SEF497Y
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-20
< DTC/CIRCUIT DIAGNOSIS >
SOFT TOP CONTROL UNIT
SOFT TOP CONTROL UNIT
Component Function Check
INFOID:0000000007566501
1.
CHECK REAR WINDOW DEFOGGER
With CONSULT
1.
Turn ignition switch ON and soft top fully close.
2.
Select “REAR DEFOGGER” of “BCM” using CONSULT.
3.
Select “REAR DEFOGGER” in “ACTIVE TEST” mode.
4.
Touch “ON”.
5.
Check that the rear window heating wire is getting warmer.
Is the inspection result normal?
YES
>> Soft top control unit is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566502
1.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check the following.
-
20A fuse [No.14, located in fuse block (J/B)]
-
20A fuse [No.15, located in fuse block (J/B)]
Is the inspection result normal
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK SOFT TOP CONTROL UNIT CIRCUIT
1.
Disconnect soft top control unit connector and fuse block (J/B) connector.
2.
Check continuity between soft top control unit and fuse block (J/B) harness connector.
3.
Check continuity between soft top control unit and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness and ground.
3.
CHECK FUSE BLOCK (J/B)
1.
Turn ignition switch ON.
2.
Check voltage between fuse block (J/B) (fuse block side) and ground.
Fuse block (J/B)
Soft top control unit
Continuity
Connector
Terminal
Connector
Terminal
B6
10G
B324
49
Existed
11G
48
Soft top control unit
Ground
Continuity
Connector
Terminal
B324
49
Not existed
48
Revision: 2013 February
2012 Murano CrossCabriolet
SOFT TOP CONTROL UNIT
DEF-21
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace fuse block (J/B).
4.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
.
>> INSPECTION END.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
B6
10G
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
11G
ON
Battery voltage
OFF
0
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-22
< DTC/CIRCUIT DIAGNOSIS >
REAR WINDOW DEFOGGER
REAR WINDOW DEFOGGER
Component Function Check
INFOID:0000000007566503
1.
CHECK FUNCTION
1.
Select “REAR DEFOGGER” in “ACTIVE TEST” of “IPDM E/R” using CONSULT.
2.
Touch “On”.
3.
Check that the rear window heating wire is getting warmer.
Is the inspection result normal?
YES
>> Rear window defogger is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566504
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch ON and soft top fully close.
2.
Check voltage between rear window defogger harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK REAR WINDOW DEFOGGER CIRCUIT 1
1.
Turn power switch OFF.
2.
Disconnect condenser connector.
3.
Check continuity between condenser harness connector and rear window defogger harness connector.
4.
Check continuity between condenser connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK REAR WINDOW DEFOGGER CIRCUIT 2
1.
Turn ignition switch OFF.
2.
Disconnect soft top control unit connector.
3.
Check continuity between soft top control unit harness connector and rear window defogger harness con-
nector.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Rear window defogger
Connector
Terminal
B350
1
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
Condenser
Rear window defogger
Continuity
Connector
Terminal
Connector
Terminal
B353
2
B350
1
Existed
Condenser
Ground
Continuity
Connector
Terminal
B353
2
Not existed
Revision: 2013 February
2012 Murano CrossCabriolet
REAR WINDOW DEFOGGER
DEF-23
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
4.
Check continuity between soft top control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace soft top control unit. Refer to
RF-235, "Removal and Installation"
.
NO
>> Repair or replace harness.
4.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear window defogger connector.
3.
Check continuity between rear window defogger harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK FILAMENT
Check filament.
Refer to
DEF-23, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace filament. Refer to
DEF-34, "Inspection and Repair"
.
6.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
>> INSPECTION END
Component Inspection
INFOID:0000000007566505
1.
CHECK FILAMENT
Check the filament for damage.
Refer to
DEF-34, "Inspection and Repair"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair filament.
Soft top control unit
Condenser
Continuity
Connector
Terminal
Connector
Terminal
B327
104
B352
1
Existed
111
Soft top control unit
Ground
Continuity
Connector
Terminal
B327
104
Not existed
111
Rear window defogger
Ground
Continuity
Connector
Terminal
B351
2
Existed
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-24
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR DEFOGGER
DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000007566506
1.
CHECK DOOR MIRROR DEFOGGER
With CONSULT
1.
Turn ignition switch ON.
2.
Select “REAR DEFOGGER” of “BCM” using CONSULT.
3.
Select “REAR DEFOGGER” in “ACTIVE TEST” mode.
4.
Touch “ON”.
5.
Check that both side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Door mirror defogger is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566507
1.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check the following.
-
10A fuse (No.13, located in fuse block (J/B))
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK FUSE BLOCK (J/B)
1.
Turn ignition switch ON.
2.
Check voltage between fuse block (J/B) (fuse block side) and ground.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace fuse block (J/B).
(+)
(-)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
M3
10C
Ground
Rear window de-
fogger switch
ON
Battery voltage
OFF
0
Revision: 2013 February
2012 Murano CrossCabriolet
DRIVER SIDE DOOR MIRROR DEFOGGER
DEF-25
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DRIVER SIDE DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000007566508
1.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
With CONSULT
1.
Turn ignition switch ON.
2.
Select “REAR DEFOGGER” of “BCM” using CONSULT.
3.
Select “REAR DEFOGGER” in “ACTIVE TEST” mode.
4.
Touch “ON”.
5.
Check that the driver side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Driver side door mirror defogger is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566509
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (driver side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK FUSE BLOCK (J/B) OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect fuse block (J/B) connector.
3.
Turn ignition switch ON.
4.
Check voltage between fuse block (J/B) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace fuse block (J/B).
3.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between fuse block (J/B) harness connector and door mirror (driver side) harness con-
nector.
(+)
(-)
Condition
Voltage (V)
(Approx.)
Door mirror (driver side)
Connector
Terminal
D3
7
Ground
Rear window de-
fogger switch
ON
Battery voltage
OFF
0
(+)
(-)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
M3
10C
Ground
Rear window de-
fogger switch
ON
Battery voltage
OFF
0
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-26
< DTC/CIRCUIT DIAGNOSIS >
DRIVER SIDE DOOR MIRROR DEFOGGER
3.
Check continuity between fuse block (J/B) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace harness.
4.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
Check driver side door mirror defogger.
Refer to
DEF-26, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace door mirror (driver side).
6.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
Is the inspection result normal?
>> INSPECTION END.
Component Inspection
INFOID:0000000007566510
1.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (driver side) connector.
3.
Check continuity between door mirror terminals.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace door mirror (driver side).
Fuse block (J/B)
Door mirror (driver side)
Continuity
Connector
Terminal
Connector
Terminal
M3
10C
D3
7
Existed
Fuse block (J/B)
Ground
Continuity
Connector
Terminal
M3
10C
Ground
Not existed
Door mirror (driver side)
Ground
Continuity
Connector
Terminal
D3
19
Ground
Existed
Door mirror (driver side)
Continuity
Connector
Terminal
D3
7
19
Existed
Revision: 2013 February
2012 Murano CrossCabriolet
PASSENGER SIDE DOOR MIRROR DEFOGGER
DEF-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
PASSENGER SIDE DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000007566511
1.
CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER
With CONSULT
1.
Turn ignition switch ON.
2.
Select “REAR DEFOGGER” of “BCM” using CONSULT.
3.
Select “REAR DEFOGGER” in “ACTIVE TEST” mode.
4.
Touch “ON”.
5.
Check that the passenger side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Passenger side door mirror defogger is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000007566512
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK FUSE BLOCK (J/B) OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect fuse block (J/B) connector.
3.
Turn ignition switch ON.
4.
Check voltage between fuse block (J/B) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace fuse block (J/B).
3.
CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER
1.
Turn ignition switch OFF.
2.
Check continuity between fuse block (J/B) harness connector and door mirror (passenger side) harness
connector.
(+)
(-)
Condition
Voltage (V)
(Approx.)
Door mirror (Passenger side)
Connector
Terminal
D43
7
Ground
Rear window de-
fogger switch
ON
Battery voltage
OFF
0
(+)
(-)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
M3
10C
Ground
Rear window de-
fogger switch
ON
Battery voltage
OFF
0
Revision: 2013 February
2012 Murano CrossCabriolet
DEF-28
< DTC/CIRCUIT DIAGNOSIS >
PASSENGER SIDE DOOR MIRROR DEFOGGER
3.
Check continuity between fuse block (J/B) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace harness.
4.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER
Check passenger side door mirror defogger.
Refer to
DEF-28, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace door mirror (passenger side)..
6.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
>> INSPECTION END.
Component Inspection
INFOID:0000000007566513
1.
CHECK PASSENGER DOOR MIRROR DEFOGGER
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (passenger side) connector.
3.
Check continuity between door mirror terminals.
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace door mirror (passenger side).
Fuse block (J/B)
Door mirror (passenger side)
Continuity
Connector
Terminal Connector
Terminal
M3
10C
D43
7
Existed
Fuse block (J/B)
Ground
Continuity
Connector
Terminal
M3
10C
Ground
Not existed
Door mirror (passenger side)
Ground
Continuity
Connector
Terminal
D43
19
Ground
Existed
Door mirror (passenger side)
Continuity
Connector
Terminal
D43
7
19
Existed
Revision: 2013 February
2012 Murano CrossCabriolet
REAR WINDOW DEFOGGER AND DOOR MIRROR DEFOGGERS DO NOT OP-
ERATE
DEF-29
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
SYMPTOM DIAGNOSIS
REAR WINDOW DEFOGGER AND DOOR MIRROR DEFOGGERS DO NOT
OPERATE
Diagnosis Procedure
INFOID:0000000007566514
1.
CHECK REAR WINDOW DEFOGGER SWITCH
Check rear window defogger switch.
Refer to
DEF-17, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK REAR WINDOW DEFOGGER RELAY
Check rear window defogger relay.
Refer to
DEF-18, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Revision: 2013 February
2012 Murano CrossCabriolet
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст